[PATCH 1/3 v3] P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
Roy Zang
tie-fei.zang at freescale.com
Thu Sep 16 02:41:22 EDT 2010
From: Lan Chunhe-B25806 <b25806 at freescale.com>
Move Freescale elbc interrupt from nand dirver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.
Signed-off-by: Lan Chunhe-B25806 <b25806 at freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
Comparing with v2:
1. according to the feedback, add some decorations.
2. change of_platform_driver to platform_driver
3. rebase to 2.6.36-rc4
arch/powerpc/Kconfig | 7 +-
arch/powerpc/include/asm/fsl_lbc.h | 31 +++++-
arch/powerpc/sysdev/fsl_lbc.c | 246 ++++++++++++++++++++++++++++++------
3 files changed, 242 insertions(+), 42 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 631e5a0..44df1ba 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -687,9 +687,12 @@ config 4xx_SOC
bool
config FSL_LBC
- bool
+ bool "Freescale Local Bus support"
+ depends on FSL_SOC
help
- Freescale Localbus support
+ Enables reporting of errors from the Freescale local bus
+ controller. Also contains some common code used by
+ drivers for specific local bus peripherals.
config FSL_GTM
bool
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 1b5a210..db94698 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -1,9 +1,10 @@
/* Freescale Local Bus Controller
*
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright (c) 2006-2007, 2010 Freescale Semiconductor
*
* Authors: Nick Spence <nick.spence at freescale.com>,
* Scott Wood <scottwood at freescale.com>
+ * Jack Lan <jack.lan at freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -125,13 +126,23 @@ struct fsl_lbc_regs {
#define LTESR_ATMW 0x00800000
#define LTESR_ATMR 0x00400000
#define LTESR_CS 0x00080000
+#define LTESR_UPM 0x00000002
#define LTESR_CC 0x00000001
#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+#define LTESR_MASK (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \
+ | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \
+ | LTESR_CC)
+#define LTESR_CLEAR 0xFFFFFFFF
+#define LTECCR_CLEAR 0xFFFFFFFF
+#define LTESR_STATUS LTESR_MASK
+#define LTEIR_ENABLE LTESR_MASK
+#define LTEDR_ENABLE 0x00000000
__be32 ltedr; /**< Transfer Error Disable Register */
__be32 lteir; /**< Transfer Error Interrupt Register */
__be32 lteatr; /**< Transfer Error Attributes Register */
__be32 ltear; /**< Transfer Error Address Register */
- u8 res6[0xC];
+ __be32 lteccr; /**< Transfer Error ECC Register */
+ u8 res6[0x8];
__be32 lbcr; /**< Configuration Register */
#define LBCR_LDIS 0x80000000
#define LBCR_LDIS_SHIFT 31
@@ -265,7 +276,23 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
cpu_relax();
}
+/* overview of the fsl lbc controller */
+
+struct fsl_lbc_ctrl {
+ /* device info */
+ struct device *dev;
+ struct fsl_lbc_regs __iomem *regs;
+ int irq;
+ wait_queue_head_t irq_wait;
+ spinlock_t lock;
+ void *nand;
+
+ /* status read from LTESR by irq handler */
+ unsigned int irq_status;
+};
+
extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
u32 mar);
+extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index dceb8d1..edd6d95 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -2,8 +2,11 @@
* Freescale LBC and UPM routines.
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
+ * Copyright (c) 2010 Freescale Semiconductor
*
* Author: Anton Vorontsov <avorontsov at ru.mvista.com>
+ * Author: Jack Lan <Jack.Lan at freescale.com>
+ * Author: Roy Zang <tie-fei.zang at freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,37 +24,14 @@
#include <linux/of.h>
#include <asm/prom.h>
#include <asm/fsl_lbc.h>
+#include <linux/slab.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-
-static char __initdata *compat_lbc[] = {
- "fsl,pq2-localbus",
- "fsl,pq2pro-localbus",
- "fsl,pq3-localbus",
- "fsl,elbc",
-};
-
-static int __init fsl_lbc_init(void)
-{
- struct device_node *lbus;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
- lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
- if (lbus)
- goto found;
- }
- return -ENODEV;
-
-found:
- fsl_lbc_regs = of_iomap(lbus, 0);
- of_node_put(lbus);
- if (!fsl_lbc_regs)
- return -ENOMEM;
- return 0;
-}
-arch_initcall(fsl_lbc_init);
+struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
+EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
/**
* fsl_lbc_find - find Localbus bank
@@ -65,13 +45,15 @@ arch_initcall(fsl_lbc_init);
int fsl_lbc_find(phys_addr_t addr_base)
{
int i;
+ struct fsl_lbc_regs __iomem *lbc;
- if (!fsl_lbc_regs)
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
- for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
- __be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
- __be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+ lbc = fsl_lbc_ctrl_dev->regs;
+ for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) {
+ __be32 br = in_be32(&lbc->bank[i].br);
+ __be32 or = in_be32(&lbc->bank[i].or);
if (br & BR_V && (br & or & BR_BA) == addr_base)
return i;
@@ -94,22 +76,27 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
{
int bank;
__be32 br;
+ struct fsl_lbc_regs __iomem *lbc;
bank = fsl_lbc_find(addr_base);
if (bank < 0)
return bank;
- br = in_be32(&fsl_lbc_regs->bank[bank].br);
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+
+ lbc = fsl_lbc_ctrl_dev->regs;
+ br = in_be32(&lbc->bank[bank].br);
switch (br & BR_MSEL) {
case BR_MS_UPMA:
- upm->mxmr = &fsl_lbc_regs->mamr;
+ upm->mxmr = &lbc->mamr;
break;
case BR_MS_UPMB:
- upm->mxmr = &fsl_lbc_regs->mbmr;
+ upm->mxmr = &lbc->mbmr;
break;
case BR_MS_UPMC:
- upm->mxmr = &fsl_lbc_regs->mcmr;
+ upm->mxmr = &lbc->mcmr;
break;
default:
return -EINVAL;
@@ -143,14 +130,18 @@ EXPORT_SYMBOL(fsl_upm_find);
* thus UPM pattern actually executed. Note that mar usage depends on the
* pre-programmed AMX bits in the UPM RAM.
*/
+
int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
{
int ret = 0;
unsigned long flags;
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+
spin_lock_irqsave(&fsl_lbc_lock, flags);
- out_be32(&fsl_lbc_regs->mar, mar);
+ out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar);
switch (upm->width) {
case 8:
@@ -172,3 +163,182 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
return ret;
}
EXPORT_SYMBOL(fsl_upm_run_pattern);
+
+static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl)
+{
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ /* clear event registers */
+ setbits32(&lbc->ltesr, LTESR_CLEAR);
+ out_be32(&lbc->lteatr, 0);
+ out_be32(&lbc->ltear, 0);
+ out_be32(&lbc->lteccr, LTECCR_CLEAR);
+ out_be32(&lbc->ltedr, LTEDR_ENABLE);
+
+ /* Enable interrupts for any detected events */
+ out_be32(&lbc->lteir, LTEIR_ENABLE);
+
+ return 0;
+}
+
+static int __devexit fsl_lbc_ctrl_remove(struct platform_device *dev)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+
+ if (ctrl->irq)
+ free_irq(ctrl->irq, ctrl);
+
+ if (ctrl->regs)
+ iounmap(ctrl->regs);
+
+ dev_set_drvdata(&dev->dev, NULL);
+
+ kfree(ctrl);
+
+ return 0;
+}
+
+/*
+ * NOTE: This interrupt is used to report localbus events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+
+static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
+{
+ struct fsl_lbc_ctrl *ctrl = data;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ u32 status;
+
+ status = in_be32(&lbc->ltesr);
+ if (!status)
+ return IRQ_NONE;
+
+ out_be32(&lbc->ltesr, LTESR_CLEAR);
+ out_be32(&lbc->lteatr, 0);
+ out_be32(&lbc->ltear, 0);
+ ctrl->irq_status = status;
+
+ if (status & LTESR_BM)
+ dev_err(ctrl->dev, "Local bus monitor time-out: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_WP)
+ dev_err(ctrl->dev, "Write protect error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_ATMW)
+ dev_err(ctrl->dev, "Atomic write error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_ATMR)
+ dev_err(ctrl->dev, "Atomic read error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_CS)
+ dev_err(ctrl->dev, "Chip select error: "
+ "LTESR 0x%08X\n", status);
+ if (status & LTESR_UPM)
+ ;
+ if (status & LTESR_FCT) {
+ dev_err(ctrl->dev, "FCM command time-out: "
+ "LTESR 0x%08X\n", status);
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & LTESR_PAR) {
+ dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: "
+ "LTESR 0x%08X\n", status);
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & LTESR_CC) {
+ smp_wmb();
+ wake_up(&ctrl->irq_wait);
+ }
+ if (status & ~LTESR_MASK)
+ dev_err(ctrl->dev, "Unknown error: "
+ "LTESR 0x%08X\n", status);
+ return IRQ_HANDLED;
+}
+
+/*
+ * fsl_lbc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only. The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+
+static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
+{
+ int ret;
+
+ if (!dev->dev.of_node) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -EFAULT;
+ }
+ fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL);
+ if (!fsl_lbc_ctrl_dev)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev);
+
+ spin_lock_init(&fsl_lbc_ctrl_dev->lock);
+ init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait);
+
+ fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+ if (!fsl_lbc_ctrl_dev->regs) {
+ dev_err(&dev->dev, "failed to get memory region\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_lbc_ctrl_dev->dev = &dev->dev;
+
+ ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev);
+ if (ret < 0)
+ goto err;
+
+ ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+ "fsl-lbc", fsl_lbc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_lbc_ctrl_dev->irq);
+ ret = fsl_lbc_ctrl_dev->irq;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ iounmap(fsl_lbc_ctrl_dev->regs);
+ kfree(fsl_lbc_ctrl_dev);
+ return ret;
+}
+
+static const struct platform_device_id fsl_lbc_match[] = {
+ { "fsl,elbc", },
+ { "fsl,pq3-localbus", },
+ { "fsl,pq2-localbus", },
+ { "fsl,pq2pro-localbus", },
+ {},
+};
+
+static struct platform_driver fsl_lbc_ctrl_driver = {
+ .driver = {
+ .name = "fsl-lbc",
+ },
+ .probe = fsl_lbc_ctrl_probe,
+ .id_table = fsl_lbc_match,
+};
+
+static int __init fsl_lbc_init(void)
+{
+ return platform_driver_register(&fsl_lbc_ctrl_driver);
+}
+module_init(fsl_lbc_init);
--
1.5.6.5
More information about the linux-mtd
mailing list