[PATCH] mtd-utils: fix corrupt cleanmarker with flash_erase -j command

b35362 at freescale.com b35362 at freescale.com
Wed Aug 3 01:50:38 EDT 2011


From: Liu Shuo <b35362 at freescale.com>

Flash_erase -j should fill discrete freeoob areas with required bytes
of JFFS2 cleanmarker in jffs2_check_nand_cleanmarker(). Not just fill
the first freeoob area.

Signed-off-by: Liu Shuo <b35362 at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
---
 flash_erase.c |   41 +++++++++++++++++++++++++++++++++++------
 1 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/flash_erase.c b/flash_erase.c
index fe2eaca..e6747fc 100644
--- a/flash_erase.c
+++ b/flash_erase.c
@@ -98,6 +98,7 @@ int main(int argc, char *argv[])
 	int isNAND;
 	int error = 0;
 	uint64_t offset = 0;
+	void *oob_data = NULL;
 
 	/*
 	 * Process user arguments
@@ -197,15 +198,40 @@ int main(int argc, char *argv[])
 			if (ioctl(fd, MEMGETOOBSEL, &oobinfo) != 0)
 				return sys_errmsg("%s: unable to get NAND oobinfo", mtd_device);
 
+			cleanmarker.totlen = cpu_to_je32(8);
 			/* Check for autoplacement */
 			if (oobinfo.useecc == MTD_NANDECC_AUTOPLACE) {
+				struct nand_ecclayout_user ecclayout;
 				/* Get the position of the free bytes */
-				if (!oobinfo.oobfree[0][1])
+				if (ioctl(fd, ECCGETLAYOUT, &ecclayout) != 0)
+					return sys_errmsg("%s: unable to get NAND ecclayout", mtd_device);
+
+				if (!ecclayout.oobavail)
 					return errmsg(" Eeep. Autoplacement selected and no empty space in oob");
 				clmpos = oobinfo.oobfree[0][0];
-				clmlen = oobinfo.oobfree[0][1];
-				if (clmlen > 8)
-					clmlen = 8;
+				clmlen = MIN(ecclayout.oobavail, 8);
+
+				if (oobinfo.oobfree[0][1] < 8 && ecclayout.oobavail >= 8) {
+					int i, left, n, last = 0;
+					void *cm;
+
+					oob_data = malloc(mtd.oob_size);
+					if (!oob_data)
+						return -ENOMEM;
+
+					memset(oob_data, 0xff, mtd.oob_size);
+					cm = &cleanmarker;
+					for (i = 0, left = clmlen; left ; i++) {
+						n = MIN(left, oobinfo.oobfree[i][1]);
+						memcpy(oob_data + oobinfo.oobfree[i][0],
+								cm, n);
+						left -= n;
+						cm   += n;
+						last = oobinfo.oobfree[i][0] + n;
+					}
+
+					clmlen = last - clmpos;
+				}
 			} else {
 				/* Legacy mode */
 				switch (mtd.oob_size) {
@@ -223,7 +249,6 @@ int main(int argc, char *argv[])
 						break;
 				}
 			}
-			cleanmarker.totlen = cpu_to_je32(8);
 		}
 		cleanmarker.hdr_crc = cpu_to_je32(mtd_crc32(0, &cleanmarker, sizeof(cleanmarker) - 4));
 	}
@@ -272,7 +297,8 @@ int main(int argc, char *argv[])
 
 		/* write cleanmarker */
 		if (isNAND) {
-			if (mtd_write_oob(mtd_desc, &mtd, fd, offset + clmpos, clmlen, &cleanmarker) != 0) {
+			void *data = oob_data ? oob_data + clmpos : &cleanmarker;
+			if (mtd_write_oob(mtd_desc, &mtd, fd, offset + clmpos, clmlen, data) != 0) {
 				sys_errmsg("%s: MTD writeoob failure", mtd_device);
 				continue;
 			}
@@ -291,5 +317,8 @@ int main(int argc, char *argv[])
 	show_progress(&mtd, offset, eb, eb_start, eb_cnt);
 	bareverbose(!quiet, "\n");
 
+	if (oob_data)
+		free(oob_data);
+
 	return 0;
 }
-- 
1.7.1





More information about the linux-mtd mailing list