[PATCH v3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

Matthieu CASTET matthieu.castet at parrot.com
Fri Aug 19 04:57:21 EDT 2011


LiuShuo a écrit :
> 于 2011年08月19日 01:00, Matthieu CASTET 写道:
>> b35362 at freescale.com a écrit :
>>> From: Liu Shuo<b35362 at freescale.com>
>>>
>>> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
>>> to support the Nand flash chip whose page size is larger than 2K bytes,
>>> we divide a page into multi-2K pages for MTD layer driver. In that case,
>>> we force to set the page size to 2K bytes. We convert the page address of
>>> MTD layer driver to a real page address in flash chips and a column index
>>> in fsl_elbc driver. We can issue any column address by UA instruction of
>>> elbc controller.
>>>
>> Why do you need to do that ?
>>
>> When mtd send you a 4k page, why can't you write it by 2*2k pages write ?
> 1. It's easy to implement.
> 2. We don't need to move the data in buffer more times, because we
> want to use the HW_ECC.
> 
> In flash chip per Page:
> ----------------------------------------------------------------
> | first data | first oob | second data | second oob |
> ----------------------------------------------------------------
How the bad block marker are handled with this remapping ?

Mtd will search in the first oob, but this will be the data zone of the nand,
not where manufacturer put marker.

Matthieu



More information about the linux-mtd mailing list