[patch/rfc 2.6.29 1/2] MTD: driver model updates
David Brownell
david-b at pacbell.net
Tue Mar 31 17:18:53 EDT 2009
On Thursday 26 March 2009, David Brownell wrote:
> From: David Brownell <dbrownell at users.sourceforge.net>
>
> Update driver model support in the MTD framework, so it fits
> better into the current udev-based hotplug framework:
Hmm, no comments? I had understood there was interest over on
the MTD side of things in exposing more information through
sysfs, to help avoid the need to add Even More Ioctls as part
of support for things like NAND chips with 4KB pages, or which
handle more than 4GBytes ...
>
> - Each mtd_info now has a device node. MTD drivers should set
> the dev.parent field to point to the physical device, before
> setting up partitions or otherwise declaring MTDs.
>
> - Those device nodes always map to /sys/class/mtdX device nodes,
> which no longer depend on MTD_CHARDEV.
>
> - Those mtdX sysfs nodes have a "starter set" of attributes;
> it's not yet sufficient to replace /proc/mtd.
>
> - Enabling MTD_CHARDEV provides /sys/class/mtdXro/ nodes and the
> /sys/class/mtd*/dev attributes (for udev, mdev, etc).
>
> - Include a MODULE_ALIAS_CHARDEV_MAJOR macro. It'll work with
> udev creating the /dev/mtd* nodes, not just a static rootfs.
>
> So the sysfs structure is pretty much what you'd expect, except
> that readonly chardev nodes are a bit quirky.
>
> Signed-off-by: David Brownell <dbrownell at users.sourceforge.net>
> ---
> Sanity tested with NOR (physmap, omap_nor, m25p80), DataFlash,
> NAND (davinci, omap), OneNand (omap); with and without mtdblock.
> With converted MTD drivers, /sys/devices/virtual/mtd/* are gone.
> Didn't test modular configs.
>
> drivers/mtd/mtd_blkdevs.c | 1
> drivers/mtd/mtdchar.c | 47 ++---------------
> drivers/mtd/mtdcore.c | 115 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/mtdpart.c | 9 +++
> include/linux/mtd/mtd.h | 7 ++
> 5 files changed, 137 insertions(+), 42 deletions(-)
>
> --- a/drivers/mtd/mtd_blkdevs.c
> +++ b/drivers/mtd/mtd_blkdevs.c
> @@ -286,6 +286,7 @@ int add_mtd_blktrans_dev(struct mtd_blkt
> gd->private_data = new;
> new->blkcore_priv = gd;
> gd->queue = tr->blkcore_priv->rq;
> + gd->driverfs_dev = new->mtd->dev.parent;
>
> if (new->readonly)
> set_disk_ro(gd, 1);
> --- a/drivers/mtd/mtdchar.c
> +++ b/drivers/mtd/mtdchar.c
> @@ -19,33 +19,6 @@
>
> #include <asm/uaccess.h>
>
> -static struct class *mtd_class;
> -
> -static void mtd_notify_add(struct mtd_info* mtd)
> -{
> - if (!mtd)
> - return;
> -
> - device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
> - NULL, "mtd%d", mtd->index);
> -
> - device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
> - NULL, "mtd%dro", mtd->index);
> -}
> -
> -static void mtd_notify_remove(struct mtd_info* mtd)
> -{
> - if (!mtd)
> - return;
> -
> - device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2));
> - device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1));
> -}
> -
> -static struct mtd_notifier notifier = {
> - .add = mtd_notify_add,
> - .remove = mtd_notify_remove,
> -};
>
> /*
> * Data structure to hold the pointer to the mtd device as well
> @@ -793,34 +766,26 @@ static const struct file_operations mtd_
>
> static int __init init_mtdchar(void)
> {
> - if (register_chrdev(MTD_CHAR_MAJOR, "mtd", &mtd_fops)) {
> + int status;
> +
> + status = register_chrdev(MTD_CHAR_MAJOR, "mtd", &mtd_fops);
> + if (status < 0) {
> printk(KERN_NOTICE "Can't allocate major number %d for Memory Technology Devices.\n",
> MTD_CHAR_MAJOR);
> - return -EAGAIN;
> }
>
> - mtd_class = class_create(THIS_MODULE, "mtd");
> -
> - if (IS_ERR(mtd_class)) {
> - printk(KERN_ERR "Error creating mtd class.\n");
> - unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
> - return PTR_ERR(mtd_class);
> - }
> -
> - register_mtd_user(¬ifier);
> - return 0;
> + return status;
> }
>
> static void __exit cleanup_mtdchar(void)
> {
> - unregister_mtd_user(¬ifier);
> - class_destroy(mtd_class);
> unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
> }
>
> module_init(init_mtdchar);
> module_exit(cleanup_mtdchar);
>
> +MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("David Woodhouse <dwmw2 at infradead.org>");
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -22,6 +22,9 @@
>
> #include "mtdcore.h"
>
> +
> +static struct class *mtd_class;
> +
> /* These are exported solely for the purpose of mtd_blkdevs.c. You
> should not use them for _anything_ else */
> DEFINE_MUTEX(mtd_table_mutex);
> @@ -32,6 +35,82 @@ EXPORT_SYMBOL_GPL(mtd_table);
>
> static LIST_HEAD(mtd_notifiers);
>
> +
> +#if defined(CONFIG_MTD_CHAR) || defined(CONFIG_MTD_CHAR_MODULE)
> +#define MTD_DEVT(index) MKDEV(MTD_CHAR_MAJOR, (index)*2)
> +#else
> +#define MTD_DEVT(index) 0
> +#endif
> +
> +/* REVISIT once MTD uses the driver model better, whoever allocates
> + * the mtd_info will probably want to use the release() hook...
> + */
> +static void mtd_release(struct device *dev)
> +{
> + struct mtd_info *mtd = dev_to_mtd(dev);
> +
> + /* remove /dev/mtdXro node if needed */
> + if (MTD_DEVT(mtd->index))
> + device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
> +}
> +
> +static ssize_t mtd_type_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct mtd_info *mtd = dev_to_mtd(dev);
> + char *type;
> +
> + switch (mtd->type) {
> + case MTD_ABSENT:
> + type = "absent";
> + break;
> + case MTD_RAM:
> + type = "ram";
> + break;
> + case MTD_ROM:
> + type = "rom";
> + break;
> + case MTD_NORFLASH:
> + type = "nor";
> + break;
> + case MTD_NANDFLASH:
> + type = "nand";
> + break;
> + case MTD_DATAFLASH:
> + type = "dataflash";
> + break;
> + case MTD_UBIVOLUME:
> + type = "ubi";
> + break;
> + default:
> + type = "unknown";
> + }
> +
> + return snprintf(buf, PAGE_SIZE, "%s\n", type);
> +}
> +static DEVICE_ATTR(mtd_type, S_IRUGO, mtd_type_show, NULL);
> +
> +static struct attribute *mtd_attrs[] = {
> + &dev_attr_mtd_type.attr,
> + /* FIXME provide a /proc/mtd superset */
> + NULL,
> +};
> +
> +struct attribute_group mtd_group = {
> + .attrs = mtd_attrs,
> +};
> +
> +struct attribute_group *mtd_groups[] = {
> + &mtd_group,
> + NULL,
> +};
> +
> +static struct device_type mtd_devtype = {
> + .name = "mtd",
> + .groups = mtd_groups,
> + .release = mtd_release,
> +};
> +
> /**
> * add_mtd_device - register an MTD device
> * @mtd: pointer to new MTD device info structure
> @@ -40,6 +119,7 @@ static LIST_HEAD(mtd_notifiers);
> * notify each currently active MTD 'user' of its arrival. Returns
> * zero on success or 1 on failure, which currently will only happen
> * if the number of present devices exceeds MAX_MTD_DEVICES (i.e. 16)
> + * or there's a sysfs error.
> */
>
> int add_mtd_device(struct mtd_info *mtd)
> @@ -80,6 +160,23 @@ int add_mtd_device(struct mtd_info *mtd)
> mtd->name);
> }
>
> + /* Caller should have set dev.parent to match the
> + * physical device.
> + */
> + mtd->dev.type = &mtd_devtype;
> + mtd->dev.class = mtd_class;
> + mtd->dev.devt = MTD_DEVT(i);
> + dev_set_name(&mtd->dev, "mtd%d", i);
> + if (device_register(&mtd->dev) != 0) {
> + mtd_table[i] = NULL;
> + break;
> + }
> +
> + if (MTD_DEVT(i))
> + device_create(mtd_class, mtd->dev.parent,
> + MTD_DEVT(i) + 1,
> + NULL, "mtd%dro", i);
> +
> DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
> /* No need to get a refcount on the module containing
> the notifier, since we hold the mtd_table_mutex */
> @@ -343,6 +440,24 @@ EXPORT_SYMBOL_GPL(register_mtd_user);
> EXPORT_SYMBOL_GPL(unregister_mtd_user);
> EXPORT_SYMBOL_GPL(default_mtd_writev);
>
> +static int __init mtd_setup(void)
> +{
> + mtd_class = class_create(THIS_MODULE, "mtd");
> +
> + if (IS_ERR(mtd_class)) {
> + pr_err("Error creating mtd class.\n");
> + return PTR_ERR(mtd_class);
> + }
> + return 0;
> +}
> +core_initcall(mtd_setup);
> +
> +static void __exit mtd_teardown(void)
> +{
> + class_destroy(mtd_class);
> +}
> +__exitcall(mtd_teardown);
> +
> #ifdef CONFIG_PROC_FS
>
> /*====================================================================*/
> --- a/drivers/mtd/mtdpart.c
> +++ b/drivers/mtd/mtdpart.c
> @@ -343,6 +343,11 @@ static struct mtd_part *add_one_partitio
> slave->mtd.name = part->name;
> slave->mtd.owner = master->owner;
>
> + /* NOTE: we don't arrange MTDs as a tree; it'd be error-prone
> + * to have the same data be in two different partitions.
> + */
> + slave->mtd.dev.parent = master->dev.parent;
> +
> slave->mtd.read = part_read;
> slave->mtd.write = part_write;
>
> @@ -493,7 +498,9 @@ out_register:
> * This function, given a master MTD object and a partition table, creates
> * and registers slave MTD objects which are bound to the master according to
> * the partition definitions.
> - * (Q: should we register the master MTD object as well?)
> + *
> + * We don't register the master, or expect the caller to have done so,
> + * for reasons of data integrity.
> */
>
> int add_mtd_partitions(struct mtd_info *master,
> --- a/include/linux/mtd/mtd.h
> +++ b/include/linux/mtd/mtd.h
> @@ -11,6 +11,7 @@
> #include <linux/module.h>
> #include <linux/uio.h>
> #include <linux/notifier.h>
> +#include <linux/device.h>
>
> #include <linux/mtd/compatmac.h>
> #include <mtd/mtd-abi.h>
> @@ -223,6 +224,7 @@ struct mtd_info {
> void *priv;
>
> struct module *owner;
> + struct device dev;
> int usecount;
>
> /* If the driver is something smart, like UBI, it may need to maintain
> @@ -233,6 +235,11 @@ struct mtd_info {
> void (*put_device) (struct mtd_info *mtd);
> };
>
> +static inline struct mtd_info *dev_to_mtd(struct device *dev)
> +{
> + return dev ? container_of(dev, struct mtd_info, dev) : NULL;
> +}
> +
> static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
> {
> if (mtd->erasesize_shift)
>
More information about the linux-mtd
mailing list