[PATCH 3/3][MTD] P4080/nand: Fix the freescale lbc issue with 36bit mode

[Roy Zang]

From: Lan Chunhe-B25806 <b25806 at freescale.com>

When system uses 36bit physical address, res.start is 36bit
physical address. But the function of in_be32 returns 32bit
physical address. Then both of them compared each other is
wrong. So by converting the address of res.start into
the right format fixes this issue.

Signed-off-by: Lan Chunhe-B25806 <b25806 at freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
 arch/powerpc/include/asm/fsl_lbc.h |    1 +
 arch/powerpc/sysdev/fsl_lbc.c      |   33 ++++++++++++++++++++++++++++++++-
 drivers/mtd/nand/fsl_elbc_nand.c   |    2 +-
 3 files changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 9b95eab..28dcf63 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -249,6 +249,7 @@ struct fsl_upm {
 	int width;
 };
 
+extern unsigned int convert_lbc_address(phys_addr_t addr_base);
 extern int fsl_lbc_find(phys_addr_t addr_base);
 extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
 
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 9c9e44f..08f98d8 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -31,6 +31,36 @@ struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
 EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
 
 /**
+ * convert_lbc_address - convert the base address
+ * @addr_base:	base address of the memory bank
+ *
+ * This function converts a base address of lbc into the right format for the BR
+ * registers. If the SOC has eLBC then it returns 32bit physical address else
+ * it returns 34bit physical address for local bus(Example: MPC8641).
+ */
+unsigned int convert_lbc_address(phys_addr_t addr_base)
+{
+	void *dev;
+	int compatible;
+
+	dev = of_find_node_by_name(NULL, "localbus");
+	if (!dev) {
+		printk(KERN_INFO "fsl-lbc: can't find localbus node\n");
+		of_node_put(dev);
+		return 0;
+	}
+
+	compatible = of_device_is_compatible(dev, "fsl,elbc");
+	of_node_put(dev);
+	if (compatible)
+		return addr_base & 0xffff8000;
+	else
+		return (addr_base & 0x0ffff8000ull) \
+			| ((addr_base & 0x300000000ull) >> 19);
+}
+EXPORT_SYMBOL(convert_lbc_address);
+
+/**
  * fsl_lbc_find - find Localbus bank
  * @addr_base:	base address of the memory bank
  *
@@ -50,7 +80,8 @@ int fsl_lbc_find(phys_addr_t addr_base)
 		__be32 br = in_be32(&fsl_lbc_ctrl_dev->regs->bank[i].br);
 		__be32 or = in_be32(&fsl_lbc_ctrl_dev->regs->bank[i].or);
 
-		if (br & BR_V && (br & or & BR_BA) == addr_base)
+		if (br & BR_V && (br & or & BR_BA) \
+				== convert_lbc_address(addr_base))
 			return i;
 	}
 
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7bbcb3f..0e8dc40 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -838,7 +838,7 @@ static int __devinit fsl_elbc_nand_probe(struct of_device *dev,
 		    (in_be32(&lbc->bank[bank].br) & BR_MSEL) == BR_MS_FCM &&
 		    (in_be32(&lbc->bank[bank].br) &
 		     in_be32(&lbc->bank[bank].or) & BR_BA)
-		     == res.start)
+		     == convert_lbc_address(res.start))
 			break;
 
 	if (bank >= MAX_BANKS) {
-- 
1.5.6.5