[PATCH 1/2] mtd/nand: fixup for fmr initialization of Freescale NAND controller

[Liu Shengzhou-B36685]

> -----Original Message-----
> From: Artem Bityutskiy [mailto:dedekind1 at gmail.com]
> Sent: Saturday, December 17, 2011 10:45 PM
> To: Liu Shengzhou-B36685
> Cc: linuxppc-dev at lists.ozlabs.org; Wood Scott-B07421;
> dwmw2 at infradead.org; Gala Kumar-B11780; linux-mtd at lists.infradead.org
> Subject: Re: [PATCH 1/2] mtd/nand: fixup for fmr initialization of
> Freescale NAND controller
> 
> On Mon, 2011-12-12 at 17:40 +0800, Shengzhou Liu wrote:
> > There was a bug for fmr initialization, which lead to  fmr was always
> > 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before
> > calling fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum
> > timeout value and not relying on the setting of bootloader.
> >
> > Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> 
> Pushed both to l2-mtd-2.6.git, thanks!
> 
> --
> Best Regards,
> Artem Bityutskiy

I noted it had been applied in linux-next.git tree.
Does it still need to l2-mtd-2.6.git? 
Thanks.

Best Regards,
Shengzhou Liu