[PATCH] UBIFS: Add /dev/ubiX_Y naming scheme in open_ubi

[Artem Bityutskiy]

On Fri, 2009-09-25 at 00:47 +0200, Corentin Chary wrote:
> This is needed to use $ mount /dev/ubi0_0 /mnt/nand
> You'll also need a recent libblkid with UBI and UBIFS
> support.
> 
> Signed-off-by: Corentin Chary <corentincj at iksaif.net>
> ---
>  fs/ubifs/super.c |   12 ++++++++----
>  1 files changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
> index 7e2b3d4..38320ad 100644
> --- a/fs/ubifs/super.c
> +++ b/fs/ubifs/super.c
> @@ -1843,10 +1843,11 @@ const struct super_operations ubifs_super_operations = {
>   * @mode: UBI volume open mode
>   *
>   * There are several ways to specify UBI volumes when mounting UBIFS:
> - * o ubiX_Y    - UBI device number X, volume Y;
> - * o ubiY      - UBI device number 0, volume Y;
> - * o ubiX:NAME - mount UBI device X, volume with name NAME;
> - * o ubi:NAME  - mount UBI device 0, volume with name NAME.
> + * o /dev/ubiX_Y - UBI device number X, volume Y;
> + * o ubiX_Y      - UBI device number X, volume Y;
> + * o ubiY        - UBI device number 0, volume Y;
> + * o ubiX:NAME   - mount UBI device X, volume with name NAME;
> + * o ubi:NAME    - mount UBI device 0, volume with name NAME.
>   *
>   * Alternative '!' separator may be used instead of ':' (because some shells
>   * like busybox may interpret ':' as an NFS host name separator). This function
> @@ -1858,6 +1859,9 @@ static struct ubi_volume_desc *open_ubi(const char *name, int mode)
>  	int dev, vol;
>  	char *endptr;
>  
> +	if (!strncmp("/dev/", name, 5))
> +		name = name + 5;
> +
>  	if (name[0] != 'u' || name[1] != 'b' || name[2] != 'i')
>  		return ERR_PTR(-EINVAL);

But UBI volume may have arbitrary names. Could we invent something
better?

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)