[PATCH 4/9] Removing dead CONFIG_RPX(LITE|CLASSIC)
Christian Dietrich
qy03fugy at stud.informatik.uni-erlangen.de
Wed Aug 4 08:41:51 EDT 2010
CONFIG_RPX(LITE|CLASSIC) doesn't exist in Kconfig, therefore removing
all references to it from the source. Because RPX(LITE|CLASSIC) can't
be defined, MTD_RPXLITE can't be defined either. Therfore removing it to.
They were be introduced in 14cf11af6cf608eb8c23e989ddb17a715ddce109 and
removed in df34403dcaacef541a67c955aebc37c51f53ca7c.
Signed-off-by: Christian Dietrich <qy03fugy at stud.informatik.uni-erlangen.de>
---
arch/m68k/include/asm/commproc.h | 17 --------
drivers/mtd/maps/Kconfig | 10 -----
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/rpxlite.c | 64 ------------------------------
drivers/pcmcia/m8xx_pcmcia.c | 81 --------------------------------------
5 files changed, 0 insertions(+), 173 deletions(-)
delete mode 100644 drivers/mtd/maps/rpxlite.c
diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
index b4f1d54..48f5466 100644
--- a/arch/m68k/include/asm/commproc.h
+++ b/arch/m68k/include/asm/commproc.h
@@ -480,23 +480,6 @@ typedef struct scc_enet {
#define SICR_ENET_CLKRT ((uint)0x0000003d)
#endif
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003d00)
-#endif
-
/* SCC Event register as used by Ethernet.
*/
#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f..10261fc 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -286,16 +286,6 @@ config MTD_TQM8XXL
code to communicate with the chips on the TQM8xxL board. More at
<http://www.denx.de/embedded-ppc-en.html>.
-config MTD_RPXLITE
- tristate "CFI Flash device mapped on RPX Lite or CLLF"
- depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
- help
- The RPXLite PowerPC board has CFI-compliant chips mapped in
- a strange sparse mapping. This 'mapping' driver supports that
- arrangement, allowing the CFI probe and command set driver code
- to communicate with the chips on the RPXLite board. More at
- <http://www.embeddedplanet.com/>.
-
config MTD_MBX860
tristate "System flash on MBX860 board"
depends on MTD_CFI && MBX
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index bb035cd..7821c71 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PISMO) += pismo.o
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
-obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
deleted file mode 100644
index 3e3ef53..0000000
--- a/drivers/mtd/maps/rpxlite.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Handle mapping of the flash on the RPX Lite and CLLF boards
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-
-#define WINDOW_ADDR 0xfe000000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_info *mymtd;
-
-static struct map_info rpxlite_map = {
- .name = "RPX",
- .size = WINDOW_SIZE,
- .bankwidth = 4,
- .phys = WINDOW_ADDR,
-};
-
-static int __init init_rpxlite(void)
-{
- printk(KERN_NOTICE "RPX Lite or CLLF flash device: %x at %x\n", WINDOW_SIZE*4, WINDOW_ADDR);
- rpxlite_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
-
- if (!rpxlite_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&rpxlite_map);
- mymtd = do_map_probe("cfi_probe", &rpxlite_map);
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
- add_mtd_device(mymtd);
- return 0;
- }
-
- iounmap((void *)rpxlite_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_rpxlite(void)
-{
- if (mymtd) {
- del_mtd_device(mymtd);
- map_destroy(mymtd);
- }
- if (rpxlite_map.virt) {
- iounmap((void *)rpxlite_map.virt);
- rpxlite_map.virt = 0;
- }
-}
-
-module_init(init_rpxlite);
-module_exit(cleanup_rpxlite);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Arnold Christensen <AKC at pel.dk>");
-MODULE_DESCRIPTION("MTD map driver for RPX Lite and CLLF boards");
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 25e5e30..e56dd87 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -71,12 +71,6 @@ MODULE_LICENSE("Dual MPL/GPL");
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-/* The RPX series use SLOT_B */
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-#define CONFIG_PCMCIA_SLOT_B
-#define CONFIG_BD_IS_MHZ
-#endif
-
/* The ADS board use SLOT_A */
#ifdef CONFIG_ADS
#define CONFIG_PCMCIA_SLOT_A
@@ -256,81 +250,6 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev);
#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
-/* ------------------------------------------------------------------------- */
-/* board specific stuff: */
-/* voltage_set(), hardware_enable() and hardware_disable() */
-/* ------------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet */
-
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-
-#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
-
-#undef PCMCIA_BMT_LIMIT
-#define PCMCIA_BMT_LIMIT (6*8)
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCVCTL4;
- break;
- case 50:
- reg |= BCSR1_PCVCTL5;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCVCTL6;
- else
- return 1;
- break;
- case 120:
- reg |= BCSR1_PCVCTL7;
- default:
- return 1;
- }
-
- if (!((vcc == 50) || (vcc == 0)))
- return 1;
-
- /* first, turn off all power */
-
- out_be32(((u32 *) RPX_CSR_ADDR),
- in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
- BCSR1_PCVCTL5 |
- BCSR1_PCVCTL6 |
- BCSR1_PCVCTL7));
-
- /* enable new powersettings */
-
- out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_RPXCLASSIC */
-
/* FADS Boards from Motorola */
#if defined(CONFIG_FADS)
--
1.7.0.4
More information about the linux-mtd
mailing list