[PATCH] NAND: davinci: update clock naming

[David Brownell]

On Friday 29 May 2009, Kevin Hilman wrote:
> DaVinci clock support has been updated in mainline.
> Update clock names accordingly.

... and before 2.6.30-final ships, please.

Acked-by: David Brownell <dbrownell at users.sourceforge.net>


> 
> Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
> ---
>  drivers/mtd/nand/davinci_nand.c |    7 ++++---
>  1 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> index 0119220..02700f7 100644
> --- a/drivers/mtd/nand/davinci_nand.c
> +++ b/drivers/mtd/nand/davinci_nand.c
> @@ -407,16 +407,17 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
>  	}
>  	info->chip.ecc.mode = ecc_mode;
>  
> -	info->clk = clk_get(&pdev->dev, "AEMIFCLK");
> +	info->clk = clk_get(&pdev->dev, "aemif");
>  	if (IS_ERR(info->clk)) {
>  		ret = PTR_ERR(info->clk);
> -		dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret);
> +		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
>  		goto err_clk;
>  	}
>  
>  	ret = clk_enable(info->clk);
>  	if (ret < 0) {
> -		dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret);
> +		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
> +			ret);
>  		goto err_clk_enable;
>  	}
>  
> -- 
> 1.6.2.2
> 
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source at linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> 
>