[PATCH 4/4] mtd: gpmi-nand: move to dma_transfer_direction

[Shawn Guo]

This patch fixes usage of dma direction to adopt dma_transfer_direction.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c |   22 ++++++++++++----------
 1 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index de4db76..c4c4d6d 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -827,7 +827,7 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 	pio[1] = pio[2] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_NONE, 0);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 1 error\n");
 		return -1;
@@ -839,7 +839,7 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 	sg_init_one(sgl, this->cmd_buffer, this->command_length);
 	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel,
-					sgl, 1, DMA_TO_DEVICE, 1);
+					sgl, 1, DMA_MEM_TO_DEV, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -872,7 +872,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 	pio[1] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_NONE, 0);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 1 error\n");
 		return -1;
@@ -881,7 +881,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 	/* [2] send DMA request */
 	prepare_data_dma(this, DMA_TO_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_TO_DEVICE, 1);
+						1, DMA_MEM_TO_DEV, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -908,7 +908,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 	pio[1] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_NONE, 0);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 1 error\n");
 		return -1;
@@ -917,7 +917,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 	/* [2] : send DMA request */
 	prepare_data_dma(this, DMA_FROM_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_FROM_DEVICE, 1);
+						1, DMA_DEV_TO_MEM, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -964,7 +964,7 @@ int gpmi_send_page(struct gpmi_nand_data *this,
 
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_NONE, 0);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -998,7 +998,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_XFER_COUNT(0);
 	pio[1] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
-				(struct scatterlist *)pio, 2, DMA_NONE, 0);
+				(struct scatterlist *)pio, 2,
+				DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 1 error\n");
 		return -1;
@@ -1027,7 +1028,7 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 	pio[5] = auxiliary;
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_NONE, 1);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -1045,7 +1046,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
 	pio[1] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
-				(struct scatterlist *)pio, 2, DMA_NONE, 1);
+				(struct scatterlist *)pio, 2,
+				DMA_TRANS_NONE, 1);
 	if (!desc) {
 		pr_err("step 3 error\n");
 		return -1;
-- 
1.7.4.1