[PATCH 2/3] nandtest: print number of bits corrected during test

[Artem Bityutskiy]

On Tue, 2011-08-09 at 16:57 -0400, Ben Gardiner wrote:
> The nandtest program monitors the corrected ecc stat to determine if an
> ECC correction has taken place during the last write-read. If so, it
> prints "ECC corrected".
> 
> The mtd subsytem will store the number of bits corrected in the corrected
> ecc stat so update the nandtest output to print also the number of bits
> corrected when performing the test.
> 
> Signed-off-by: Ben Gardiner <bengardiner at nanometrics.ca>

Pushed this patch to mtd-utils, thanks!

-- 
Best Regards,
Artem Bityutskiy