[PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards

Nishanth Menon nm at ti.com
Thu Nov 19 09:20:04 EST 2009


Vimal Singh had written, on 11/19/2009 08:16 AM, the following:
> From 43df1ee9e29d454100e59ee4902db157072b81b6 Mon Sep 17 00:00:00 2001
> From: Vimal Singh <vimalsingh at ti.com>
> Date: Thu, 19 Nov 2009 14:37:44 +0530
> Subject: [PATCH] OMAP3: Add support for NAND on ZOOM/LDP boards
> 
> Adding NAND support for ZOOM2/3 and LDP board.
> I have tested it for ZOOM2 boards. Someone can verify it for LDP
> and ZOOM3 boards, hopefully it should not have any problem.
> 
> The size of the U-Boot environment partition was increased to 1.25MB.
> 
> Vikram: Changed ldp name to zoom.
>       Future boards will be called Zoom2/3/4 etc.
>       LDP is a Zoom1. Somhow the LDP name got stuck to that.
> 
> Signed-off-by: Vimal Singh <vimalsingh at ti.com>
> Cc: Vikram Pandita <vikram.pandita at ti.com>
> Cc: Tony Lindgren <tony at atomide.com>
> ---
>  arch/arm/mach-omap2/Makefile                 |    3 +
>  arch/arm/mach-omap2/board-ldp.c              |    2 +
>  arch/arm/mach-omap2/board-zoom-flash.c       |   92 ++++++++++++++++++++++++++
>  arch/arm/mach-omap2/board-zoom-peripherals.c |    2 +
>  arch/arm/plat-omap/include/plat/board-zoom.h |   36 ++++++++++
>  5 files changed, 135 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-zoom-flash.c
>  create mode 100644 arch/arm/plat-omap/include/plat/board-zoom.h
> 
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index b0e5b46..c2ca76e 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
>  obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
>  					   mmc-twl4030.o
>  obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
> +					   board-zoom-flash.o \
>  					   mmc-twl4030.o
>  obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
>  					   mmc-twl4030.o
> @@ -78,10 +79,12 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
>  					   board-rx51-peripherals.o \
>  					   mmc-twl4030.o
>  obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
> + 					   board-zoom-flash.o \
>  					   board-zoom-peripherals.o \
>  					   mmc-twl4030.o \
>  					   board-zoom-debugboard.o
>  obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
> + 					   board-zoom-flash.o \
>  					   board-zoom-peripherals.o \
>  					   mmc-twl4030.o \
>  					   board-zoom-debugboard.o
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index c062238..8aebdf9 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -42,6 +42,7 @@
>  #include <asm/delay.h>
>  #include <plat/control.h>
>  #include <plat/usb.h>
> +#include <plat/board-zoom.h>
> 
>  #include "mmc-twl4030.h"
> 
> @@ -385,6 +386,7 @@ static void __init omap_ldp_init(void)
>  	ads7846_dev_init();
>  	omap_serial_init();
>  	usb_musb_init();
> +	zoom_flash_init();
> 
>  	twl4030_mmc_init(mmc);
>  	/* link regulators to MMC adapters */
> diff --git a/arch/arm/mach-omap2/board-zoom-flash.c
> b/arch/arm/mach-omap2/board-zoom-flash.c
> new file mode 100644
> index 0000000..1867d6a
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-zoom-flash.c
> @@ -0,0 +1,92 @@
> +/*
> + * board-zoom-flash.c
> + *
> + * Copyright (C) 2008-09 Texas Instruments Inc.
> + *
> + * Modified from mach-omap2/board-2430sdp-flash.c
> + * Author(s): Vimal Singh <vimalsingh at ti.com>
> + *            Rohit Choraria <rohitkc at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +
> +#include <asm/mach/flash.h>
> +#include <plat/board.h>
> +#include <plat/gpmc.h>
> +#include <plat/nand.h>
> +
> +#include <plat/board-zoom.h>
> +
> +static struct mtd_partition zoom_nand_partitions[] = {
> +	/* All the partition sizes are listed in terms of NAND block size */
> +	{
> +		.name		= "X-Loader-NAND",
> +		.offset		= 0,
> +		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
> +		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
> +	},
> +	{
> +		.name		= "U-Boot-NAND",
> +		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
> +		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
> +		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
> +	},
> +	{
> +		.name		= "Boot Env-NAND",
> +		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
> +		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
> +	},
> +	{
> +		.name		= "Kernel-NAND",
> +		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
> +		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
> +	},
> +	{
> +		.name		= "File System - NAND",
> +		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
> +		.size		= MTDPART_SIZ_FULL,
> +	},
> +};
> +
> +/* NAND chip access: 16 bit */
> +static struct omap_nand_platform_data zoom_nand_data = {
> +	.parts		= zoom_nand_partitions,
> +	.nr_parts	= ARRAY_SIZE(zoom_nand_partitions),
> +	.nand_setup	= NULL,
> +	.dma_channel	= -1,	/* disable DMA in OMAP NAND driver */
> +	.dev_ready	= NULL,
> +	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
> +};
> +
> +/**
> + * zoom_flash_init - Identify devices connected to GPMC and register.
> + *
> + * @return - void.
> + */
> +void __init zoom_flash_init(void)

Should take CS number as a parameter -> this will break SDP3630 otherwise.

> +{
> +	u8 nandcs = GPMC_CS_NUM + 1;
> +	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
> +
> +	/* pop nand part */
> +	nandcs = LDP3430_NAND_CS;
> +
> +	zoom_nand_data.cs = nandcs;
> +	zoom_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add +
> +					GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
> +	zoom_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
> +
> +	gpmc_nand_init(&zoom_nand_data);
> +}
> +
> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c
> b/arch/arm/mach-omap2/board-zoom-peripherals.c
> index f14baa3..fcc2836 100755
> --- a/arch/arm/mach-omap2/board-zoom-peripherals.c
> +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
> @@ -21,6 +21,7 @@
>  #include <asm/mach/arch.h>
>  #include <asm/mach/map.h>
> 
> +#include <plat/board-zoom.h>
>  #include <plat/common.h>
>  #include <plat/usb.h>
> 
> @@ -264,4 +265,5 @@ void __init zoom_peripherals_init(void)
>  	omap_i2c_init();
>  	omap_serial_init();
>  	usb_musb_init();
> +	zoom_flash_init();
probably should be called by board files independently. zoom-peripherals 
get used by sdp3630,zoom2, zoom3.

>  }
> diff --git a/arch/arm/plat-omap/include/plat/board-zoom.h
> b/arch/arm/plat-omap/include/plat/board-zoom.h
> new file mode 100644
> index 0000000..8d63f7e
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/plat/board-zoom.h
> @@ -0,0 +1,36 @@
> +/*
> + * board-zoom.h
> + *
> + * Hardware definitions for TI OMAP3 LDP/ZOOM2.
> + *
> + * Copyright (C) 2008-09 Texas Instruments Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __ASM_ARCH_OMAP_LDP_H
> +#define __ASM_ARCH_OMAP_LDP_H
> +
> +extern void zoom_flash_init(void);
> +
> +#define LDP3430_NAND_CS               0
> +
> +#endif /* __ASM_ARCH_OMAP_LDP_H */


-- 
Regards,
Nishanth Menon



More information about the linux-mtd mailing list