[PATCH] mtd: mxc_nand: do not depend on disabling the irq in the interrupt handler

[Uwe Kleine-König]

On Wed, Sep 29, 2010 at 09:28:43AM +0200, Sascha Hauer wrote:
> David,
> 
> On Thu, Sep 23, 2010 at 02:16:52PM +0300, Artem Bityutskiy wrote:
> > On Tue, 2010-09-21 at 09:40 +0200, Sascha Hauer wrote:
> > > This patch reverts the driver to enabling/disabling the NFC interrupt
> > > mask rather than enabling/disabling the system interrupt. This cleans
> > > up the driver so that it doesn't rely on interrupts being disabled
> > > within the interrupt handler.
> > > For i.MX21 we keep the current behaviour, that is calling
> > > enable_irq/disable_irq_nosync to enable/disable interrupts.
> > > This patch is based on earlier work by John Ogness.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > Acked-by: John Ogness <john.ogness at linutronix.de>
> > > Tested-by: John Ogness <john.ogness at linutronix.de>
> > 
> > I've created l2-mtd-2.6.git/for-2.6.36 branch, pushed your patch there,
> > pinged dwmw2 for you. I do not give you any guarantees this will reach
> > 2.6.36, you have to ping dwmw2.
> 
> Any chance to get this in? The mxc-nand driver is nonfunctional at the
> moment and 2.6.36 is getting closer.

Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>

(for the patch and the request to get it in before 2.6.36.)

Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |