[PATCH 2/2] mtd: drop ceiva map driver

Dmitry Eremin-Solenikov dbaryshkov at gmail.com
Thu Jun 2 07:54:08 EDT 2011


The same functionality is provided by physmap flash driver,
drivers/mtd/maps/ceiva.c didn't receive any functional changes since
the start of current git history, so drop it.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
---
 drivers/mtd/maps/Kconfig  |    8 -
 drivers/mtd/maps/Makefile |    1 -
 drivers/mtd/maps/ceiva.c  |  341 ---------------------------------------------
 3 files changed, 0 insertions(+), 350 deletions(-)
 delete mode 100644 drivers/mtd/maps/ceiva.c

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 1831063..46eca3b 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -406,14 +406,6 @@ config MTD_IMPA7
 	  This enables access to the NOR Flash on the impA7 board of
 	  implementa GmbH. If you have such a board, say 'Y' here.
 
-config MTD_CEIVA
-	tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
-	depends on MTD_JEDECPROBE && ARCH_CEIVA
-	help
-	  This enables access to the flash chips on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-	  If you have such a device, say 'Y'.
-
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
 	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index cb48b11..d6379fe 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
-obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
deleted file mode 100644
index 06f9c98..0000000
--- a/drivers/mtd/maps/ceiva.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott at mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico at fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- *  1. The flash size given should be the largest flash size that can
- *     be accommodated.
- *
- *  2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB                  (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB       (16)
-#define PARAMS_PARTITION_SIZE_KiB     (8)
-#define KERNEL_PARTITION_SIZE_KiB     (4*128)
-/* Use both remaining portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
-	{
-		.name = "Ceiva BOOT partition",
-		.size   = BOOT_PARTITION_SIZE_KiB*1024,
-		.offset = 0,
-
-	},{
-		.name = "Ceiva parameters partition",
-		.size   = PARAMS_PARTITION_SIZE_KiB*1024,
-		.offset = (16 + 8) * 1024,
-	},{
-		.name = "Ceiva kernel partition",
-		.size = (KERNEL_PARTITION_SIZE_KiB)*1024,
-		.offset = 0x20000,
-
-	},{
-		.name = "Ceiva root filesystem partition",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (ROOT_PARTITION_SIZE_KiB)*1024,
-	}
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
-	int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		*parts       = ceiva_partitions;
-		nb_parts     = ARRAY_SIZE(ceiva_partitions);
-	}
-#endif
-	return nb_parts;
-}
-#endif
-
-struct clps_info {
-	unsigned long base;
-	unsigned long size;
-	int width;
-	void *vbase;
-	struct map_info *map;
-	struct mtd_info *mtd;
-	struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
-	struct mtd_info *subdev[nr];
-	struct map_info *maps;
-	int i, found = 0, ret = 0;
-
-	/*
-	 * Allocate the map_info structs in one go.
-	 */
-	maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
-	if (!maps)
-		return -ENOMEM;
-	/*
-	 * Claim and then map the memory regions.
-	 */
-	for (i = 0; i < nr; i++) {
-		if (clps[i].base == (unsigned long)-1)
-			break;
-
-		clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
-		if (!clps[i].res) {
-			ret = -EBUSY;
-			break;
-		}
-
-		clps[i].map = maps + i;
-
-		clps[i].map->name = "clps flash";
-		clps[i].map->phys = clps[i].base;
-
-		clps[i].vbase = ioremap(clps[i].base, clps[i].size);
-		if (!clps[i].vbase) {
-			ret = -ENOMEM;
-			break;
-		}
-
-		clps[i].map->virt = (void __iomem *)clps[i].vbase;
-		clps[i].map->bankwidth = clps[i].width;
-		clps[i].map->size = clps[i].size;
-
-		simple_map_init(&clps[i].map);
-
-		clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
-		if (clps[i].mtd == NULL) {
-			ret = -ENXIO;
-			break;
-		}
-		clps[i].mtd->owner = THIS_MODULE;
-		subdev[i] = clps[i].mtd;
-
-		printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
-			"%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
-			clps[i].width * 8);
-		found += 1;
-	}
-
-	/*
-	 * ENXIO is special.  It means we didn't find a chip when
-	 * we probed.  We need to tear down the mapping, free the
-	 * resource and mark it as such.
-	 */
-	if (ret == -ENXIO) {
-		iounmap(clps[i].vbase);
-		clps[i].vbase = NULL;
-		release_resource(clps[i].res);
-		clps[i].res = NULL;
-	}
-
-	/*
-	 * If we found one device, don't bother with concat support.
-	 * If we found multiple devices, use concat if we have it
-	 * available, otherwise fail.
-	 */
-	if (ret == 0 || ret == -ENXIO) {
-		if (found == 1) {
-			*rmtd = subdev[0];
-			ret = 0;
-		} else if (found > 1) {
-			/*
-			 * We detected multiple devices.  Concatenate
-			 * them together.
-			 */
-			*rmtd = mtd_concat_create(subdev, found,
-						  "clps flash");
-			if (*rmtd == NULL)
-				ret = -ENXIO;
-		}
-	}
-
-	/*
-	 * If we failed, clean up.
-	 */
-	if (ret) {
-		do {
-			if (clps[i].mtd)
-				map_destroy(clps[i].mtd);
-			if (clps[i].vbase)
-				iounmap(clps[i].vbase);
-			if (clps[i].res)
-				release_resource(clps[i].res);
-		} while (i--);
-
-		kfree(maps);
-	}
-
-	return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
-	int i;
-
-	mtd_device_unregister(mtd);
-
-	if (mtd != clps[0].mtd)
-		mtd_concat_destroy(mtd);
-
-	for (i = NR_SUBMTD; i >= 0; i--) {
-		if (clps[i].mtd)
-			map_destroy(clps[i].mtd);
-		if (clps[i].vbase)
-			iounmap(clps[i].vbase);
-		if (clps[i].res)
-			release_resource(clps[i].res);
-	}
-	kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
-	int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		info[0].base = CS0_PHYS_BASE;
-		info[0].size = SZ_32M;
-		info[0].width = CEIVA_FLASH_WIDTH;
-		info[1].base = CS1_PHYS_BASE;
-		info[1].size = SZ_32M;
-		info[1].width = CEIVA_FLASH_WIDTH;
-		nr = 2;
-	}
-#endif
-	return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
-	const char *part_type = NULL;
-	int nr_parts = 0;
-	do {
-		/*
-		 * Partition selection stuff.
-		 */
-		nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
-		if (nr_parts > 0) {
-			part_type = "command line";
-			break;
-		}
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-		nr_parts = clps_static_partitions(&parsed_parts);
-		if (nr_parts > 0) {
-			part_type = "static";
-			break;
-		}
-		printk("found: %d partitions\n", nr_parts);
-#endif
-	} while (0);
-
-	if (nr_parts == 0) {
-		printk(KERN_NOTICE "clps flash: no partition info "
-			"available, registering whole flash\n");
-		mtd_device_register(mtd, NULL, 0);
-	} else {
-		printk(KERN_NOTICE "clps flash: using %s partition "
-			"definition\n", part_type);
-		mtd_device_register(mtd, parsed_parts, nr_parts);
-	}
-
-	/* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
-	kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
-	int ret;
-	int nr;
-
-	nr = clps_setup_flash();
-	if (nr < 0)
-		return nr;
-
-	ret = clps_setup_mtd(info, nr, &mymtd);
-	if (ret)
-		return ret;
-
-	clps_locate_partitions(mymtd);
-
-	return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
-	clps_destroy_mtd(info, mymtd);
-	clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
-- 
1.7.4.4




More information about the linux-mtd mailing list