[PATCH] MTD OneNAND: typo fixes
Kyungmin Park
kyungmin78 at gmail.com
Thu Jun 11 20:43:40 EDT 2009
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
On Wed, Jun 10, 2009 at 3:52 AM, Mika Korhonen<mika.j.korhonen at gmail.com> wrote:
> Signed-off-by: Mika Korhonen <mika.j.korhonen at gmail.com>
> ---
> drivers/mtd/onenand/onenand_base.c | 20 ++++++++++----------
> 1 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
> index 864327e..4c18736 100644
> --- a/drivers/mtd/onenand/onenand_base.c
> +++ b/drivers/mtd/onenand/onenand_base.c
> @@ -1182,7 +1182,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
> /*
> * Chip boundary handling in DDP
> * Now we issued chip 1 read and pointed chip 1
> - * bufferam so we have to point chip 0 bufferam.
> + * bufferram so we have to point chip 0 bufferram.
> */
> if (ONENAND_IS_DDP(this) &&
> unlikely(from == (this->chipsize >> 1))) {
> @@ -1858,8 +1858,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
> ONENAND_SET_NEXT_BUFFERRAM(this);
>
> /*
> - * 2 PLANE, MLC, and Flex-OneNAND doesn't support
> - * write-while-programe feature.
> + * 2 PLANE, MLC, and Flex-OneNAND do not support
> + * write-while-program feature.
> */
> if (!ONENAND_IS_2PLANE(this) && !first) {
> ONENAND_SET_PREV_BUFFERRAM(this);
> @@ -1870,7 +1870,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
> onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
> if (ret) {
> written -= prevlen;
> - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
> + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
> break;
> }
>
> @@ -1896,7 +1896,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
> /* In partial page write we don't update bufferram */
> onenand_update_bufferram(mtd, to, !ret && !subpage);
> if (ret) {
> - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
> + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
> break;
> }
>
> @@ -2192,7 +2192,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
> /* Grab the lock and see if the device is available */
> onenand_get_device(mtd, FL_ERASING);
>
> - /* Loop throught the pages */
> + /* Loop through the blocks */
> instr->state = MTD_ERASING;
>
> while (len) {
> @@ -2319,7 +2319,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
> if (bbm->bbt)
> bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
>
> - /* We write two bytes, so we dont have to mess with 16 bit access */
> + /* We write two bytes, so we don't have to mess with 16-bit access */
> ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
> /* FIXME : What to do when marking SLC block in partition
> * with MLC erasesize? For now, it is not advisable to
> @@ -2548,7 +2548,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
>
> #ifdef CONFIG_MTD_ONENAND_OTP
>
> -/* Interal OTP operation */
> +/* Internal OTP operation */
> typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
> size_t *retlen, u_char *buf);
>
> @@ -2912,7 +2912,7 @@ static void onenand_check_features(struct mtd_info *mtd)
> this->options |= ONENAND_HAS_2PLANE;
>
> case ONENAND_DEVICE_DENSITY_2Gb:
> - /* 2Gb DDP don't have 2 plane */
> + /* 2Gb DDP does not have 2 plane */
> if (!ONENAND_IS_DDP(this))
> this->options |= ONENAND_HAS_2PLANE;
> this->options |= ONENAND_HAS_UNLOCK_ALL;
> @@ -3374,7 +3374,7 @@ static int onenand_probe(struct mtd_info *mtd)
> /* It's real page size */
> this->writesize = mtd->writesize;
>
> - /* REVIST: Multichip handling */
> + /* REVISIT: Multichip handling */
>
> if (FLEXONENAND(this))
> flexonenand_get_size(mtd);
> --
> 1.6.0.4
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
More information about the linux-mtd
mailing list