[PATCH 2/3 -v3] MTD: Add MTD NAND tests support

[Akinobu Mita]

This creates new MTD test group called MTD NAND tests which require
MTD NAND device support and moves mtd_oobtest, mtd_pagetest,
and mtd_subpagetest into this group.

Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: linux-mtd at lists.infradead.org
Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
Cc: vimal singh <vimal.newwork at gmail.com>
---
 drivers/mtd/Kconfig        |    7 +++++++
 drivers/mtd/tests/Makefile |    6 +++---
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index ecf90f5..e2e22fa 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -33,6 +33,13 @@ config MTD_TESTS
 	  should normally be compiled as kernel modules. The modules perform
 	  various checks and verifications when loaded.
 
+config MTD_NAND_TESTS
+	tristate "MTD NAND tests support"
+	depends on MTD_TESTS
+	depends on MTD_NAND || MTD_ONENAND
+	help
+	  This option enables MTD tests which require NAND Device support.
+
 config MTD_CONCAT
 	tristate "MTD concatenating support"
 	help
diff --git a/drivers/mtd/tests/Makefile b/drivers/mtd/tests/Makefile
index c1d5013..919d066 100644
--- a/drivers/mtd/tests/Makefile
+++ b/drivers/mtd/tests/Makefile
@@ -1,7 +1,7 @@
-obj-$(CONFIG_MTD_TESTS) += mtd_oobtest.o
-obj-$(CONFIG_MTD_TESTS) += mtd_pagetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_readtest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_speedtest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_stresstest.o
-obj-$(CONFIG_MTD_TESTS) += mtd_subpagetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_torturetest.o
+obj-$(CONFIG_MTD_NAND_TESTS) += mtd_oobtest.o
+obj-$(CONFIG_MTD_NAND_TESTS) += mtd_pagetest.o
+obj-$(CONFIG_MTD_NAND_TESTS) += mtd_subpagetest.o
-- 
1.5.4.3