[PATCH 3/3 -v3] MTD: Add nand_ecc test module
akinobu.mita at gmail.com
Wed Oct 21 23:24:15 EDT 2009
On Wed, Oct 21, 2009 at 11:51:35AM +0300, Artem Bityutskiy wrote:
> On Wed, 2009-10-21 at 17:34 +0900, Akinobu Mita wrote:
> > This module tests NAND ECC functions.
> > The test is simple.
> > 1. Create a 256 or 512 bytes block of data filled with random bytes (data)
> > 2. Duplicate the data block and inject single bit error (error_data)
> > 3. Try to correct error_data
> > 4. Compare data and error_data
> > Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
> > Cc: David Woodhouse <dwmw2 at infradead.org>
> > Cc: linux-mtd at lists.infradead.org
> > Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
> > Cc: vimal singh <vimal.newwork at gmail.com>
> > ---
> > drivers/mtd/tests/Makefile | 1 +
> > drivers/mtd/tests/nand_ecc-test.c | 87 +++++++++++++++++++++++++++++++++++++
> > 2 files changed, 88 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/mtd/tests/nand_ecc-test.c
> How about a consistent name for the test? All current tests have 'mtd_'
> prefix. How about make the file to be 'mtd_ecctest.c' ?
OK. I'll rename to mtd_nandecctest.c as vimal said.
> Also, since you anyway need to use these "#defines", I think there is
> not need to use this splitting. I apologize for leading you that way at
> the beginning.
Does it mean we don't need MTD_NAND_TESTS and the new mtd_nandecctest
should exist in MTD_TESTS with that #ifdef checks as I originally did?
More information about the linux-mtd