[PATCH] MTD: pxa3xx_nand: enable multiple chip select support
Igor Grinberg
grinberg at compulab.co.il
Wed Jun 22 09:45:11 EDT 2011
Hi Lei,
Some comments from a quick look...
On 06/22/11 06:17, Lei Wen wrote:
> Current pxa3xx_nand controller has two chip select which
> both be workable. This patch enable this feature.
>
> Update platform driver to support this feature.
>
> Another notice should be taken that:
> When you want to use this feature, you should not enable the
> keep configuration feature, for two chip select could be
> attached with different nand chip. The different page size
> and timing requirement make the keep configuration impossible.
You should _also_ put this comment inside the pxa3xx_nand.h
may be even inside the pxa3xx_nand_platform_data structure,
so people would not have to search the git log to find this problem.
> Signed-off-by: Lei Wen <leiwen at marvell.com>
> ---
> arch/arm/mach-mmp/aspenite.c | 5 +-
> arch/arm/mach-pxa/cm-x300.c | 5 +-
> arch/arm/mach-pxa/colibri-pxa3xx.c | 5 +-
> arch/arm/mach-pxa/littleton.c | 5 +-
> arch/arm/mach-pxa/mxm8x10.c | 9 +-
> arch/arm/mach-pxa/raumfeld.c | 5 +-
> arch/arm/mach-pxa/zylonite.c | 5 +-
> arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 8 +-
> drivers/mtd/nand/pxa3xx_nand.c | 735 +++++++++++++++-----------
> 9 files changed, 444 insertions(+), 338 deletions(-)
>
> diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
> index 06b5fa8..b6589d6 100644
> --- a/arch/arm/mach-mmp/aspenite.c
> +++ b/arch/arm/mach-mmp/aspenite.c
> @@ -167,8 +167,9 @@ static struct mtd_partition aspenite_nand_partitions[] = {
>
> static struct pxa3xx_nand_platform_data aspenite_nand_info = {
> .enable_arbiter = 1,
> - .parts = aspenite_nand_partitions,
> - .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = aspenite_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
> };
>
> static struct i2c_board_info aspenite_i2c_info[] __initdata = {
> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
> index b2248e7..d67eb7b 100644
> --- a/arch/arm/mach-pxa/cm-x300.c
> +++ b/arch/arm/mach-pxa/cm-x300.c
> @@ -423,8 +423,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
> static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
> .enable_arbiter = 1,
> .keep_config = 1,
> - .parts = cm_x300_nand_partitions,
> - .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = cm_x300_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
> };
>
> static void __init cm_x300_init_nand(void)
> diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
> index 3f9be41..ff7a07b 100644
> --- a/arch/arm/mach-pxa/colibri-pxa3xx.c
> +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
> @@ -139,8 +139,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
> static struct pxa3xx_nand_platform_data colibri_nand_info = {
> .enable_arbiter = 1,
> .keep_config = 1,
> - .parts = colibri_nand_partitions,
> - .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = colibri_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions),
> };
>
> void __init colibri_pxa3xx_init_nand(void)
> diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
> index e5e326d..6eaf852 100644
> --- a/arch/arm/mach-pxa/littleton.c
> +++ b/arch/arm/mach-pxa/littleton.c
> @@ -325,8 +325,9 @@ static struct mtd_partition littleton_nand_partitions[] = {
>
> static struct pxa3xx_nand_platform_data littleton_nand_info = {
> .enable_arbiter = 1,
> - .parts = littleton_nand_partitions,
> - .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = littleton_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions),
> };
>
> static void __init littleton_init_nand(void)
> diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
> index b5a8fd3..e7ce135 100644
> --- a/arch/arm/mach-pxa/mxm8x10.c
> +++ b/arch/arm/mach-pxa/mxm8x10.c
> @@ -389,10 +389,11 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
> };
>
> static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
> - .enable_arbiter = 1,
> - .keep_config = 1,
> - .parts = mxm_8x10_nand_partitions,
> - .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
> + .enable_arbiter = 1,
> + .keep_config = 1,
> + .cs_num = 1,
> + .parts[0] = mxm_8x10_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions)
> };
>
> static void __init mxm_8x10_nand_init(void)
> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
> index d130f77..a54846d 100644
> --- a/arch/arm/mach-pxa/raumfeld.c
> +++ b/arch/arm/mach-pxa/raumfeld.c
> @@ -349,8 +349,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
> static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
> .enable_arbiter = 1,
> .keep_config = 1,
> - .parts = raumfeld_nand_partitions,
> - .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = raumfeld_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions),
> };
>
> /**
> diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
> index 5821185..ea4752a 100644
> --- a/arch/arm/mach-pxa/zylonite.c
> +++ b/arch/arm/mach-pxa/zylonite.c
> @@ -366,8 +366,9 @@ static struct mtd_partition zylonite_nand_partitions[] = {
>
> static struct pxa3xx_nand_platform_data zylonite_nand_info = {
> .enable_arbiter = 1,
> - .parts = zylonite_nand_partitions,
> - .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
> + .cs_num = 1,
> + .parts[0] = zylonite_nand_partitions,
> + .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions),
> };
>
> static void __init zylonite_init_nand(void)
> diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
> index 442301f..34a3f52 100644
> --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
> +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
> @@ -41,6 +41,8 @@ struct pxa3xx_nand_flash {
> struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
> };
>
> +/* The max num of chip select current support */
/* The maximum number of chip selects currently supported */
> +#define NUM_CHIP_SELECT (2)
> struct pxa3xx_nand_platform_data {
>
> /* the data flash bus is shared between the Static Memory
> @@ -52,8 +54,10 @@ struct pxa3xx_nand_platform_data {
> /* allow platform code to keep OBM/bootloader defined NFC config */
> int keep_config;
>
> - const struct mtd_partition *parts;
> - unsigned int nr_parts;
> + /* indicate how many chip select would be used for this platform */
/* indicate how many chip selects will be used */
> + int cs_num;
This name is too confusing, I think even num_cs is better or cs_count?
Also, may be align it with the others?
> + const struct mtd_partition *parts[NUM_CHIP_SELECT];
> + unsigned int nr_parts[NUM_CHIP_SELECT];
>
> const struct pxa3xx_nand_flash * flash;
> size_t num_flash;
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 30689cc..259b8d5 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -92,11 +92,13 @@
> #define NDCB0_ADDR_CYC_SHIFT (16)
>
> /* macros for registers read/write */
> -#define nand_writel(info, off, val) \
> - __raw_writel((val), (info)->mmio_base + (off))
> +#define nand_writel(nand, off, val) \
> + __raw_writel((val), (nand)->mmio_base + (off))
>
> -#define nand_readl(info, off) \
> - __raw_readl((info)->mmio_base + (off))
> +#define nand_readl(nand, off) \
> + __raw_readl((nand)->mmio_base + (off))
> +#define get_mtd_by_info(info) \
> + (struct mtd_info *)((void *)info - sizeof(struct mtd_info))
>
> /* error code and state */
> enum {
> @@ -110,6 +112,7 @@ enum {
>
> enum {
> STATE_IDLE = 0,
> + STATE_PREPARED,
> STATE_CMD_HANDLE,
> STATE_DMA_READING,
> STATE_DMA_WRITING,
> @@ -123,63 +126,63 @@ enum {
> struct pxa3xx_nand_info {
> struct nand_chip nand_chip;
>
> - struct nand_hw_control controller;
> - struct platform_device *pdev;
> struct pxa3xx_nand_cmdset *cmdset;
> + /* page size of attached chip */
> + uint16_t page_size;
> + uint8_t chip_select;
> + uint8_t use_ecc;
> +
> + /* calculated from pxa3xx_nand_flash data */
> + uint8_t col_addr_cycles;
> + uint8_t row_addr_cycles;
> + uint8_t read_id_bytes;
> +
> + /* cached register value */
> + uint32_t reg_ndcr;
> + uint32_t ndtr0cs0;
> + uint32_t ndtr1cs0;
>
> + void *nand_data;
> +};
> +
> +struct pxa3xx_nand {
> struct clk *clk;
> void __iomem *mmio_base;
> unsigned long mmio_phys;
> + struct nand_hw_control controller;
> + struct completion cmd_complete;
> + struct platform_device *pdev;
please, align
>
> - unsigned int buf_start;
> - unsigned int buf_count;
> -
> - struct mtd_info *mtd;
> /* DMA information */
> int drcmr_dat;
> int drcmr_cmd;
> -
> - unsigned char *data_buff;
> - unsigned char *oob_buff;
> - dma_addr_t data_buff_phys;
> - size_t data_buff_size;
> int data_dma_ch;
> - struct pxa_dma_desc *data_desc;
> + dma_addr_t data_buff_phys;
> dma_addr_t data_desc_addr;
> + struct pxa_dma_desc *data_desc;
>
> - uint32_t reg_ndcr;
> -
> - /* saved column/page_addr during CMD_SEQIN */
> - int seqin_column;
> - int seqin_page_addr;
> + struct pxa3xx_nand_info *info[NUM_CHIP_SELECT];
> + uint32_t command;
> + uint16_t data_size; /* data size in FIFO */
> + uint16_t oob_size;
> + unsigned char *data_buff;
> + unsigned char *oob_buff;
> + uint32_t buf_start;
> + uint32_t buf_count;
>
> /* relate to the command */
> unsigned int state;
> -
> + uint8_t chip_select;
> int use_ecc; /* use HW ECC ? */
> int use_dma; /* use DMA ? */
> int is_ready;
> -
> - unsigned int page_size; /* page size of attached chip */
> - unsigned int data_size; /* data size in FIFO */
> int retcode;
> - struct completion cmd_complete;
>
> /* generated NDCBx register values */
> + uint8_t total_cmds;
> uint32_t ndcb0;
> uint32_t ndcb1;
> uint32_t ndcb2;
> -
> - /* timing calcuted from setting */
> - uint32_t ndtr0cs0;
> - uint32_t ndtr1cs0;
> -
> - /* calculated from pxa3xx_nand_flash data */
> - size_t oob_size;
> - size_t read_id_bytes;
> -
> - unsigned int col_addr_cycles;
> - unsigned int row_addr_cycles;
> };
It looks like if you switch the names of the structures above,
then the patch will be much shorter and cleaner,
but will it make structures meaning confusion?
>
> static int use_dma = 1;
> @@ -225,7 +228,7 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
> /* Define a default flash type setting serve as flash detecting only */
> #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
>
> -const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
> +const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
>
> #define NDTR0_tCH(c) (min((c), 7) << 19)
> #define NDTR0_tCS(c) (min((c), 7) << 16)
> @@ -244,9 +247,11 @@ const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
> static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
> const struct pxa3xx_nand_timing *t)
> {
> - unsigned long nand_clk = clk_get_rate(info->clk);
> + struct pxa3xx_nand *nand = info->nand_data;
> + unsigned long nand_clk;
> uint32_t ndtr0, ndtr1;
>
> + nand_clk = clk_get_rate(nand->clk);
> ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
> NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
> NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
> @@ -260,26 +265,27 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
>
> info->ndtr0cs0 = ndtr0;
> info->ndtr1cs0 = ndtr1;
> - nand_writel(info, NDTR0CS0, ndtr0);
> - nand_writel(info, NDTR1CS0, ndtr1);
> + nand_writel(nand, NDTR0CS0, ndtr0);
> + nand_writel(nand, NDTR1CS0, ndtr1);
> }
>
> static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
> {
> + struct pxa3xx_nand *nand = info->nand_data;
> int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
>
> - info->data_size = info->page_size;
> + nand->data_size = info->page_size;
> if (!oob_enable) {
> - info->oob_size = 0;
> + nand->oob_size = 0;
> return;
> }
>
> switch (info->page_size) {
> case 2048:
> - info->oob_size = (info->use_ecc) ? 40 : 64;
> + nand->oob_size = (info->use_ecc) ? 40 : 64;
> break;
> case 512:
> - info->oob_size = (info->use_ecc) ? 8 : 16;
> + nand->oob_size = (info->use_ecc) ? 8 : 16;
> break;
> }
> }
> @@ -290,185 +296,189 @@ static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
> * We enable all the interrupt at the same time, and
> * let pxa3xx_nand_irq to handle all logic.
> */
> -static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
> +static void pxa3xx_nand_start(struct pxa3xx_nand *nand)
> {
> + struct pxa3xx_nand_info *info;
> uint32_t ndcr;
>
> + info = nand->info[nand->chip_select];
> ndcr = info->reg_ndcr;
> - ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
> - ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
> + ndcr |= nand->use_ecc ? NDCR_ECC_EN : 0;
> + ndcr |= nand->use_dma ? NDCR_DMA_EN : 0;
> ndcr |= NDCR_ND_RUN;
>
> /* clear status bits and run */
> - nand_writel(info, NDCR, 0);
> - nand_writel(info, NDSR, NDSR_MASK);
> - nand_writel(info, NDCR, ndcr);
> + nand_writel(nand, NDCR, 0);
> + nand_writel(nand, NDSR, NDSR_MASK);
> + nand_writel(nand, NDCR, ndcr);
> }
>
> -static void pxa3xx_nand_stop(struct pxa3xx_nand_info *info)
> +static void pxa3xx_nand_stop(struct pxa3xx_nand *nand)
> {
> uint32_t ndcr;
> int timeout = NAND_STOP_DELAY;
>
> /* wait RUN bit in NDCR become 0 */
> - ndcr = nand_readl(info, NDCR);
> + ndcr = nand_readl(nand, NDCR);
> while ((ndcr & NDCR_ND_RUN) && (timeout-- > 0)) {
> - ndcr = nand_readl(info, NDCR);
> + ndcr = nand_readl(nand, NDCR);
> udelay(1);
> }
>
> if (timeout <= 0) {
> ndcr &= ~NDCR_ND_RUN;
> - nand_writel(info, NDCR, ndcr);
> + nand_writel(nand, NDCR, ndcr);
> }
> /* clear status bits */
> - nand_writel(info, NDSR, NDSR_MASK);
> + nand_writel(nand, NDSR, NDSR_MASK);
> }
>
> -static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
> +static void enable_int(struct pxa3xx_nand *nand, uint32_t int_mask)
> {
> uint32_t ndcr;
>
> - ndcr = nand_readl(info, NDCR);
> - nand_writel(info, NDCR, ndcr & ~int_mask);
> + ndcr = nand_readl(nand, NDCR);
> + nand_writel(nand, NDCR, ndcr & ~int_mask);
> }
>
> -static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
> +static void disable_int(struct pxa3xx_nand *nand, uint32_t int_mask)
> {
> uint32_t ndcr;
>
> - ndcr = nand_readl(info, NDCR);
> - nand_writel(info, NDCR, ndcr | int_mask);
> + ndcr = nand_readl(nand, NDCR);
> + nand_writel(nand, NDCR, ndcr | int_mask);
> }
>
> -static void handle_data_pio(struct pxa3xx_nand_info *info)
> +static void handle_data_pio(struct pxa3xx_nand *nand)
> {
> - switch (info->state) {
> + switch (nand->state) {
> case STATE_PIO_WRITING:
> - __raw_writesl(info->mmio_base + NDDB, info->data_buff,
> - DIV_ROUND_UP(info->data_size, 4));
> - if (info->oob_size > 0)
> - __raw_writesl(info->mmio_base + NDDB, info->oob_buff,
> - DIV_ROUND_UP(info->oob_size, 4));
> + __raw_writesl(nand->mmio_base + NDDB, nand->data_buff,
> + DIV_ROUND_UP(nand->data_size, 4));
> + if (nand->oob_size > 0)
> + __raw_writesl(nand->mmio_base + NDDB, nand->oob_buff,
> + DIV_ROUND_UP(nand->oob_size, 4));
> break;
> case STATE_PIO_READING:
> - __raw_readsl(info->mmio_base + NDDB, info->data_buff,
> - DIV_ROUND_UP(info->data_size, 4));
> - if (info->oob_size > 0)
> - __raw_readsl(info->mmio_base + NDDB, info->oob_buff,
> - DIV_ROUND_UP(info->oob_size, 4));
> + __raw_readsl(nand->mmio_base + NDDB, nand->data_buff,
> + DIV_ROUND_UP(nand->data_size, 4));
> + if (nand->oob_size > 0)
> + __raw_readsl(nand->mmio_base + NDDB, nand->oob_buff,
> + DIV_ROUND_UP(nand->oob_size, 4));
> break;
> default:
> printk(KERN_ERR "%s: invalid state %d\n", __func__,
> - info->state);
> + nand->state);
> BUG();
> }
> }
>
> -static void start_data_dma(struct pxa3xx_nand_info *info)
> +static void start_data_dma(struct pxa3xx_nand *nand)
> {
> - struct pxa_dma_desc *desc = info->data_desc;
> - int dma_len = ALIGN(info->data_size + info->oob_size, 32);
> + struct pxa_dma_desc *desc = nand->data_desc;
> + int dma_len = ALIGN(nand->data_size + nand->oob_size, 32);
>
> desc->ddadr = DDADR_STOP;
> desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
>
> - switch (info->state) {
> + switch (nand->state) {
> case STATE_DMA_WRITING:
> - desc->dsadr = info->data_buff_phys;
> - desc->dtadr = info->mmio_phys + NDDB;
> + desc->dsadr = nand->data_buff_phys;
> + desc->dtadr = nand->mmio_phys + NDDB;
> desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
> break;
> case STATE_DMA_READING:
> - desc->dtadr = info->data_buff_phys;
> - desc->dsadr = info->mmio_phys + NDDB;
> + desc->dtadr = nand->data_buff_phys;
> + desc->dsadr = nand->mmio_phys + NDDB;
> desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
> break;
> default:
> printk(KERN_ERR "%s: invalid state %d\n", __func__,
> - info->state);
> + nand->state);
> BUG();
> }
>
> - DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
> - DDADR(info->data_dma_ch) = info->data_desc_addr;
> - DCSR(info->data_dma_ch) |= DCSR_RUN;
> + DRCMR(nand->drcmr_dat) = DRCMR_MAPVLD | nand->data_dma_ch;
> + DDADR(nand->data_dma_ch) = nand->data_desc_addr;
> + DCSR(nand->data_dma_ch) |= DCSR_RUN;
> }
>
> static void pxa3xx_nand_data_dma_irq(int channel, void *data)
> {
> - struct pxa3xx_nand_info *info = data;
> + struct pxa3xx_nand *nand = data;
> uint32_t dcsr;
>
> dcsr = DCSR(channel);
> DCSR(channel) = dcsr;
>
> if (dcsr & DCSR_BUSERR) {
> - info->retcode = ERR_DMABUSERR;
> + nand->retcode = ERR_DMABUSERR;
> }
>
> - info->state = STATE_DMA_DONE;
> - enable_int(info, NDCR_INT_MASK);
> - nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
> + nand->state = STATE_DMA_DONE;
> + enable_int(nand, NDCR_INT_MASK);
> + nand_writel(nand, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
> }
>
> static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
> {
> - struct pxa3xx_nand_info *info = devid;
> - unsigned int status, is_completed = 0;
> + struct pxa3xx_nand *nand = devid;
> + struct pxa3xx_nand_info *info;
> + unsigned int status, is_completed = 0, cs;
> + unsigned int ready, cmd_done, page_done, badblock_detect;
>
> - status = nand_readl(info, NDSR);
> + cs = nand->chip_select;
> + ready = (cs) ? NDSR_RDY : NDSR_FLASH_RDY;
> + cmd_done = (cs) ? NDSR_CS1_CMDD : NDSR_CS0_CMDD;
> + page_done = (cs) ? NDSR_CS1_PAGED : NDSR_CS0_PAGED;
> + badblock_detect = (cs) ? NDSR_CS1_BBD : NDSR_CS0_BBD;
This is confusing... do you use to ?: operator for differentiating between
cs = 0 and cs = 1?
I think this is a bad idea.
Moreover, the use of ?: is discouraged among the kernel.
> + info = nand->info[cs];
>
> + status = nand_readl(nand, NDSR);
> if (status & NDSR_DBERR)
> - info->retcode = ERR_DBERR;
> + nand->retcode = ERR_DBERR;
> if (status & NDSR_SBERR)
> - info->retcode = ERR_SBERR;
> + nand->retcode = ERR_SBERR;
> if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
> /* whether use dma to transfer data */
> - if (info->use_dma) {
> - disable_int(info, NDCR_INT_MASK);
> - info->state = (status & NDSR_RDDREQ) ?
> + if (nand->use_dma) {
> + disable_int(nand, NDCR_INT_MASK);
> + nand->state = (status & NDSR_RDDREQ) ?
> STATE_DMA_READING : STATE_DMA_WRITING;
> - start_data_dma(info);
> + start_data_dma(nand);
> goto NORMAL_IRQ_EXIT;
> } else {
> - info->state = (status & NDSR_RDDREQ) ?
> + nand->state = (status & NDSR_RDDREQ) ?
> STATE_PIO_READING : STATE_PIO_WRITING;
> - handle_data_pio(info);
> + handle_data_pio(nand);
> }
> }
> - if (status & NDSR_CS0_CMDD) {
> - info->state = STATE_CMD_DONE;
> + if (status & cmd_done) {
> + nand->state = STATE_CMD_DONE;
> is_completed = 1;
> }
> - if (status & NDSR_FLASH_RDY) {
> - info->is_ready = 1;
> - info->state = STATE_READY;
> + if (status & ready) {
> + nand->is_ready = 1;
> + nand->state = STATE_READY;
> }
>
> if (status & NDSR_WRCMDREQ) {
> - nand_writel(info, NDSR, NDSR_WRCMDREQ);
> + nand_writel(nand, NDSR, NDSR_WRCMDREQ);
> status &= ~NDSR_WRCMDREQ;
> - info->state = STATE_CMD_HANDLE;
> - nand_writel(info, NDCB0, info->ndcb0);
> - nand_writel(info, NDCB0, info->ndcb1);
> - nand_writel(info, NDCB0, info->ndcb2);
> + nand->state = STATE_CMD_HANDLE;
> + nand_writel(nand, NDCB0, nand->ndcb0);
> + nand_writel(nand, NDCB0, nand->ndcb1);
> + nand_writel(nand, NDCB0, nand->ndcb2);
> }
>
> /* clear NDSR to let the controller exit the IRQ */
> - nand_writel(info, NDSR, status);
> + nand_writel(nand, NDSR, status);
> if (is_completed)
> - complete(&info->cmd_complete);
> + complete(&nand->cmd_complete);
> NORMAL_IRQ_EXIT:
> return IRQ_HANDLED;
> }
>
> -static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
> -{
> - struct pxa3xx_nand_info *info = mtd->priv;
> - return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
> -}
> -
> static inline int is_buf_blank(uint8_t *buf, size_t len)
> {
> for (; len > 0; len--)
> @@ -477,42 +487,49 @@ static inline int is_buf_blank(uint8_t *buf, size_t len)
> return 1;
> }
>
> -static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
> +static int prepare_command_pool(struct pxa3xx_nand *nand, int command,
> uint16_t column, int page_addr)
> {
> uint16_t cmd;
> int addr_cycle, exec_cmd, ndcb0;
> - struct mtd_info *mtd = info->mtd;
> + struct mtd_info *mtd;
> + struct pxa3xx_nand_info *info = nand->info[nand->chip_select];
>
> - ndcb0 = 0;
> + mtd = get_mtd_by_info(info);
> + ndcb0 = (nand->chip_select) ? NDCB0_CSEL : 0;
This one is confusing too...
Besides, you don't need the parenthesis.
> addr_cycle = 0;
> exec_cmd = 1;
>
> /* reset data and oob column point to handle data */
> - info->buf_start = 0;
> - info->buf_count = 0;
> - info->oob_size = 0;
> - info->use_ecc = 0;
> - info->is_ready = 0;
> - info->retcode = ERR_NONE;
> + nand->buf_start = 0;
> + nand->buf_count = 0;
> + nand->oob_size = 0;
> + nand->use_ecc = 0;
> + nand->is_ready = 0;
> + nand->retcode = ERR_NONE;
> + nand->data_size = 0;
> + nand->use_dma = 0;
> + nand->command = command;
>
> switch (command) {
> case NAND_CMD_READ0:
> case NAND_CMD_PAGEPROG:
> - info->use_ecc = 1;
> + nand->use_ecc = 1;
> case NAND_CMD_READOOB:
> pxa3xx_set_datasize(info);
> + nand->oob_buff = nand->data_buff + nand->data_size;
> + nand->use_dma = use_dma;
> break;
> case NAND_CMD_SEQIN:
> exec_cmd = 0;
> break;
> default:
> - info->ndcb1 = 0;
> - info->ndcb2 = 0;
> + nand->ndcb1 = 0;
> + nand->ndcb2 = 0;
> break;
> }
>
> - info->ndcb0 = ndcb0;
> + nand->ndcb0 = ndcb0;
> addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
> + info->col_addr_cycles);
>
> @@ -521,16 +538,16 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
> case NAND_CMD_READ0:
> cmd = info->cmdset->read1;
> if (command == NAND_CMD_READOOB)
> - info->buf_start = mtd->writesize + column;
> + nand->buf_start = mtd->writesize + column;
> else
> - info->buf_start = column;
> + nand->buf_start = column;
>
> if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
> - info->ndcb0 |= NDCB0_CMD_TYPE(0)
> + nand->ndcb0 |= NDCB0_CMD_TYPE(0)
> | addr_cycle
> | (cmd & NDCB0_CMD1_MASK);
> else
> - info->ndcb0 |= NDCB0_CMD_TYPE(0)
> + nand->ndcb0 |= NDCB0_CMD_TYPE(0)
> | NDCB0_DBC
> | addr_cycle
> | cmd;
> @@ -538,34 +555,34 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
> case NAND_CMD_SEQIN:
> /* small page addr setting */
> if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
> - info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
> + nand->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
> | (column & 0xFF);
>
> - info->ndcb2 = 0;
> + nand->ndcb2 = 0;
> } else {
> - info->ndcb1 = ((page_addr & 0xFFFF) << 16)
> + nand->ndcb1 = ((page_addr & 0xFFFF) << 16)
> | (column & 0xFFFF);
>
> if (page_addr & 0xFF0000)
> - info->ndcb2 = (page_addr & 0xFF0000) >> 16;
> + nand->ndcb2 = (page_addr & 0xFF0000) >> 16;
> else
> - info->ndcb2 = 0;
> + nand->ndcb2 = 0;
> }
>
> - info->buf_count = mtd->writesize + mtd->oobsize;
> - memset(info->data_buff, 0xFF, info->buf_count);
> + nand->buf_count = mtd->writesize + mtd->oobsize;
> + memset(nand->data_buff, 0xFF, nand->buf_count);
>
> break;
>
> case NAND_CMD_PAGEPROG:
> - if (is_buf_blank(info->data_buff,
> + if (is_buf_blank(nand->data_buff,
> (mtd->writesize + mtd->oobsize))) {
> exec_cmd = 0;
> break;
> }
>
> cmd = info->cmdset->program;
> - info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
> + nand->ndcb0 |= NDCB0_CMD_TYPE(0x1)
> | NDCB0_AUTO_RS
> | NDCB0_ST_ROW_EN
> | NDCB0_DBC
> @@ -575,37 +592,37 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
>
> case NAND_CMD_READID:
> cmd = info->cmdset->read_id;
> - info->buf_count = info->read_id_bytes;
> - info->ndcb0 |= NDCB0_CMD_TYPE(3)
> + nand->buf_count = info->read_id_bytes;
> + nand->ndcb0 |= NDCB0_CMD_TYPE(3)
> | NDCB0_ADDR_CYC(1)
> | cmd;
>
> - info->data_size = 8;
> + nand->data_size = 8;
> break;
> case NAND_CMD_STATUS:
> cmd = info->cmdset->read_status;
> - info->buf_count = 1;
> - info->ndcb0 |= NDCB0_CMD_TYPE(4)
> + nand->buf_count = 1;
> + nand->ndcb0 |= NDCB0_CMD_TYPE(4)
> | NDCB0_ADDR_CYC(1)
> | cmd;
>
> - info->data_size = 8;
> + nand->data_size = 8;
> break;
>
> case NAND_CMD_ERASE1:
> cmd = info->cmdset->erase;
> - info->ndcb0 |= NDCB0_CMD_TYPE(2)
> + nand->ndcb0 |= NDCB0_CMD_TYPE(2)
> | NDCB0_AUTO_RS
> | NDCB0_ADDR_CYC(3)
> | NDCB0_DBC
> | cmd;
> - info->ndcb1 = page_addr;
> - info->ndcb2 = 0;
> + nand->ndcb1 = page_addr;
> + nand->ndcb2 = 0;
>
> break;
> case NAND_CMD_RESET:
> cmd = info->cmdset->reset;
> - info->ndcb0 |= NDCB0_CMD_TYPE(5)
> + nand->ndcb0 |= NDCB0_CMD_TYPE(5)
> | cmd;
>
> break;
> @@ -628,6 +645,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
> int column, int page_addr)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> + struct pxa3xx_nand *nand = info->nand_data;
> int ret, exec_cmd;
>
> /*
> @@ -638,20 +656,32 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
> if (info->reg_ndcr & NDCR_DWIDTH_M)
> column /= 2;
>
> - exec_cmd = prepare_command_pool(info, command, column, page_addr);
> + /*
> + * There may be different NAND chip hooked to
> + * different chip select, so check whether
> + * chip select has been changed, if yes, reset the timing
> + */
> + if (nand->chip_select != info->chip_select) {
> + nand->chip_select = info->chip_select;
> + nand_writel(nand, NDTR0CS0, info->ndtr0cs0);
> + nand_writel(nand, NDTR1CS0, info->ndtr1cs0);
> + }
> +
> + nand->state = STATE_PREPARED;
> + exec_cmd = prepare_command_pool(nand, command, column, page_addr);
> if (exec_cmd) {
> - init_completion(&info->cmd_complete);
> - pxa3xx_nand_start(info);
> + init_completion(&nand->cmd_complete);
> + pxa3xx_nand_start(nand);
>
> - ret = wait_for_completion_timeout(&info->cmd_complete,
> + ret = wait_for_completion_timeout(&nand->cmd_complete,
> CHIP_DELAY_TIMEOUT);
> if (!ret) {
> printk(KERN_ERR "Wait time out!!!\n");
> /* Stop State Machine for next command cycle */
> - pxa3xx_nand_stop(info);
> + pxa3xx_nand_stop(nand);
> }
> - info->state = STATE_IDLE;
> }
> + nand->state = STATE_IDLE;
> }
>
> static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
> @@ -665,11 +695,12 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
> struct nand_chip *chip, uint8_t *buf, int page)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> + struct pxa3xx_nand *nand = info->nand_data;
>
> chip->read_buf(mtd, buf, mtd->writesize);
> chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
>
> - if (info->retcode == ERR_SBERR) {
> + if (nand->retcode == ERR_SBERR) {
> switch (info->use_ecc) {
> case 1:
> mtd->ecc_stats.corrected++;
> @@ -678,14 +709,14 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
> default:
> break;
> }
> - } else if (info->retcode == ERR_DBERR) {
> + } else if (nand->retcode == ERR_DBERR) {
> /*
> * for blank page (all 0xff), HW will calculate its ECC as
> * 0, which is different from the ECC information within
> * OOB, ignore such double bit errors
> */
> if (is_buf_blank(buf, mtd->writesize))
> - info->retcode = ERR_NONE;
> + nand->retcode = ERR_NONE;
> else
> mtd->ecc_stats.failed++;
> }
> @@ -696,11 +727,12 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
> static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> + struct pxa3xx_nand *nand = info->nand_data;
> char retval = 0xFF;
>
> - if (info->buf_start < info->buf_count)
> + if (nand->buf_start < nand->buf_count)
> /* Has just send a new command? */
> - retval = info->data_buff[info->buf_start++];
> + retval = nand->data_buff[nand->buf_start++];
>
> return retval;
> }
> @@ -708,11 +740,12 @@ static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
> static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> + struct pxa3xx_nand *nand = info->nand_data;
> u16 retval = 0xFFFF;
>
> - if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
> - retval = *((u16 *)(info->data_buff+info->buf_start));
> - info->buf_start += 2;
> + if (!(nand->buf_start & 0x01) && nand->buf_start < nand->buf_count) {
> + retval = *((u16 *)(nand->data_buff+nand->buf_start));
> + nand->buf_start += 2;
> }
> return retval;
> }
> @@ -720,20 +753,22 @@ static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
> static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> - int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
> + struct pxa3xx_nand *nand = info->nand_data;
> + int real_len = min_t(size_t, len, nand->buf_count - nand->buf_start);
>
> - memcpy(buf, info->data_buff + info->buf_start, real_len);
> - info->buf_start += real_len;
> + memcpy(buf, nand->data_buff + nand->buf_start, real_len);
> + nand->buf_start += real_len;
> }
>
> static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
> const uint8_t *buf, int len)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> - int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
> + struct pxa3xx_nand *nand = info->nand_data;
> + int real_len = min_t(size_t, len, nand->buf_count - nand->buf_start);
>
> - memcpy(info->data_buff + info->buf_start, buf, real_len);
> - info->buf_start += real_len;
> + memcpy(nand->data_buff + nand->buf_start, buf, real_len);
> + nand->buf_start += real_len;
> }
>
> static int pxa3xx_nand_verify_buf(struct mtd_info *mtd,
> @@ -750,10 +785,11 @@ static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
> static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> + struct pxa3xx_nand *nand = info->nand_data;
>
> /* pxa3xx_nand_send_command has waited for command complete */
> if (this->state == FL_WRITING || this->state == FL_ERASING) {
> - if (info->retcode == ERR_NONE)
> + if (nand->retcode == ERR_NONE)
> return 0;
> else {
> /*
> @@ -770,7 +806,8 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
> static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
> const struct pxa3xx_nand_flash *f)
> {
> - struct platform_device *pdev = info->pdev;
> + struct pxa3xx_nand *nand = info->nand_data;
> + struct platform_device *pdev = nand->pdev;
> struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
> uint32_t ndcr = 0x0; /* enable all interrupts */
>
> @@ -804,6 +841,7 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
> ndcr |= NDCR_SPARE_EN; /* enable spare by default */
>
> info->reg_ndcr = ndcr;
> + info->use_ecc = 1;
>
> pxa3xx_nand_set_timing(info, f->timing);
> return 0;
> @@ -811,15 +849,22 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
>
> static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
> {
> - uint32_t ndcr = nand_readl(info, NDCR);
> + struct pxa3xx_nand *nand = info->nand_data;
> + uint32_t ndcr = nand_readl(nand, NDCR);
> +
> + if (info->chip_select > 0) {
> + printk(KERN_ERR "We could not detect configure"
> + " if more than one cs is supported!!\n");
> + BUG();
like Daniel already noticed, may be dev_err() is enough?
> + }
> info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
> /* set info fields needed to read id */
> info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
> info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
> info->cmdset = &default_cmdset;
>
> - info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
> - info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
> + info->ndtr0cs0 = nand_readl(nand, NDTR0CS0);
> + info->ndtr1cs0 = nand_readl(nand, NDTR1CS0);
>
> return 0;
> }
> @@ -830,50 +875,31 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
> */
> #define MAX_BUFF_SIZE PAGE_SIZE
>
> -static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
> +static void free_cs_resource(struct pxa3xx_nand_info *info, int cs)
> {
> - struct platform_device *pdev = info->pdev;
> - int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
> -
> - if (use_dma == 0) {
> - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
> - if (info->data_buff == NULL)
> - return -ENOMEM;
> - return 0;
> - }
> -
> - info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
> - &info->data_buff_phys, GFP_KERNEL);
> - if (info->data_buff == NULL) {
> - dev_err(&pdev->dev, "failed to allocate dma buffer\n");
> - return -ENOMEM;
> - }
> -
> - info->data_buff_size = MAX_BUFF_SIZE;
> - info->data_desc = (void *)info->data_buff + data_desc_offset;
> - info->data_desc_addr = info->data_buff_phys + data_desc_offset;
> + struct pxa3xx_nand *nand;
> + struct mtd_info *mtd;
>
> - info->data_dma_ch = pxa_request_dma("nand-data", DMA_PRIO_LOW,
> - pxa3xx_nand_data_dma_irq, info);
> - if (info->data_dma_ch < 0) {
> - dev_err(&pdev->dev, "failed to request data dma\n");
> - dma_free_coherent(&pdev->dev, info->data_buff_size,
> - info->data_buff, info->data_buff_phys);
> - return info->data_dma_ch;
> - }
> + if (!info)
> + return;
>
> - return 0;
> + nand = info->nand_data;
> + mtd = get_mtd_by_info(info);
> + kfree(mtd);
> + nand->info[cs] = NULL;
> }
>
> static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
> {
> - struct mtd_info *mtd = info->mtd;
> + struct pxa3xx_nand *nand = info->nand_data;
> + struct mtd_info *mtd = get_mtd_by_info(info);
> struct nand_chip *chip = mtd->priv;
>
> /* use the common timing to make a try */
> - pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
> + if (pxa3xx_nand_config_flash(info, &builtin_flash_types[0]))
> + return 0;
> chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
> - if (info->is_ready)
> + if (nand->is_ready)
> return 1;
> else
> return 0;
I think it is time to change this function return convention to propagate
errors and not just 0 or 1, (may be in separate patch) what do you think?
> @@ -882,7 +908,8 @@ static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
> static int pxa3xx_nand_scan(struct mtd_info *mtd)
> {
> struct pxa3xx_nand_info *info = mtd->priv;
> - struct platform_device *pdev = info->pdev;
> + struct pxa3xx_nand *nand = info->nand_data;
> + struct platform_device *pdev = nand->pdev;
> struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
> struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
> const struct pxa3xx_nand_flash *f = NULL;
> @@ -891,27 +918,25 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> uint64_t chipsize;
> int i, ret, num;
>
> + nand->chip_select = info->chip_select;
> if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
> goto KEEP_CONFIG;
>
> ret = pxa3xx_nand_sensing(info);
> if (!ret) {
> - kfree(mtd);
> - info->mtd = NULL;
> - printk(KERN_INFO "There is no nand chip on cs 0!\n");
> + free_cs_resource(info, nand->chip_select);
> + printk(KERN_INFO "There is no nand chip on cs %d!\n",
> + nand->chip_select);
>
> return -EINVAL;
> }
>
> chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
> - id = *((uint16_t *)(info->data_buff));
> + id = *((uint16_t *)(nand->data_buff));
> if (id != 0)
> printk(KERN_INFO "Detect a flash id %x\n", id);
> else {
> - kfree(mtd);
> - info->mtd = NULL;
> - printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
Is this warning no longer needed?
> -
> + free_cs_resource(info, nand->chip_select);
> return -EINVAL;
> }
>
> @@ -928,14 +953,16 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> }
>
> if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
> - kfree(mtd);
> - info->mtd = NULL;
> + free_cs_resource(info, nand->chip_select);
> printk(KERN_ERR "ERROR!! flash not defined!!!\n");
>
> return -EINVAL;
> }
>
> - pxa3xx_nand_config_flash(info, f);
> + if (pxa3xx_nand_config_flash(info, f)) {
> + printk(KERN_ERR "ERROR! Configure failed\n");
> + return -EINVAL;
> + }
Although, the pxa3xx_nand_config_flash() returns only 0 or -EINVAL,
it is better to propagate its return value.
> pxa3xx_flash_ids[0].name = f->name;
> pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
> pxa3xx_flash_ids[0].pagesize = f->page_size;
> @@ -950,13 +977,13 @@ KEEP_CONFIG:
> if (nand_scan_ident(mtd, 1, def))
> return -ENODEV;
> /* calculate addressing information */
> + nand->oob_buff = nand->data_buff + mtd->writesize;
> info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
> - info->oob_buff = info->data_buff + mtd->writesize;
> if ((mtd->size >> chip->page_shift) > 65536)
> info->row_addr_cycles = 3;
> else
> info->row_addr_cycles = 2;
> - mtd->name = mtd_names[0];
> + mtd->name = mtd_names[nand->chip_select];
> chip->ecc.mode = NAND_ECC_HW;
> chip->ecc.size = info->page_size;
>
> @@ -967,51 +994,33 @@ KEEP_CONFIG:
> return nand_scan_tail(mtd);
> }
>
> -static
> -struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
> +static int alloc_nand_resource(struct platform_device *pdev)
> {
> + struct pxa3xx_nand_platform_data *pdata;
> struct pxa3xx_nand_info *info;
> struct nand_chip *chip;
> struct mtd_info *mtd;
> + struct pxa3xx_nand *nand;
> struct resource *r;
> - int ret, irq;
> + int ret, irq, cs;
> + int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
>
> - mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
> - GFP_KERNEL);
> - if (!mtd) {
> + pdata = pdev->dev.platform_data;
> + nand = kzalloc(sizeof(struct mtd_info)
> + + sizeof(struct pxa3xx_nand_info), GFP_KERNEL);
> + if (!nand) {
> dev_err(&pdev->dev, "failed to allocate memory\n");
> - return NULL;
> + return -ENOMEM;
> }
>
> - info = (struct pxa3xx_nand_info *)(&mtd[1]);
> - chip = (struct nand_chip *)(&mtd[1]);
> - info->pdev = pdev;
> - info->mtd = mtd;
> - mtd->priv = info;
> - mtd->owner = THIS_MODULE;
> -
> - chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
> - chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
> - chip->controller = &info->controller;
> - chip->waitfunc = pxa3xx_nand_waitfunc;
> - chip->select_chip = pxa3xx_nand_select_chip;
> - chip->dev_ready = pxa3xx_nand_dev_ready;
> - chip->cmdfunc = pxa3xx_nand_cmdfunc;
> - chip->read_word = pxa3xx_nand_read_word;
> - chip->read_byte = pxa3xx_nand_read_byte;
> - chip->read_buf = pxa3xx_nand_read_buf;
> - chip->write_buf = pxa3xx_nand_write_buf;
> - chip->verify_buf = pxa3xx_nand_verify_buf;
> -
> - spin_lock_init(&chip->controller->lock);
> - init_waitqueue_head(&chip->controller->wq);
> - info->clk = clk_get(&pdev->dev, NULL);
> - if (IS_ERR(info->clk)) {
> + nand->pdev = pdev;
> + nand->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(nand->clk)) {
> dev_err(&pdev->dev, "failed to get nand clock\n");
> - ret = PTR_ERR(info->clk);
> - goto fail_free_mtd;
> + ret = PTR_ERR(nand->clk);
> + goto fail_alloc;
> }
> - clk_enable(info->clk);
> + clk_enable(nand->clk);
>
> r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> if (r == NULL) {
> @@ -1019,7 +1028,7 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
> ret = -ENXIO;
> goto fail_put_clk;
> }
> - info->drcmr_dat = r->start;
> + nand->drcmr_dat = r->start;
>
> r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
> if (r == NULL) {
> @@ -1027,7 +1036,7 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
> ret = -ENXIO;
> goto fail_put_clk;
> }
> - info->drcmr_cmd = r->start;
> + nand->drcmr_cmd = r->start;
>
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
> @@ -1050,81 +1059,147 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
> goto fail_put_clk;
> }
>
> - info->mmio_base = ioremap(r->start, resource_size(r));
> - if (info->mmio_base == NULL) {
> + nand->mmio_base = ioremap(r->start, resource_size(r));
> + if (nand->mmio_base == NULL) {
> dev_err(&pdev->dev, "ioremap() failed\n");
> ret = -ENODEV;
> goto fail_free_res;
> }
> - info->mmio_phys = r->start;
> -
> - ret = pxa3xx_nand_init_buff(info);
> - if (ret)
> - goto fail_free_io;
> + nand->mmio_phys = r->start;
>
> /* initialize all interrupts to be disabled */
> - disable_int(info, NDSR_MASK);
> + disable_int(nand, NDSR_MASK);
>
> ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
> - pdev->name, info);
> + pdev->name, nand);
> if (ret < 0) {
> dev_err(&pdev->dev, "failed to request IRQ\n");
> - goto fail_free_buf;
> + ret = -ENXIO;
> + goto fail_free_io;
> + }
> +
> + platform_set_drvdata(pdev, nand);
> +
> + spin_lock_init(&nand->controller.lock);
> + init_waitqueue_head(&nand->controller.wq);
> + for (cs = 0; cs < pdata->cs_num; cs++) {
> + mtd = kzalloc(sizeof(struct mtd_info)
> + + sizeof(struct pxa3xx_nand_info),
> + GFP_KERNEL);
> + if (!mtd) {
> + dev_err(&pdev->dev, "failed to allocate memory\n");
> + ret = -ENOMEM;
> + goto fail_free_irq;
> + }
> +
> + info = (struct pxa3xx_nand_info *)(&mtd[1]);
> + info->nand_data = nand;
> + info->chip_select = cs;
> + mtd->priv = info;
> + mtd->owner = THIS_MODULE;
> + nand->info[cs] = info;
> +
> + chip = (struct nand_chip *)(&mtd[1]);
> + chip->controller = &nand->controller;
> + chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
> + chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
> + chip->waitfunc = pxa3xx_nand_waitfunc;
> + chip->select_chip = pxa3xx_nand_select_chip;
> + chip->cmdfunc = pxa3xx_nand_cmdfunc;
> + chip->read_word = pxa3xx_nand_read_word;
> + chip->read_byte = pxa3xx_nand_read_byte;
> + chip->read_buf = pxa3xx_nand_read_buf;
> + chip->write_buf = pxa3xx_nand_write_buf;
> + chip->verify_buf = pxa3xx_nand_verify_buf;
> }
>
> - platform_set_drvdata(pdev, info);
> + if (use_dma == 0) {
> + nand->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
> + if (nand->data_buff == NULL) {
> + ret = -ENOMEM;
> + goto fail_free_buf;
> + }
> + goto success_exit;
> + }
>
> - return info;
> + nand->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
> + &nand->data_buff_phys, GFP_KERNEL);
> + if (nand->data_buff == NULL) {
> + dev_err(&pdev->dev, "failed to allocate dma buffer\n");
> + ret = -ENOMEM;
> + goto fail_free_buf;
> + }
>
> + nand->data_desc = (void *)nand->data_buff + data_desc_offset;
> + nand->data_desc_addr = nand->data_buff_phys + data_desc_offset;
> + nand->data_dma_ch = pxa_request_dma("nand-data", DMA_PRIO_LOW,
> + pxa3xx_nand_data_dma_irq, nand);
> + if (nand->data_dma_ch < 0) {
> + dev_err(&pdev->dev, "failed to request data dma\n");
> + ret = -ENXIO;
> + goto fail_free_dma_buf;
> + }
> +success_exit:
> + return 0;
> +
> +fail_free_dma_buf:
> + dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
> + nand->data_buff, nand->data_buff_phys);
> fail_free_buf:
> - free_irq(irq, info);
> - if (use_dma) {
> - pxa_free_dma(info->data_dma_ch);
> - dma_free_coherent(&pdev->dev, info->data_buff_size,
> - info->data_buff, info->data_buff_phys);
> - } else
> - kfree(info->data_buff);
> + for (cs = 0; cs < pdata->cs_num; cs++) {
> + info = nand->info[cs];
> + free_cs_resource(info, cs);
> + }
> +fail_free_irq:
> + free_irq(irq, nand);
> fail_free_io:
> - iounmap(info->mmio_base);
> + iounmap(nand->mmio_base);
> fail_free_res:
> release_mem_region(r->start, resource_size(r));
> fail_put_clk:
> - clk_disable(info->clk);
> - clk_put(info->clk);
> -fail_free_mtd:
> - kfree(mtd);
> - return NULL;
> + clk_disable(nand->clk);
> + clk_put(nand->clk);
> +fail_alloc:
> + kfree(nand);
> + return ret;
> }
>
> static int pxa3xx_nand_remove(struct platform_device *pdev)
> {
> - struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
> - struct mtd_info *mtd = info->mtd;
> + struct pxa3xx_nand *nand = platform_get_drvdata(pdev);
> + struct pxa3xx_nand_platform_data *pdata;
> + struct pxa3xx_nand_info *info;
> + struct mtd_info *mtd;
> struct resource *r;
> - int irq;
> + int irq, cs;
>
> platform_set_drvdata(pdev, NULL);
> + pdata = pdev->dev.platform_data;
>
> irq = platform_get_irq(pdev, 0);
> if (irq >= 0)
> - free_irq(irq, info);
> + free_irq(irq, nand);
> if (use_dma) {
> - pxa_free_dma(info->data_dma_ch);
> - dma_free_writecombine(&pdev->dev, info->data_buff_size,
> - info->data_buff, info->data_buff_phys);
> + pxa_free_dma(nand->data_dma_ch);
> + dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
> + nand->data_buff, nand->data_buff_phys);
> } else
> - kfree(info->data_buff);
> + kfree(nand->data_buff);
>
> - iounmap(info->mmio_base);
> + iounmap(nand->mmio_base);
> r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> release_mem_region(r->start, resource_size(r));
>
> - clk_disable(info->clk);
> - clk_put(info->clk);
> + clk_disable(nand->clk);
> + clk_put(nand->clk);
>
> - if (mtd) {
> + for (cs = 0; cs < pdata->cs_num; cs++) {
> + info = nand->info[cs];
> + if (!info)
> + continue;
> + mtd = get_mtd_by_info(info);
> mtd_device_unregister(mtd);
> - kfree(mtd);
> + free_cs_resource(info, cs);
> }
> return 0;
> }
> @@ -1134,34 +1209,54 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
> struct pxa3xx_nand_platform_data *pdata;
> struct pxa3xx_nand_info *info;
>
> + struct pxa3xx_nand *nand;
> + struct mtd_info *mtd;
> + int cs, ret, nr_parts, probe_success;
> +
> + probe_success = 0;
Can this be done along with declaration?
> pdata = pdev->dev.platform_data;
> if (!pdata) {
> dev_err(&pdev->dev, "no platform data defined\n");
> return -ENODEV;
> }
>
> - info = alloc_nand_resource(pdev);
> - if (info == NULL)
> + ret = alloc_nand_resource(pdev);
> + if (ret)
> return -ENOMEM;
Why not propagate the return value of alloc_nand_resource()?
>
> - if (pxa3xx_nand_scan(info->mtd)) {
> - dev_err(&pdev->dev, "failed to scan nand\n");
> - pxa3xx_nand_remove(pdev);
> - return -ENODEV;
> - }
> + nand = platform_get_drvdata(pdev);
> + for (cs = 0; cs < pdata->cs_num; cs++) {
> + info = nand->info[cs];
> + mtd = get_mtd_by_info(info);
> + if (pxa3xx_nand_scan(mtd)) {
> + dev_err(&pdev->dev, "failed to scan nand\n");
I think, it would be useful also to print here the return value of pxa3xx_nand_scan().
> + continue;
> + }
> +
> + ret = 0;
> + nr_parts = 0;
> + if (mtd_has_cmdlinepart()) {
> + const char *probes[] = { "cmdlinepart", NULL };
> + struct mtd_partition *parts;
>
> - if (mtd_has_cmdlinepart()) {
> - const char *probes[] = { "cmdlinepart", NULL };
> - struct mtd_partition *parts;
> - int nr_parts;
> + nr_parts = parse_mtd_partitions(mtd, probes, &parts, 0);
>
> - nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
> + if (nr_parts)
> + ret = mtd_device_register(mtd, parts, nr_parts);
> + }
>
> - if (nr_parts)
> - return mtd_device_register(info->mtd, parts, nr_parts);
> + if (!nr_parts)
> + ret = mtd_device_register(mtd, pdata->parts[cs],
> + pdata->nr_parts[cs]);
> + if (!ret)
> + probe_success = 1;
> }
>
> - return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
> + if (!probe_success) {
> + pxa3xx_nand_remove(pdev);
> + return -ENODEV;
> + } else
You don't need this else statement
> + return 0;
> }
>
> #ifdef CONFIG_PM
> @@ -1183,8 +1278,8 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
> struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
> struct mtd_info *mtd = info->mtd;
>
> - nand_writel(info, NDTR0CS0, info->ndtr0cs0);
> - nand_writel(info, NDTR1CS0, info->ndtr1cs0);
> + nand_writel(nand, NDTR0CS0, info->ndtr0cs0);
> + nand_writel(nand, NDTR1CS0, info->ndtr1cs0);
> clk_enable(info->clk);
>
> return 0;
I won't be able to test the patch in the near future, sorry...
--
Regards,
Igor.
More information about the linux-mtd
mailing list