[PATCH V2 34/69] ST SPEAr: Replacing SIZE macro's with actual required size
Viresh KUMAR
viresh.kumar at st.com
Fri Oct 1 07:55:54 EDT 2010
From: Shiraz Hashim <shiraz.hashim at st.com>
In arch specific files SIZE macro's were defined which were used for
creating memory/io mappings for sepecific devices. These macro's are
coming straight from h/w user manual and are much greated than required
sizes. Replacing these macros by actual required size.
Signed-off-by: Shiraz Hashim <shiraz.hashim at st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar at st.com>
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
arch/arm/mach-spear3xx/spear300.c | 9 +++------
arch/arm/mach-spear3xx/spear310.c | 2 +-
arch/arm/mach-spear3xx/spear320.c | 2 +-
arch/arm/mach-spear3xx/spear3xx.c | 8 ++++----
arch/arm/mach-spear6xx/spear6xx.c | 10 +++++-----
5 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index c299e52..03e050b 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -604,8 +604,7 @@ struct spear_shirq shirq_ras1 = {
void sdhci_i2s_mem_enable(u8 mask)
{
u32 val;
- void __iomem *base = ioremap(SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ void __iomem *base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (!base) {
pr_debug("sdhci_i2s_enb: ioremap fail\n");
return;
@@ -628,8 +627,7 @@ void __init spear300_init(void)
spear3xx_init();
/* shared irq registeration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
@@ -637,8 +635,7 @@ void __init spear300_init(void)
}
/* pmx initialization */
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 1c84303..189e3d4 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -362,7 +362,7 @@ void __init spear310_init(void)
spear3xx_init();
/* shared irq registeration */
- base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index c228286..3f1c88b 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -694,7 +694,7 @@ void __init spear320_init(void)
spear3xx_init();
/* shared irq registeration */
- base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 34d8286..f7b8915 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -254,22 +254,22 @@ struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SPEAR3XX_ICM1_UART_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SPEAR3XX_ML1_VIC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SPEAR3XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e64fc57..f91380e 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -408,27 +408,27 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SPEAR6XX_ICM1_UART0_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SPEAR6XX_CPU_VIC_PRI_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SPEAR6XX_CPU_VIC_SEC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_BASE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
--
1.7.2.2
More information about the linux-mtd
mailing list