[PATCHv2 0/2] mtd: nand: Extend MLC support

Artem Bityutskiy dedekind1 at gmail.com
Wed May 5 08:19:20 EDT 2010


On Tue, 2010-05-04 at 20:58 -0700, Kevin Cernekee wrote:
> Part 1/2 is an improved version of my previous submission.  Additional
> checks were added to ensure that certain "5-byte" Micron and Samsung
> parts are not falsely detected as having 6-byte IDs.  I also rolled in
> the 256B NAND_MAX_OOBSIZE change.
> 
> Part 2/2 is a resubmission/rebase of Reuben Dowle's 2009/02/03 patch:
> 
> http://lists.infradead.org/pipermail/linux-mtd/2009-February/024473.html
> 
> I am trying to compile a table of NAND IDs to make sure the detection
> algorithm correctly handles all known cases.  If you could send me the
> following information for any NAND chips you have access to (via
> private email), it would be appreciated:
> 
> 1) Part number
> 
> 2) ID code (please read 8 bytes so I can see where it wraps around)
> 
> 3) Device size, block size, page size, OOB bytes per page, bus width,
> and bad block marker location
> 
> 4) Datasheet, if available

Removed older patches and taken these ones to l2-mtd-2.6 / dunno.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)




More information about the linux-mtd mailing list