[PATCH 0/3] omap3 nand: cleanup exiting platform related code

[Sukumar Ghorai]

   The following set of patches applies on top of master branch.
	http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git
   Patches verified on: omap3430-SDP, omap3630-sdp, zoom3 and beagle board

   And these are the patches required to address the following input -
     1. The NAND driver needs to stop tinkering with the GPMC registers
	The omap General Purpose Memory Controller (GPMC) registers are omap
        specific, and not driver specific. Tinkering with these registers can
        cause issues with the other devices on the GPMC.

     2. Passing hardcoded GPMC_CS0_BASE needs to go from the board files
	Passing hardcoded GPMC virtual addressess is sure way to mess up things.
        This should all become unnecessary once the NAND drivers stops messing
        with the GPMC registers directly.

Sukumar Ghorai (3):
	omap3: GPMC register definition at common location
	omap3 nand: cleanup for not to use GPMC virtual address
	omap3 nand: fix issue in board file to detect the nand

 arch/arm/mach-omap2/board-cm-t35.c         |   20 +----
 arch/arm/mach-omap2/board-devkit8000.c     |   25 +------
 arch/arm/mach-omap2/board-omap3beagle.c    |   24 +-----
 arch/arm/mach-omap2/board-omap3touchbook.c |   25 +------
 arch/arm/mach-omap2/board-overo.c          |   24 +-----
 arch/arm/mach-omap2/gpmc.c                 |   67 +++++-----------
 arch/arm/plat-omap/include/plat/gpmc.h     |   41 ++++++++-
 arch/arm/plat-omap/include/plat/nand.h     |    6 +-
 drivers/mtd/nand/omap2.c                   |  125 ++++++++++------------------
 9 files changed, 109 insertions(+), 248 deletions(-)