[Uclinux-dist-devel] [PATCH 1/2] mtd: m25p80: Reworkprobing/JEDEC code

[Anton Vorontsov]

On Mon, Jun 21, 2010 at 12:34:05PM -0400, Mike Frysinger wrote:
> On Mon, Jun 21, 2010 at 07:20, Anton Vorontsov wrote:
> > You can't easily change OF. It's like "let's change ACPI tables
> > or BIOS in these PCs". Doable, but involves things like reflashing.
> > And we usually have to support old BIOSes as well.
> >
> > OTOH, I see (git grep m25p arch/powerpc/boot/dts/) that in
> > mainline kernel only MPC8569 board has a correct m25p
> > node, and it is STMicro variant (it is JEDEC capable).
> >
> > As we don't really have to support out of tree code, I'd
> > just go with this patch, assuming that we have to change
> > device tree for boards with non-JEDEC flashes. It's
> > effectively the same thing as platform data flag, except
> > that it works automatically for OF platforms.
> >
> > diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> > index 81e49a9..a610ca9 100644
> > --- a/drivers/mtd/devices/m25p80.c
> > +++ b/drivers/mtd/devices/m25p80.c
> > @@ -680,6 +680,16 @@ static const struct spi_device_id m25p_ids[] = {
> >        { "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
> >        { "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
> >
> > +       { "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
> > +       { "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
> > +       { "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
> > +       { "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
> > +       { "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
> > +       { "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
> > +       { "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
> > +       { "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
> > +       { "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
> > +
> 
> are you picking the m25p because its flash geometry matches whatever
> you're using, or because you have some weird variant of the m25p that
> has JEDEC commands removed ?

The latter. It's Numonyx M25Pxx flashes, see
http://www.numonyx.com/Documents/Datasheets/M25P80.pdf

   The RDID instruction is available only for parts made with 110
   nm Technology identified with Process letter '4'.

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2