[PATCH v2] mtd: dataflash: add device tree probe support

Shawn Guo shawn.guo at freescale.com
Fri Jul 15 00:49:20 EDT 2011


On Thu, Jul 14, 2011 at 08:54:07PM -0600, Grant Likely wrote:
> On Thu, Jul 14, 2011 at 11:52:37PM +0800, Shawn Guo wrote:
> > It adds device tree probe support for mtd_dataflash driver.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Grant Likely <grant.likely at secretlab.ca>
> > Cc: David Woodhouse <dwmw2 at infradead.org>
> > Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
> > ---
> > Changes since v1:
> >  * Add "atmel,at45xxx" into the match table
> >  * Add binding document
> > 
> >  .../devicetree/bindings/mtd/atmel-dataflash.txt    |   14 ++++++++++++++
> >  drivers/mtd/devices/mtd_dataflash.c                |   13 ++++++++++++-
> >  2 files changed, 26 insertions(+), 1 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
> > new file mode 100644
> > index 0000000..3783962
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
> > @@ -0,0 +1,14 @@
> > +* Atmel Data Flash
> > +
> > +Required properties:
> > +- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
> > +
> > +Example:
> > +
> > +flash at 1 {
> > +	#address-cells = <1>;
> > +	#size-cells = <1>;
> > +	compatible = "atmel,at45db321d", "atmel,at45xxx", "atmel,dataflash";
> > +	spi-max-frequency = <25000000>;
> > +	reg = <1>;
> > +};
> > diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> > index 8f6b02c..8e091b0 100644
> > --- a/drivers/mtd/devices/mtd_dataflash.c
> > +++ b/drivers/mtd/devices/mtd_dataflash.c
> > @@ -24,6 +24,8 @@
> >  #include <linux/mtd/mtd.h>
> >  #include <linux/mtd/partitions.h>
> >  
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> 
> This shouldn't be separate from the regular block of #include
> statements above it.

The patch does not show the context.  Here is the existing code.  I
just followed the pattern.

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/math64.h>

#include <linux/spi/spi.h>
#include <linux/spi/flash.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

But okay, I will add the OF headers right behind math64.h to not make
it any worse.

> >  
> >  /*
> >   * DataFlash is a kind of SPI flash.  Most AT45 chips have two buffers in
> > @@ -98,6 +100,12 @@ struct dataflash {
> >  	struct mtd_info		mtd;
> >  };
> >  
> > +static const struct of_device_id dataflash_dt_ids[] = {
> > +	{ .compatible = "atmel,at45xxx", },
> > +	{ .compatible = "atmel,dataflash", },
> > +	{ /* sentinel */ }
> > +};
> > +
> 
> This should be protected with a #ifdef CONFIG_OF/#else/#endif, and
> there should be a MODULE_DEVICE_TABLE().
> 
I personally hate #ifdef stuff.  But okay, I can do it since there
are people being concerned by this little waste of space.

Regards,
Shawn

> >  /* ......................................................................... */
> >  
> >  /*
> > @@ -634,6 +642,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
> >  {
> >  	struct dataflash		*priv;
> >  	struct mtd_info			*device;
> > +	struct mtd_part_parser_data	ppdata;
> >  	struct flash_platform_data	*pdata = spi->dev.platform_data;
> >  	char				*otp_tag = "";
> >  	int				err = 0;
> > @@ -675,7 +684,8 @@ add_dataflash_otp(struct spi_device *spi, char *name,
> >  			pagesize, otp_tag);
> >  	dev_set_drvdata(&spi->dev, priv);
> >  
> > -	err = mtd_device_parse_register(device, NULL, 0,
> > +	ppdata.of_node = spi->dev.of_node;
> > +	err = mtd_device_parse_register(device, NULL, &ppdata,
> >  			pdata ? pdata->parts : NULL,
> >  			pdata ? pdata->nr_parts : 0);
> >  
> > @@ -926,6 +936,7 @@ static struct spi_driver dataflash_driver = {
> >  		.name		= "mtd_dataflash",
> >  		.bus		= &spi_bus_type,
> >  		.owner		= THIS_MODULE,
> > +		.of_match_table = dataflash_dt_ids,
> >  	},
> >  
> >  	.probe		= dataflash_probe,
> > -- 
> > 1.7.4.1
> > 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
> 




More information about the linux-mtd mailing list