Oops on 2.6.31 with udev and root using ubifs

[Kyungmin Park]

Hi,

I think it's not ubifs bug. Instead it's related with mtd_blkdev.

Before read the ubi glue layer it should be call the get_device first.

Please see the following patch

http://git.infradead.org/mtd-2.6.git/commitdiff/8022c13c27b822cf22f13df10b42aae89cd56bf0

Thank you,
Kyungmin Park

On Wed, Sep 16, 2009 at 4:02 AM, Raphael Derosso Pereira
<raphael.pereira at dataprom.com> wrote:
> Hello,
>
> I have just compiled a UBIFS enable 2.6.31 kernel and when I use it to
> boot with a NAND ubifs root partition, as soon as the udev daemon starts
> to populate the nodes, I get a Oops:
>
> [   59.261166] Unable to handle kernel paging request at virtual address
> fffffff0
> [   59.283061] pgd = c0004000
> [   59.291211] [fffffff0] *pgd=a0906021, *pte=00000000, *ppte=00000000
> [   59.317151] Internal error: Oops: 17 [#1] PREEMPT
> [   59.331114] Modules linked in:
> [   59.340167] CPU: 0    Not tainted  (2.6.31-cmx0sc #20)
> [   59.355456] PC is at ubi_leb_read+0x14/0x190
> [   59.368136] LR is at gluebi_read+0xdc/0x114
> [   59.380566] pc : [<c021c070>]    lr : [<c0223ef0>]    psr: 60000013
> [   59.380581] sp : e39b1eb8  ip : e39b1ef8  fp : e39b1ef4
> [   59.414702] r10: e3cbe4c0  r9 : 00000200  r8 : 00000000
> [   59.430237] r7 : e393e000  r6 : e3c5b000  r5 : 00000200  r4 :
> 00000200
> [   59.449648] r3 : 00000000  r2 : e3c5b000  r1 : 00000000  r0 :
> fffffff0
> [   59.469060] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM
> Segment kernel
> [   59.490795] Control: 0000397f  Table: c3d74018  DAC: 00000035
> [   59.507880] Process mtdblockd (pid: 293, stack limit = 0xe39b0278)
> [   59.526255] Stack: (0xe39b1eb8 to 0xe39b2000)
> [   59.539200] 1ea0:
> c019effc e39b61c0
> [   59.563754] 1ec0: e3be1640 00000000 00000000 00000200 00000200
> e3c5b000 e393e000 00000000
> [   59.588306] 1ee0: 00000200 e3cbe4c0 e39b1f34 e39b1ef8 c0223ef0
> c021c068 00000200 00000000
> [   59.612861] 1f00: 00000000 00000000 e3be1640 00000000 e39b1f4c
> 00000200 00000000 00000000
> [   59.637415] 1f20: 0001f000 e3c5b000 e39b1f84 e39b1f38 c020d0dc
> c0223e20 00000200 e39b1f54
> [   59.661968] 1f40: e3c5b000 e3be1640 e39b1f6c e393e000 c0190cb0
> c019b0c0 00000008 00000008
> [   59.686522] 1f60: e3be1640 00000000 c03fc1dc e3c5b000 00000000
> e39ab900 e39b1fc4 e39b1f88
> [   59.711076] 1f80: c020c8a0 c020d08c c02d8350 e39b0000 e39ab910
> e39b61c0 e39b1fc4 e3823f08
> [   59.735629] 1fa0: c03fc1dc c020c690 00000000 00000000 00000000
> 00000000 e39b1ff4 e39b1fc8
> [   59.760183] 1fc0: c005ff28 c020c69c 00000000 00000000 e39b1fd0
> e39b1fd0 00000000 00000000
> [   59.784738] 1fe0: 00000000 00000000 00000000 e39b1ff8 c0025fe8
> c005feac 2064656c 72642600
> [   59.809306] [<c021c070>] (ubi_leb_read+0x14/0x190) from [<c0223ef0>]
> (gluebi_read+0xdc/0x114)
> [   59.834650] [<c0223ef0>] (gluebi_read+0xdc/0x114) from [<c020d0dc>]
> (mtdblock_readsect+0x5c/0x134)
> [   59.861298] [<c020d0dc>] (mtdblock_readsect+0x5c/0x134) from
> [<c020c8a0>] (mtd_blktrans_thread+0x210/0x32c)
> [   59.890244] [<c020c8a0>] (mtd_blktrans_thread+0x210/0x32c) from
> [<c005ff28>] (kthread+0x88/0x90)
> [   59.916376] [<c005ff28>] (kthread+0x88/0x90) from [<c0025fe8>]
> (kernel_thread_exit+0x0/0x8)
> [   59.941211] Code: e92ddff0 e24cb004 e24dd014 ebf823de (e5904000)
>
>
> I think that the problem may be ralated to the fact that /dev/mtd6,
> which is emulated from ubi0_0 is "double-accessed" without proper lock
> or something else. Can someone give me a hint?
>
> Best Regards,
>
> P.S.: I'm not subscribed on the list
>
> --
> Raphael Derosso Pereira
> DATAPROM®
> Departamento de Engenharia
> Tel.: +55 41 3014-1325
> Fax.: +55 41 3014-1201
>
> raphael.pereira at dataprom.com
>
> www.dataprom.com
>
>
>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>