[PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc

Ghorai, Sukumar s-ghorai at ti.com
Wed Dec 22 03:00:43 EST 2010



> -----Original Message-----
> From: Tony Lindgren [mailto:tony at atomide.com]
> Sent: Saturday, December 18, 2010 5:40 AM
> To: Ghorai, Sukumar
> Cc: linux-omap at vger.kernel.org; linux-mtd at lists.infradead.org; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc
> 
> * Sukumar Ghorai <s-ghorai at ti.com> [101126 07:25]:
> > add support the irq mode in GPMC.
> > gpmc_init() function move after omap_init_irq() as it has dependecy on
> irq.
> >
> > Signed-off-by: Sukumar Ghorai <s-ghorai at ti.com>
> > ---
> >  arch/arm/mach-omap2/board-2430sdp.c        |    1 +
> >  arch/arm/mach-omap2/board-3430sdp.c        |    1 +
> >  arch/arm/mach-omap2/board-3630sdp.c        |    1 +
> >  arch/arm/mach-omap2/board-4430sdp.c        |    2 +
> >  arch/arm/mach-omap2/board-am3517evm.c      |    2 +
> >  arch/arm/mach-omap2/board-apollon.c        |    1 +
> >  arch/arm/mach-omap2/board-cm-t35.c         |    1 +
> >  arch/arm/mach-omap2/board-devkit8000.c     |    1 +
> >  arch/arm/mach-omap2/board-generic.c        |    2 +
> >  arch/arm/mach-omap2/board-h4.c             |    1 +
> >  arch/arm/mach-omap2/board-igep0020.c       |    1 +
> >  arch/arm/mach-omap2/board-ldp.c            |    1 +
> >  arch/arm/mach-omap2/board-n8x0.c           |    2 +
> >  arch/arm/mach-omap2/board-omap3beagle.c    |    1 +
> >  arch/arm/mach-omap2/board-omap3evm.c       |    2 +
> >  arch/arm/mach-omap2/board-omap3pandora.c   |    2 +
> >  arch/arm/mach-omap2/board-omap3stalker.c   |    1 +
> >  arch/arm/mach-omap2/board-omap3touchbook.c |    1 +
> >  arch/arm/mach-omap2/board-omap4panda.c     |    2 +
> >  arch/arm/mach-omap2/board-overo.c          |    1 +
> >  arch/arm/mach-omap2/board-rx51.c           |    1 +
> >  arch/arm/mach-omap2/board-zoom2.c          |    2 +
> >  arch/arm/mach-omap2/board-zoom3.c          |    2 +
> >  arch/arm/mach-omap2/gpmc.c                 |   39
> ++++++++++++++++++++++++++-
> >  arch/arm/mach-omap2/io.c                   |    2 -
> >  arch/arm/plat-omap/include/plat/gpmc.h     |    4 +++
> >  arch/arm/plat-omap/include/plat/irqs.h     |    9 +++++-
> >  27 files changed, 81 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-
> omap2/board-2430sdp.c
> > index b527f8d..11c89dc 100644
> > --- a/arch/arm/mach-omap2/board-2430sdp.c
> > +++ b/arch/arm/mach-omap2/board-2430sdp.c
> > @@ -145,6 +145,7 @@ static void __init omap_2430sdp_init_irq(void)
> >  	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
> >  	omap2_init_common_hw(NULL, NULL);
> >  	omap_init_irq();
> > +	gpmc_init();
> >  	omap_gpio_init();
> >  }
> >
> > diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-
> omap2/board-3430sdp.c
> > index 4e3742c..a040165 100644
> > --- a/arch/arm/mach-omap2/board-3430sdp.c
> > +++ b/arch/arm/mach-omap2/board-3430sdp.c
> > @@ -328,6 +328,7 @@ static void __init omap_3430sdp_init_irq(void)
> >  	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
> >  	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
> >  	omap_init_irq();
> > +	gpmc_init();
> >  	omap_gpio_init();
> >  }
> ...
> 
> The gpmc init should be done with subsys_initcall instead.

[Ghorai] You suggested the same in previous v5; and I mentioned 
the issues [1] that - nand_init()called before subsys_initcall(gpmc_init);
Let me know if I am missing anything again.
 
[1] https://patchwork.kernel.org/patch/212452/




More information about the linux-mtd mailing list