Problem with flash _info

Fri Sep 11 06:43:11 EDT 2009

----- Original Message ----- 
From: "Rahanesh" <rahanesh at tataelxsi.co.in>
To: <linux-mtd at lists.infradead.org>
Sent: Friday, September 11, 2009 3:44 PM
Subject: Problem with flash _info

> Hi all,
>
> I am using flash_info command on board. i have 4 mtd devices. /dev/mtd0, /dev/mtd1, /dev/mtd2, 
> /dev/mtd3.
>
> how do i find the size of each mtd device.? I used flash_info.

  flash_info has some problem in mtd-utils. I also observed the same.
  You can try "mtd_debug" to get the size of the mtd device.
  $mtd_debug info /dev/mtd2

> But when i used that i got the following message. "Device /dev/mtd2 has 0 erase regions". It is 
> same for all the mtd devices.
>
> What might be the problem?
>
> Please help
>
> Rahanesh
> .
>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/ 