[PATCH] mtd: OneNAND: OMAP3: unmap correct DMA buffer

[Mika Westerberg]

Function omap3_onenand_write_bufferram() maps the write buffer and stores the
returned handle in dma_src. However, when it does the DMA unmap, it uses wrong
DMA handle (dma_dst).

This patch fixes it to use the correct DMA handle.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg at nokia.com>
---
 drivers/mtd/onenand/omap2.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 75f38b9..2d81a3a 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -402,7 +402,7 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
 
 	dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
 	dma_dst = c->phys_base + bram_offset;
-	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+	if (dma_mapping_error(&c->pdev->dev, dma_src)) {
 		dev_err(&c->pdev->dev,
 			"Couldn't DMA map a %d byte buffer\n",
 			count);
@@ -425,7 +425,7 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
 		if (*done)
 			break;
 
-	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+	dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
 
 	if (!*done) {
 		dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
-- 
1.5.6.5