[PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO
Janusz Krzysztofik
jkrzyszt at tis.icnet.pl
Sun Dec 11 15:11:58 EST 2011
The Amstrad Delta board has two extra output ports used for driving
input lines of different on-board devices. Those ports are now
controlled with custom functions, provided by the board arch code and
used by several device drivers.
The idea behind the series is to replace those custom I/O functions
with gpiolib API. This way, existing drivers can be made less platform
dependent, and some of them perhaps even superseded with generic GPIO
based drivers after the board platform device descriptions are
converted. Moreover, should a new driver for the on-board Smart Card
controller ever be created, it could be designed as a generic GPIO
based driver, not a custom one.
Janusz Krzysztofik (10):
GPIO: gpio-generic: Move initialization up to postcore
ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
LED: drop leds-ams-delta driver
MTD: NAND: ams-delta: use GPIO instead of custom I/O
ARM: OMAP1: ams-delta: Use GPIO API in modem setup
ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
omapfb: lcd_ams_delta: Drive control lines over GPIO
input: serio: ams-delta: toggle keyboard power over GPIO
ARM: OMAP1: ams-delta: drop custom I/O functions
arch/arm/mach-omap1/Kconfig | 2 +
arch/arm/mach-omap1/board-ams-delta.c | 220 +++++++++++++++++----
arch/arm/plat-omap/include/plat/board-ams-delta.h | 50 ++---
drivers/gpio/gpio-generic.c | 2 +-
drivers/input/serio/ams_delta_serio.c | 45 +++--
drivers/leds/Kconfig | 7 -
drivers/leds/Makefile | 1 -
drivers/leds/leds-ams-delta.c | 137 -------------
drivers/mtd/nand/ams-delta.c | 74 +++++--
drivers/video/omap/lcd_ams_delta.c | 27 ++-
sound/soc/omap/ams-delta.c | 21 ++-
11 files changed, 309 insertions(+), 277 deletions(-)
delete mode 100644 drivers/leds/leds-ams-delta.c
--
1.7.3.4
More information about the linux-mtd
mailing list