[Help] SST39VF6401B Support
Flávio Silveira
fggs at terra.com.br
Fri Dec 9 18:15:21 EST 2011
Hi,
Please ignore my last e-mail, I've fixed cfi_probe and flashchip is now
detected.
The problem now is this error: gen_probe: Not Supported Vendor Command Set
found
I did backport the fixup tables and everything in cfi_cmdset_0002, what
should I been looking for to fix this?
Thanks!
----- Original Message -----
From: "Flávio Silveira" <fggs at terra.com.br>
To: <linux-mtd at lists.infradead.org>
Sent: Thursday, December 08, 2011 7:21 PM
Subject: Re: [Help] SST39VF6401B Support
> Hi,
>
> I've backported every single patch for this chip, I don't know what else
> I
> can do, where to look at.
>
> The error I'm getting is: pflash: cfi_probe failed
>
> Attached is the map file which I found this message error.
>
> Here's some parts of the code, perhaps I need to modify something on this
> file...
>
> static struct mtd_info *bcm947xx_mtd;
>
> ......................................
>
> struct map_info bcm947xx_map = {
> name: "Physically mapped flash",
> size: WINDOW_SIZE,
> bankwidth: BUSWIDTH,
> phys: WINDOW_ADDR,
> };
>
> ....................
>
> if ((bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map)) == NULL) {
> printk(KERN_ERR "pflash: cfi_probe failed\n");
> ret = -ENXIO;
> goto fail;
> }
>
> I would really appreciate any help, I mean really!
>
> Thanks in advance!
>
> ----- Original Message -----
> From: "Flávio Silveira" <fggs at terra.com.br>
> To: "yidong zhang" <zhangyd6 at gmail.com>
> Cc: <linux-mtd at lists.infradead.org>
> Sent: Monday, June 20, 2011 9:55 PM
> Subject: Re: [Help] SST39VF6401B Support
>
>
> Hi,
>
> Thanks for your help, I'll see if I can compile it with more debug and
> see
> what I'm doing wrong.
>
> Biggest problem is this kernel that is old and I can't update, but let's
> hope I can make it work!
>
>
> ----- Original Message -----
> From: "yidong zhang" <zhangyd6 at gmail.com>
> To: "Flávio Silveira" <fggs at terra.com.br>
> Cc: <linux-mtd at lists.infradead.org>
> Sent: Monday, June 20, 2011 12:36 AM
> Subject: Re: [Help] SST39VF6401B Support
>
>
> Hi
> Please see the datasheet for the erase command. Some uses 0x50
> rather than 0x30, and the erase size are different. I think you may
> need porting the code listed bellow to your driver. It has been a
> long time since i used this flash, so i don't remember it very well.
> Using the log may help you a lot.
>
> static void fixup_sst39vf_rev_b(struct mtd_info *mtd)
> 286 {
> 287 struct map_info *map = mtd->priv;
> 288 struct cfi_private *cfi = map->fldrv_priv;
> 289
> 290 fixup_old_sst_eraseregion(mtd);
> 291
> 292 cfi->addr_unlock1 = 0x555;
> 293 cfi->addr_unlock2 = 0x2AA;
> 294
> 295 cfi->sector_erase_cmd = CMD(0x50);
> 296 }
> 297
> 298 static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd)
> 299 {
> 300 struct map_info *map = mtd->priv;
> 301 struct cfi_private *cfi = map->fldrv_priv;
> 302
> 303 fixup_sst39vf_rev_b(mtd);
> 304
> 305 /*
> 306 * CFI reports 1024 sectors (0x03ff+1) of 64KBytes
> (0x0100*256) where
> 307 * it should report a size of 8KBytes (0x0020*256).
> 308 */
> 309 cfi->cfiq->EraseRegionInfo[0] = 0x002003ff;
> 310 pr_warning("%s: Bad 38VF640x CFI data; adjusting sector
> size from 64 to 8KiB\n", mtd->name);
> 311 }
> 312
>
>
> 2011/6/20 Flávio Silveira <fggs at terra.com.br>:
>> Hi,
>>
>> I'm attaching some other files to see if it helps finding what's wrong.
>>
>> Thanks in advance!
>>
>> ----- Original Message ----- From: "Flávio Silveira" <fggs at terra.com.br>
>> To: "Fabio Giovagnini" <fabio.giovagnini at aurion-tech.com>;
>> <linux-mtd at lists.infradead.org>
>> Cc: "yidong zhang" <zhangyd6 at gmail.com>; <David.Woodhouse at intel.com>;
>> "Wolfram Sang" <w.sang at pengutronix.de>; <yegorslists at googlemail.com>;
>> "Guillaume LECERF" <glecerf at gmail.com>; <taliaferro62 at gmail.com>
>> Sent: Wednesday, June 15, 2011 9:55 PM
>> Subject: Re: [Help] SST39VF6401B Support
>>
>>
>> Hi guys,
>>
>> I've tested this patch on kernel 2.6.23 (actually it's called 2.6.24.111)
>> and didn't work.
>>
>> Below are my diffs and I can post original files as well, please help me
>> make it work!
>>
>> Thanks in advance!
>>
>> cfi_util.c
>>
>> 29a30,107
>>>
>>> int __xipram cfi_qry_present(struct map_info *map, __u32 base,
>>> struct cfi_private *cfi)
>>> {
>>> int osf = cfi->interleave * cfi->device_type; /* scale factor */
>>> map_word val[3];
>>> map_word qry[3];
>>>
>>> qry[0] = cfi_build_cmd('Q', map, cfi);
>>> qry[1] = cfi_build_cmd('R', map, cfi);
>>> qry[2] = cfi_build_cmd('Y', map, cfi);
>>>
>>> val[0] = map_read(map, base + osf*0x10);
>>> val[1] = map_read(map, base + osf*0x11);
>>> val[2] = map_read(map, base + osf*0x12);
>>>
>>> if (!map_word_equal(map, qry[0], val[0]))
>>> return 0;
>>>
>>> if (!map_word_equal(map, qry[1], val[1]))
>>> return 0;
>>>
>>> if (!map_word_equal(map, qry[2], val[2]))
>>> return 0;
>>>
>>> return 1; /* "QRY" found */
>>> }
>>> EXPORT_SYMBOL_GPL(cfi_qry_present);
>>>
>>> int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
>>> struct cfi_private *cfi)
>>> {
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
>>> if (cfi_qry_present(map, base, cfi))
>>> return 1;
>>> /* QRY not found probably we deal with some odd CFI chips */
>>> /* Some revisions of some old Intel chips? */
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
>>> if (cfi_qry_present(map, base, cfi))
>>> return 1;
>>> /* ST M29DW chips */
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
>>> if (cfi_qry_present(map, base, cfi))
>>> return 1;
>>> /* some old SST chips, e.g. 39VF160x/39VF320x */
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
>>> if (cfi_qry_present(map, base, cfi))
>>> return 1;
>>> /* SST 39VF640xB */
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
>>> if (cfi_qry_present(map, base, cfi))
>>> return 1;
>>> /* QRY not found */
>>> return 0;
>>> }
>>> EXPORT_SYMBOL_GPL(cfi_qry_mode_on);
>>>
>>> void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
>>> struct cfi_private *cfi)
>>> {
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
>>> /* M29W128G flashes require an additional reset command
>>> when exit qry mode */
>>> if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
>>> cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
>>> }
>>> EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
>>>
>>
>> cfi_cmdset_0002.c
>>
>> 219a220,253
>>>
>>> static void fixup_old_sst_eraseregion(struct mtd_info *mtd)
>>> {
>>> struct map_info *map = mtd->priv;
>>> struct cfi_private *cfi = map->fldrv_priv;
>>>
>>> /*
>>> * These flashes report two seperate eraseblock regions based on the
>>> * sector_erase-size and block_erase-size, although they both operate on
>>> the
>>> * same memory. This is not allowed according to CFI, so we just pick
>>> the
>>> * sector_erase-size.
>>> */
>>> cfi->cfiq->NumEraseRegions = 1;
>>> }
>>>
>>> static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param)
>>> {
>>> struct map_info *map = mtd->priv;
>>> struct cfi_private *cfi = map->fldrv_priv;
>>>
>>> fixup_old_sst_eraseregion(mtd);
>>>
>>> cfi->addr_unlock1 = 0x555;
>>> cfi->addr_unlock2 = 0x2AA;
>>> }
>>>
>>> /* Used to fix CFI-Tables of chips without Extended Query Tables */
>>> static struct cfi_fixup cfi_nopri_fixup_table[] = {
>>> { CFI_MFR_SST, 0x235C, fixup_sst39vf_rev_b, NULL, }, // SST39VF3202B
>>> { CFI_MFR_SST, 0x235D, fixup_sst39vf_rev_b, NULL, }, // SST39VF3201B
>>> { CFI_MFR_SST, 0x236C, fixup_sst39vf_rev_b, NULL, }, // SST39VF6402B
>>> { CFI_MFR_SST, 0x236D, fixup_sst39vf_rev_b, NULL, }, // SST39VF6401B
>>> { 0, 0, NULL, NULL }
>>> };
>>>
>>
>>
>> ----- Original Message ----- From: "Fabio Giovagnini"
>> <fabio.giovagnini at aurion-tech.com>
>> To: <linux-mtd at lists.infradead.org>
>> Cc: "yidong zhang" <zhangyd6 at gmail.com>; <David.Woodhouse at intel.com>;
>> "Wolfram Sang" <w.sang at pengutronix.de>; <yegorslists at googlemail.com>;
>> "Guillaume LECERF" <glecerf at gmail.com>; <taliaferro62 at gmail.com>
>> Sent: Friday, October 22, 2010 2:50 PM
>> Subject: Re: [Help] SST39VF6401B Support
>>
>>
>> Hi Guys,
>> As Gullelm remeber for sure, I used the jedec probe for such a flash in a
>> very
>> old 2.6 kernel.
>>
>> Now I'm migrating to the newets one kernel.
>> Do you tell me how the kernel will be updated with the last mtd stuff
>> developed; or in place of it how to patch a standard kernel?
>>
>> Thanks a lot and sorry for my question if it is improper
>>
>>
>> In data venerdì 22 ottobre 2010 17:42:39, yidong zhang ha scritto:
>> : > On Fri, Oct 22, 2010 at 11:36 PM, Guillaume LECERF
>> <glecerf at gmail.com>
>> wrote:
>>>
>>> > 2010/10/22 yidong zhang <zhangyd6 at gmail.com>:
>>> >>> Could you try setting cif->cfiq->EraseRegionInfo[0] to 0x02003FF in
>>> >>> fixup_sst39vf_rev_b() ?
>>> >>
>>> >> Hi
>>> >> how about this attached patch.
>>> >
>>> > If it works for you, I'll send a patch series for SST 39VF640xB and
>>> > 38VF640x, because both chips needs 0x50 as erase command.
>>>
>>> Sorry, i cannot test it right now. I will sent the result as soon as i
>>> can.
>>>
>>> > --
>>> > Guillaume LECERF
>>> > GeeXboX developer - www.geexbox.org
>>>
>>> ______________________________________________________
>>> Linux MTD discussion mailing list
>>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>>
>> --
>> Ing. Fabio Giovagnini
>>
>> Aurion s.r.l.
>> P.I e C.F.
>> 00885711200
>> skype: aurion.giovagnini
>> Tel. +39.051.594.78.24
>> Cell. +39.335.83.50.919
>> www.aurion-tech.com
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>>
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
--------------------------------------------------------------------------------
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
More information about the linux-mtd
mailing list