MLC nand driver for linux

[Ricard Wanderlof]

On Tue, 23 Feb 2010, Paulraj, Sandeep wrote:

> I've used MICRON and SAMSUNG MLC NAND's without any problems.
>
> The MICRON NAND's were ONFI devices and even they worked well.

What do you do about ECC for these devices? As I understand MLC flash 
requires stronger ECC algorithms than the 1 bit / 256 byte algorithm which 
is by default implemented in software by mtd. Do the flash chips or the 
system you are using have hardware ECC?

/Ricard
-- 
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30