[PATCH V4 2/3] ARM: mxs: add GPMI-NFC device for imx23
Huang Shijie
b32955 at freescale.com
Wed Jun 29 05:21:00 EDT 2011
Hi :
> On Wed, Jun 29, 2011 at 03:54:41PM +0800, Huang Shijie wrote:
>> add the gpmi-nfc device for imx23.
>>
>> Signed-off-by: Huang Shijie<b32955 at freescale.com>
>> ---
>> arch/arm/mach-mxs/clock-mx23.c | 1 +
>> arch/arm/mach-mxs/devices-mx23.h | 4 +
>> arch/arm/mach-mxs/devices/Kconfig | 3 +
>> arch/arm/mach-mxs/devices/Makefile | 1 +
>> arch/arm/mach-mxs/devices/platform-gpmi-nfc.c | 71 +++++++++++++++++++++++
>> arch/arm/mach-mxs/include/mach/devices-common.h | 10 +++
>> arch/arm/mach-mxs/mach-mx23evk.c | 37 ++++++++++++
> Can you split between arch and machine support please?
> (I'd not split between imx28 and imx23, but that's up to you.)
>
Ok , i will split it in the next version.
Best Regards
Huang Shijie
>> 7 files changed, 127 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-mxs/devices/platform-gpmi-nfc.c
>>
>> diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
>> index 0163b6d..e190c53 100644
>> --- a/arch/arm/mach-mxs/clock-mx23.c
>> +++ b/arch/arm/mach-mxs/clock-mx23.c
>> @@ -456,6 +456,7 @@ static struct clk_lookup lookups[] = {
>> _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
>> _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
>> _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
>> + _REGISTER_CLOCK("imx23-gpmi-nfc", NULL, gpmi_clk)
>> };
>>
>> static int clk_misc_init(void)
>> diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
>> index c6f345f..a9c495d 100644
>> --- a/arch/arm/mach-mxs/devices-mx23.h
>> +++ b/arch/arm/mach-mxs/devices-mx23.h
>> @@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst;
>> #define mx23_add_auart0() mx23_add_auart(0)
>> #define mx23_add_auart1() mx23_add_auart(1)
>>
>> +extern const struct mxs_gpmi_nfc_data mx23_gpmi_nfc_data __initconst;
>> +#define mx23_add_gpmi_nfc(pdata) \
>> + mxs_add_gpmi_nfc(pdata,&mx23_gpmi_nfc_data)
>> +
>> extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
>> #define mx23_add_mxs_mmc(id, pdata) \
>> mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
>> diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
>> index acf9eea..b42a14b 100644
>> --- a/arch/arm/mach-mxs/devices/Kconfig
>> +++ b/arch/arm/mach-mxs/devices/Kconfig
>> @@ -12,6 +12,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN
>> select HAVE_CAN_FLEXCAN if CAN
>> bool
>>
>> +config MXS_HAVE_PLATFORM_GPMI_NFC
>> + bool
>> +
>> config MXS_HAVE_PLATFORM_MXS_I2C
>> bool
>>
>> diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
>> index 351915c..972abdc 100644
>> --- a/arch/arm/mach-mxs/devices/Makefile
>> +++ b/arch/arm/mach-mxs/devices/Makefile
>> @@ -3,6 +3,7 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
>> obj-y += platform-dma.o
>> obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
>> obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
>> +obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NFC) += platform-gpmi-nfc.o
>> obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
>> obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
>> obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
>> diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nfc.c b/arch/arm/mach-mxs/devices/platform-gpmi-nfc.c
>> new file mode 100644
>> index 0000000..5a68370
>> --- /dev/null
>> +++ b/arch/arm/mach-mxs/devices/platform-gpmi-nfc.c
>> @@ -0,0 +1,71 @@
>> +/*
>> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, write to the Free Software Foundation, Inc.,
>> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
>> + */
>> +#include<asm/sizes.h>
>> +#include<mach/mx23.h>
>> +#include<mach/devices-common.h>
>> +
>> +#define RES_MEM(soc, _id, _s, _n) \
>> + { \
>> + .start = soc ##_## _id ## _BASE_ADDR, \
>> + .end = soc ##_## _id ## _BASE_ADDR + (_s) - 1,\
>> + .name = (_n), \
>> + .flags = IORESOURCE_MEM, \
>> + }
>> +
>> +#define RES_IRQ(soc, _id, _n) \
>> + { \
>> + .start = soc ##_INT_## _id, \
>> + .end = soc ##_INT_## _id, \
>> + .name = (_n), \
>> + .flags = IORESOURCE_IRQ, \
>> + }
>> +
>> +#define RES_DMA(soc, _i_s, _i_e, _n) \
>> + { \
>> + .start = soc ##_## _i_s, \
>> + .end = soc ##_## _i_e, \
>> + .name = (_n), \
>> + .flags = IORESOURCE_DMA, \
>> + }
>> +
>> +#ifdef CONFIG_SOC_IMX23
>> +const struct mxs_gpmi_nfc_data mx23_gpmi_nfc_data __initconst = {
>> + .devid = "imx23-gpmi-nfc",
>> + .res = {
>> + /* GPMI */
>> + RES_MEM(MX23, GPMI, SZ_8K, GPMI_NFC_GPMI_REGS_ADDR_RES_NAME),
>> + RES_IRQ(MX23, GPMI_ATTENTION, GPMI_NFC_GPMI_INTERRUPT_RES_NAME),
>> + /* BCH */
>> + RES_MEM(MX23, BCH, SZ_8K, GPMI_NFC_BCH_REGS_ADDR_RES_NAME),
>> + RES_IRQ(MX23, BCH, GPMI_NFC_BCH_INTERRUPT_RES_NAME),
>> + /* DMA */
>> + RES_DMA(MX23, DMA_GPMI0, DMA_GPMI3,
>> + GPMI_NFC_DMA_CHANNELS_RES_NAME),
>> + RES_IRQ(MX23, GPMI_DMA, GPMI_NFC_DMA_INTERRUPT_RES_NAME),
>> + },
>> +};
>> +#endif
>> +
>> +struct platform_device *__init
>> +mxs_add_gpmi_nfc(const struct gpmi_nfc_platform_data *pdata,
>> + const struct mxs_gpmi_nfc_data *data)
>> +{
>> + return mxs_add_platform_device_dmamask(data->devid, -1,
>> + data->res, RES_SIZE,
>> + pdata, sizeof(*pdata), DMA_BIT_MASK(32));
>> +}
>> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
>> index 812d7a8..e032120 100644
>> --- a/arch/arm/mach-mxs/include/mach/devices-common.h
>> +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
>> @@ -66,6 +66,16 @@ struct platform_device *__init mxs_add_flexcan(
>> const struct mxs_flexcan_data *data,
>> const struct flexcan_platform_data *pdata);
>>
>> +/* gpmi-nfc */
>> +#include<mach/gpmi-nfc.h>
>> +struct mxs_gpmi_nfc_data {
>> + const char *devid;
>> + const struct resource res[RES_SIZE];
>> +};
>> +struct platform_device *__init
>> +mxs_add_gpmi_nfc(const struct gpmi_nfc_platform_data *pdata,
>> + const struct mxs_gpmi_nfc_data *data);
>> +
>> /* i2c */
>> struct mxs_mxs_i2c_data {
>> int id;
>> diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
>> index 3c2de33..772b373 100644
>> --- a/arch/arm/mach-mxs/mach-mx23evk.c
>> +++ b/arch/arm/mach-mxs/mach-mx23evk.c
>> @@ -107,6 +107,42 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = {
>> (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
>> };
>>
>> +/* gpmi-nfc */
>> +#define MXS_PAD_GPMI_NFC (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
>> +static iomux_cfg_t mx23evk_gpmi_nfc_pads[] = {
>> + MX23_PAD_GPMI_D00__GPMI_D00 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D01__GPMI_D01 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D02__GPMI_D02 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D03__GPMI_D03 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D04__GPMI_D04 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D05__GPMI_D05 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D06__GPMI_D06 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_D07__GPMI_D07 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CLE__GPMI_CLE | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_ALE__GPMI_ALE | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_WPN__GPMI_WPN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_WRN__GPMI_WRN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_RDN__GPMI_RDN | MXS_PAD_GPMI_NFC,
>> + MX23_PAD_GPMI_RDY0__GPMI_RDY0 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_RDY1__GPMI_RDY1 | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CE0N__GPMI_CE0N | MXS_PAD_CTRL,
>> + MX23_PAD_GPMI_CE1N__GPMI_CE1N | MXS_PAD_CTRL,
>> +};
>> +
>> +static int mx23evk_gpmi_nfc_platform_init(void)
>> +{
>> + return mxs_iomux_setup_multiple_pads(mx23evk_gpmi_nfc_pads,
>> + ARRAY_SIZE(mx23evk_gpmi_nfc_pads));
>> +}
>> +
>> +static const
>> +struct gpmi_nfc_platform_data mx23evk_gpmi_nfc_data __initconst = {
>> + .platform_init = mx23evk_gpmi_nfc_platform_init,
>> + .min_prop_delay_in_ns = 5,
>> + .max_prop_delay_in_ns = 9,
>> + .max_chip_count = 1,
>> +};
>> +
>> /* mxsfb (lcdif) */
>> static struct fb_videomode mx23evk_video_modes[] = {
>> {
>> @@ -166,6 +202,7 @@ static void __init mx23evk_init(void)
>> else
>> gpio_set_value(MX23EVK_BL_ENABLE, 1);
>>
>> + mx23_add_gpmi_nfc(&mx23evk_gpmi_nfc_data);
>> mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
>> }
>>
>> --
>> 1.7.0.4
>>
>>
>>
More information about the linux-mtd
mailing list