[PATCH] Fix Oops with Atmel SPI

[Artem Bityutskiy]

On Tue, 2010-04-13 at 13:31 +0200, Anders Larsen wrote:
> Tweak MTD's cache allocation to make it work with the atmel DMA'ed SPI.
> Substitute kmalloc for vmalloc so the cache buffer is mappable as per
> the Atmel SPI driver's requirements, otherwise an Oops would occur.
> 
> The original patch by Ian McDonnell <ian at brightstareng.com> was found here:
> http://lists.infradead.org/pipermail/linux-mtd/2007-December/020184.html
> 
> Signed-off-by: Anders Larsen <al at alarsen.net>
> Cc: Ian McDonnell <ian at brightstareng.com>
> Cc: David Woodhouse <dwmw2 at infradead.org>
> Cc: Matthias Kaehlcke <matthias at kaehlcke.net>
> Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
> Cc: Nicolas Pitre <nico at fluxnic.net>
> ---
>  drivers/mtd/mtdblock.c |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> Index: b/drivers/mtd/mtdblock.c
> ===================================================================
> --- a/drivers/mtd/mtdblock.c
> +++ b/drivers/mtd/mtdblock.c
> @@ -253,7 +253,11 @@ static int mtdblock_writesect(struct mtd
>  {
>  	struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
>  	if (unlikely(!mtdblk->cache_data && mtdblk->cache_size)) {
> +#ifdef CONFIG_SPI_ATMEL
> +		mtdblk->cache_data = kmalloc(mtdblk->mtd->erasesize, GFP_KERNEL);
> +#else
>  		mtdblk->cache_data = vmalloc(mtdblk->mtd->erasesize);
> +#endif
>  		if (!mtdblk->cache_data)
>  			return -EINTR;
>  		/* -EINTR is not really correct, but it is the best match
> @@ -322,7 +326,11 @@ static int mtdblock_release(struct mtd_b
>  		mtdblks[dev] = NULL;
>  		if (mtdblk->mtd->sync)
>  			mtdblk->mtd->sync(mtdblk->mtd);
> +#ifdef CONFIG_SPI_ATMEL
> +		kfree(mtdblk->cache_data);
> +#else
>  		vfree(mtdblk->cache_data);
> +#endif
>  		kfree(mtdblk);
>  	}

This is an old problem. Instead of doing this dirty hack, change the
code and teach it to work with array of 1-4 pages , not with buffers.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)