mxc_nand: Problem with K9F1G08X0A Samsung flash

Claudio Lanconelli lanconelli.claudio at eptar.com
Fri Jun 26 06:35:17 EDT 2009


Hi Javier,
you can find the patch here:
http://lists.infradead.org/pipermail/linux-mtd/2009-May/025740.html

javier Martin ha scritto:
> Hello, I am using a Samsung K9F1G08X0A NAND flash with my i.mx27 based
> board and last stable 2.6.30 kernel.
> 
> I am experimenting the same problem as Alberto Panizzo
> (http://lists.infradead.org/pipermail/linux-mtd/2009-May/025704.html).
> Linux does not detect any correct block in my NAND flash.
> 
> Scanning device for bad blocks
> Bad eraseblock 0 at 0x000000000000
> Bad eraseblock 1 at 0x000000020000
> Bad eraseblock 2 at 0x000000040000
> Bad eraseblock 3 at 0x000000060000
> Bad eraseblock 4 at 0x000000080000
> Bad eraseblock 5 at 0x0000000a0000
> Bad eraseblock 6 at 0x0000000c0000
> Bad eraseblock 7 at 0x0000000e0000
> .... all blocks ...
> Bad eraseblock 2045 at 0x00000ffa0000
> Bad eraseblock 2046 at 0x00000ffc0000
> Bad eraseblock 2047 at 0x00000ffe0000
> RedBoot partition parsing not available
> Registering mxc_nand as whole device
> 
> I read some people saying that it is due to the lack of 2KB page
> support. Also Vladimir Barinov said he would post a patch for this in
> a separate thread but I couldn't find it.
> 
> Have you already solved this problem?
> 
> Thank you.
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
> 
> 




More information about the linux-mtd mailing list