[PATCH V2] omap: nand: remove hardware ECC as default

[Tony Lindgren]

* Sukumar Ghorai <s-ghorai at ti.com> [101119 06:36]:
> CONFIG_MTD_NAND_OMAP_HWECC defined wrongly in patch submitted for 2.6.36.
> This flag enables hw ecc by default. Boards like beagle and pandora uses
> sw ecc for write (e.g. binary flushed from u-boot) and read from kernel.
> https://patchwork.kernel.org/patch/111036/
> 
> Signed-off-by: Sukumar Ghorai <s-ghorai at ti.com>

This should go in as a fix for the -rc via MTD list if possible.

Acked-by: Tony Lindgren <tony at atomide.com>

> ---
>  drivers/mtd/nand/omap2.c |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index cd41c58..15682ec 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -7,7 +7,6 @@
>   * it under the terms of the GNU General Public License version 2 as
>   * published by the Free Software Foundation.
>   */
> -#define CONFIG_MTD_NAND_OMAP_HWECC
>  
>  #include <linux/platform_device.h>
>  #include <linux/dma-mapping.h>
> -- 
> 1.7.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html