[PATCH 1/2] mtd/nand : set Nand flash page address to FBAR and FPAR correctly

[Artem Bityutskiy]

On Fri, 2011-12-09 at 17:42 +0800, shuo.liu at freescale.com wrote:
> From: Liu Shuo <b35362 at freescale.com>
> 
> If we use the Nand flash chip whose number of pages in a block is greater
> than 64(for large page), we must treat the low bit of FBAR as being the
> high bit of the page address due to the limitation of FCM, it simply uses
> the low 6-bits (for large page) of the combined block/page address as the
> FPAR component, rather than considering the actual block size.

Pushed this one to l2-mtd-2.6.git, thanks!

Artem.