[PATCH] mxc-nand: don't disable clock in mxcnd-suspend
Sascha Hauer
s.hauer at pengutronix.de
Mon Jan 11 13:00:38 EST 2010
On Mon, Jan 11, 2010 at 05:53:16PM +0100, Uwe Kleine-König wrote:
> The clock must already be off after mtd->suspend. Disabling it again
> results in an negative overflow of the clock usage count. This didn't
> hurt as mxcnd_resume undid it after wake up.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> Cc: David Woodhouse <dwmw2 at infradead.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
> Cc: Vladimir Barinov <vova.barinov at gmail.com>
Acked-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
> drivers/mtd/nand/mxc_nand.c | 10 ++++++----
> 1 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> index 84f3635..970ce6b 100644
> --- a/drivers/mtd/nand/mxc_nand.c
> +++ b/drivers/mtd/nand/mxc_nand.c
> @@ -888,8 +888,12 @@ static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
> DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
>
> ret = mtd->suspend(mtd);
> - /* Disable the NFC clock */
> - clk_disable(host->clk);
> +
> + /*
> + * nand_suspend locks the device for exclusive access, so
> + * the clock must already be off.
> + */
> + BUG_ON(!ret && host->clk_act);
>
> return ret;
> }
> @@ -903,8 +907,6 @@ static int mxcnd_resume(struct platform_device *pdev)
>
> DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
>
> - /* Enable the NFC clock */
> - clk_enable(host->clk);
> mtd->resume(mtd);
>
> return ret;
> --
> 1.6.5.2
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-mtd
mailing list