UBIFS problem on MPC8536DS

Felix Radensky felix at embedded-sol.com
Thu Oct 15 08:49:04 EDT 2009


Hi, Norbert

Norbert van Bolhuis wrote:
> Hi Felix,
>
> do you have CONFIG_NO_HZ defined ?
>
> I've seen similar problems with powerpc + CONFIG_NO_HZ. In my case the 
> low-level
> do_write_buffer (cfi_cmdset_0002.c) timed out too early. See
> http://lkml.org/lkml/2009/9/3/84
>
> Maybe in your case it's the do_erase_chip timing out too early.
>
> ---
> NvBolhuis.
>
Thanks for suggestion.

I have CONFIG_NO_HZ defined, but disabling it doesn't help.
I my case timeouts occur in NAND driver, fsl_elbc_nand.c

Felix.



More information about the linux-mtd mailing list