[PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

[Scott Wood]

On 12/03/2011 10:31 PM, shuo.liu at freescale.com wrote:
> From: Liu Shuo <shuo.liu at freescale.com>
> 
> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
> to support the Nand flash chip whose page size is larger than 2K bytes,
> we read/write 2k data repeatedly by issuing FIR_OP_RB/FIR_OP_WB and save
> them to a large buffer.
> 
> Signed-off-by: Liu Shuo <shuo.liu at freescale.com>
> ---
> v3:
>     -remove page_size of struct fsl_elbc_mtd.
>     -do a oob write by NAND_CMD_RNDIN. 
> 
>  drivers/mtd/nand/fsl_elbc_nand.c |  243 ++++++++++++++++++++++++++++++++++----
>  1 files changed, 218 insertions(+), 25 deletions(-)

What is the plan for bad block marker migration?

> @@ -473,13 +568,72 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
>  		 * write so the HW generates the ECC.
>  		 */
>  		if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
> -		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
> -			out_be32(&lbc->fbcr,
> -				elbc_fcm_ctrl->index - elbc_fcm_ctrl->column);
> -		else
> +		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
> +			if (elbc_fcm_ctrl->oob && mtd->writesize > 2048) {
> +				out_be32(&lbc->fbcr, 64);
> +			} else {
> +				out_be32(&lbc->fbcr, elbc_fcm_ctrl->index
> +						- elbc_fcm_ctrl->column);
> +			}

We need to limit ourselves to the regions that have actually been
written to in the buffer.  fbcr needs to be set separately for first and
last subpages, with intermediate subpages having 0, 64, or 2112 as
appropriate.  Subpages that are entirely before column or entirely after
column + index should be skipped.

> +		} else {
> +			out_be32(&lbc->fir, FIR_OP_WB << FIR_OP1_SHIFT);
> +			for (i = 1; i < n; i++) {
> +				if (i == n - 1) {
> +					elbc_fcm_ctrl->use_mdr = 1;
> +					out_be32(&lbc->fir,
> +						(FIR_OP_WB  << FIR_OP1_SHIFT) |
> +						(FIR_OP_CM3 << FIR_OP2_SHIFT) |
> +						(FIR_OP_CW1 << FIR_OP3_SHIFT) |
> +						(FIR_OP_RS  << FIR_OP4_SHIFT));

Please explicitly show the (FIR_OP_NOP << FIR_OP0_SHIFT) compenent.

> +	} else if (mtd->writesize >= 2048 && mtd->writesize <= 16 * 1024) {
> +
>  		setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);

Don't insert a blank line here.

-Scott