GPMI-NAND Status?

Ivan Djelic ivan.djelic at parrot.com
Mon Aug 15 12:57:34 EDT 2011


On Mon, Aug 15, 2011 at 05:22:13PM +0100, Artem Bityutskiy wrote:
> On Sun, 2011-08-14 at 10:11 +0200, Ivan Djelic wrote:
> > On Fri, Aug 05, 2011 at 02:51:33PM +0100, Wolfram Sang wrote:
> > (...)
> > > 
> > > problem overwriting all-0xff data in NAND [2]
> > > =============================================
> > > 
> > > Although it occured only when writing JFFS2 images so far, this is a generic
> > > issue and needs to be fixed, right?
> > > 
> > > 
> > (...)
> > > [2] http://lists.infradead.org/pipermail/linux-mtd/2011-July/037104.html
> > 
> > As explained in the thread linked above, this issue should be fixed in your
> > flashing tool, _not_ in your driver. The nand device you are using does not
> > support programming pages multiple times in a row; pretending it does in the
> > special all-0xff case is inefficient (you need to detect all-0xff data) and
> > unnecessary (just do not program blank pages !).
> 
> Hmm, isn't it also buggy because if my precious data contains 2KiB of
> 0xFFs (aligned to 2KiB boundary) then I will have no ECC protection for
> this page? Or I miss something?

Ouch, yes you are correct, very good point which I missed :)

Ivan



More information about the linux-mtd mailing list