Issue : jffs2 and ecc layout
Ming Lei
tom.leiming at gmail.com
Thu Dec 23 03:24:35 EST 2010
Hi,
2010/9/28 Ghorai, Sukumar <s-ghorai at ti.com>:
> Hi,
> I was using the following ecc layout which is not working to mount the jffs2 File-system. I was in 2.6.32 kernel and working; but same layout is not working with latest 2.6 kernel.
>
> Observation is that - no read request issued to the driver (say omap2.c).
>
> # mount -t jffs2 /dev/mtdblock4 /mnt/nand
> [ 32.505218] cannot read OOB for EB at 00000000, requested 8 bytes, read 0 bytes, error -22
> mount: Mounting /dev/mtdblock4 on /mnt/nand failed: Input/output error
I meet the issue too, kernel is 2.6.37-rc6-next-20101217+, and board is
beagle B5.
Is there any way to fix or workaround the issue?
thanks,
--
Lei Ming
More information about the linux-mtd
mailing list