[PATCH 2/2] mtd: fix almost all checkpatch warnings in nand_base.c
Florian Fainelli
florian at openwrt.org
Tue Sep 7 07:23:45 EDT 2010
Only 3 warnings are left, one is off by one character, but splitting the line
would reduce the readability. One is for a for loop statement, which would also
not improve readability. The last one is a false positive on a test.
Signed-off-by: Florian Fainelli <ffainelli at freebox.fr>
---
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 50c0d5f..922b890 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -45,7 +45,7 @@
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/leds.h>
-#include <asm/io.h>
+#include <linux/io.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
@@ -786,7 +786,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
spinlock_t *lock = &chip->controller->lock;
wait_queue_head_t *wq = &chip->controller->wq;
DECLARE_WAITQUEUE(wait, current);
- retry:
+retry:
spin_lock(lock);
/* Hardware controller shared among independent devices */
@@ -982,6 +982,7 @@ out:
return ret;
}
+EXPORT_SYMBOL(nand_unlock);
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
@@ -1051,6 +1052,7 @@ out:
return ret;
}
+EXPORT_SYMBOL(nand_lock);
/**
* nand_read_page_raw - [Intern] read raw page data without ecc
@@ -1078,8 +1080,9 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
*
* We need a special oob layout and handling even when OOB isn't used.
*/
-static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1160,7 +1163,8 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* @readlen: data length
* @bufpoi: buffer to store read data
*/
-static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
{
int start_step, end_step, num_steps;
uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1168,6 +1172,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ int index = 0;
/* Column address wihin the page aligned to ECC size (256bytes). */
start_step = data_offs / chip->ecc.size;
@@ -1206,25 +1211,29 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
} else {
/* send the command to read the particular ecc bytes */
/* take care about buswidth alignment in read_buf */
- aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+ index = start_step * chip->ecc.bytes;
+
+ aligned_pos = eccpos[index] & ~(busw - 1);
aligned_len = eccfrag_len;
- if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index] & (busw - 1))
aligned_len++;
- if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
aligned_len++;
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + aligned_pos, -1);
chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
}
for (i = 0; i < eccfrag_len; i++)
- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+ chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
p = bufpoi + data_col_addr;
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
int stat;
- stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+ stat = chip->ecc.correct(mtd, p,
+ &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
if (stat < 0)
mtd->ecc_stats.failed++;
else
@@ -1486,7 +1495,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
- ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
+ ret = chip->ecc.read_subpage(mtd, chip,
+ col, bytes, bufpoi);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
@@ -1878,7 +1888,7 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
else
ret = nand_do_read_ops(mtd, from, ops);
- out:
+out:
nand_release_device(mtd);
return ret;
}
@@ -1907,8 +1917,9 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
-static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2448,7 +2459,7 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
else
ret = nand_do_write_ops(mtd, to, ops);
- out:
+out:
nand_release_device(mtd);
return ret;
}
@@ -2634,7 +2645,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
}
instr->state = MTD_ERASE_DONE;
- erase_exit:
+erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
@@ -2892,7 +2903,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw, int *maf_id, int *dev_id,
+ int busw,
+ int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
int i, maf_idx;
@@ -3087,8 +3099,10 @@ ident_done:
ffs(mtd->erasesize) - 1;
if (chip->chipsize & 0xffffffff)
chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
- else
- chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
+ else {
+ chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+ chip->chip_shift += 32 - 1;
+ }
/* Set the bad block position */
if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16))
@@ -3169,7 +3183,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
nand_set_defaults(chip, busw);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, &nand_dev_id, table);
+ type = nand_get_flash_type(mtd, chip, busw,
+ &nand_maf_id, &nand_dev_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -3199,6 +3214,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return 0;
}
+EXPORT_SYMBOL(nand_scan_ident);
/**
@@ -3427,10 +3443,11 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Build bad block table */
return chip->scan_bbt(mtd);
}
+EXPORT_SYMBOL(nand_scan_tail);
/* is_module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular. */
#ifdef MODULE
#define caller_is_module() (1)
#else
@@ -3466,6 +3483,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
ret = nand_scan_tail(mtd);
return ret;
}
+EXPORT_SYMBOL(nand_scan);
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
@@ -3492,12 +3510,6 @@ void nand_release(struct mtd_info *mtd)
& NAND_BBT_DYNAMICSTRUCT)
kfree(chip->badblock_pattern);
}
-
-EXPORT_SYMBOL_GPL(nand_lock);
-EXPORT_SYMBOL_GPL(nand_unlock);
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
EXPORT_SYMBOL_GPL(nand_release);
static int __init nand_base_init(void)
@@ -3515,5 +3527,6 @@ module_init(nand_base_init);
module_exit(nand_base_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill at realitydiluted.com>, Thomas Gleixner <tglx at linutronix.de>");
+MODULE_AUTHOR("Steven J. Hill <sjhill at realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx at linutronix.de>");
MODULE_DESCRIPTION("Generic NAND flash driver code");
More information about the linux-mtd
mailing list