[patch/RESEND 2.6.30-rc2 2/3] NAND: minor davinci_nand cleanup

Kevin Hilman khilman at deeprootsystems.com
Fri May 29 20:15:13 EDT 2009


David Brownell <david-b at pacbell.net> writes:

> From: David Brownell <dbrownell at users.sourceforge.net>
>
> Make the DaVinci NAND driver require platform_data with
> board-specific configuration.  We can't actually do any
> kind of sane job of configuring it otherwise.
>
> Also fix the comment about picking the "best" ECC mode.
>
> We can't do those any more; that relied on knowing what kind
> of CPU we're using (they don't all support 4-bit ECC), and
> current policy is that drivers not have cpu_is_*() checks.
>
> Signed-off-by: David Brownell <dbrownell at users.sourceforge.net>

AFAICT, this still hasn't been merged yet.  In case it helps:

Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>

> ---
> RESEND 7-april version -- refreshing against current kernel
> Seems appropriate for 2.6.30 merge, but not essential.

Would be nice to see this in 2.6.31.

Kevin

>  drivers/mtd/nand/davinci_nand.c |   27 +++++++++++----------------
>  1 file changed, 11 insertions(+), 16 deletions(-)
>
> --- a/drivers/mtd/nand/davinci_nand.c
> +++ b/drivers/mtd/nand/davinci_nand.c
> @@ -306,6 +306,10 @@ static int __init nand_davinci_probe(str
>  	uint32_t			val;
>  	nand_ecc_modes_t		ecc_mode;
>  
> +	/* insist on board-specific configuration */
> +	if (!pdata)
> +		return -ENODEV;
> +
>  	/* which external chipselect will we be managing? */
>  	if (pdev->id < 0 || pdev->id > 3)
>  		return -ENODEV;
> @@ -351,7 +355,7 @@ static int __init nand_davinci_probe(str
>  	info->chip.select_chip	= nand_davinci_select_chip;
>  
>  	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
> -	info->chip.options	= pdata ? pdata->options : 0;
> +	info->chip.options	= pdata->options;
>  
>  	info->ioaddr		= (uint32_t __force) vaddr;
>  
> @@ -360,14 +364,8 @@ static int __init nand_davinci_probe(str
>  	info->mask_chipsel	= pdata->mask_chipsel;
>  
>  	/* use nandboot-capable ALE/CLE masks by default */
> -	if (pdata && pdata->mask_ale)
> -		info->mask_ale	= pdata->mask_cle;
> -	else
> -		info->mask_ale	= MASK_ALE;
> -	if (pdata && pdata->mask_cle)
> -		info->mask_cle	= pdata->mask_cle;
> -	else
> -		info->mask_cle	= MASK_CLE;
> +	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
> +	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
>  
>  	/* Set address of hardware control function */
>  	info->chip.cmd_ctrl	= nand_davinci_hwcontrol;
> @@ -377,11 +375,8 @@ static int __init nand_davinci_probe(str
>  	info->chip.read_buf     = nand_davinci_read_buf;
>  	info->chip.write_buf    = nand_davinci_write_buf;
>  
> -	/* use board-specific ECC config; else, the best available */
> -	if (pdata)
> -		ecc_mode = pdata->ecc_mode;
> -	else
> -		ecc_mode = NAND_ECC_HW;
> +	/* Use board-specific ECC config */
> +	ecc_mode		= pdata->ecc_mode;
>  
>  	switch (ecc_mode) {
>  	case NAND_ECC_NONE:
> @@ -469,7 +464,7 @@ static int __init nand_davinci_probe(str
>  			info->mtd.name = master_name;
>  		}
>  
> -		if (mtd_parts_nb <= 0 && pdata) {
> +		if (mtd_parts_nb <= 0) {
>  			mtd_parts = pdata->parts;
>  			mtd_parts_nb = pdata->nr_parts;
>  		}
> @@ -482,7 +477,7 @@ static int __init nand_davinci_probe(str
>  				info->partitioned = true;
>  		}
>  
> -	} else if (pdata && pdata->nr_parts) {
> +	} else if (pdata->nr_parts) {
>  		dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n",
>  				pdata->nr_parts, info->mtd.name);
>  	}
>
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source at linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source



More information about the linux-mtd mailing list