[PATCH 1/3] eLBC NAND: increase bus timeout to maximum

[Artem Bityutskiy]

On Fri, 2009-11-13 at 14:12 -0600, Scott Wood wrote:
> When a NAND operation is in progress, all other localbus operations
> (including NOR flash) will have to wait for access to the bus.  However, the
> NAND operation may take longer to complete than the default timeout.  Thus,
> if NOR is accessed while a NAND operation is in progress, the NAND operation
> will fail.
> 
> Signed-off-by: Scott Wood <scottwood at freescale.com>

Taken the patches to my l2-mtd-2.6 tree.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)