[PATCH] mtd: onenand: bugfix for 2x mode bad block handling
Kyungmin Park
kmpark at infradead.org
Thu Dec 2 18:24:09 EST 2010
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
On Thu, Dec 2, 2010 at 10:28 PM, Roman Tereshonkov
<roman.tereshonkov at nokia.com> wrote:
> This bug becomes visible in 2x mode when chip->writesize
> is different from mtd->writesize (= 2 * chip->writesize).
> At this case the bad block information is read from
> the first and the third physical pages instead of
> the first and the second as specification states.
>
> Signed-off-by: Roman Tereshonkov <roman.tereshonkov at nokia.com>
> ---
> drivers/mtd/onenand/onenand_bbt.c | 6 ++++--
> 1 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
> index 01ab5b3..905209b 100644
> --- a/drivers/mtd/onenand/onenand_bbt.c
> +++ b/drivers/mtd/onenand/onenand_bbt.c
> @@ -91,13 +91,15 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
> for (j = 0; j < len; j++) {
> /* No need to read pages fully,
> * just read required OOB bytes */
> - ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
> + ret = onenand_bbt_read_oob(mtd,
> + from + j * this->writesize + bd->offs, &ops);
>
> /* If it is a initial bad block, just ignore it */
> if (ret == ONENAND_BBT_READ_FATAL_ERROR)
> return -EIO;
>
> - if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
> + if (ret || check_short_pattern(&buf[j * scanlen],
> + scanlen, this->writesize, bd)) {
> bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
> printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
> i >> 1, (unsigned int) from);
> --
> 1.7.0.4
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
More information about the linux-mtd
mailing list