mtd: Flex-OneNAND support

naveen yadav yad.naveen at gmail.com
Mon Jun 8 02:35:20 EDT 2009


Hi All,

I want to know in version 2.6.18. is samsung flexi one nand support is
there or not ?

Best Regards
Naveen

On Sat, Jun 6, 2009 at 12:29 AM, Linux-MTD Mailing
List<linux-mtd at lists.infradead.org> wrote:
> Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=5988af2319781bc8e0ce418affec4e09cfa77907
> Commit:     5988af2319781bc8e0ce418affec4e09cfa77907
> Parent:     67ce04bf2746f8a1f8c2a104b313d20c63f68378
> Author:     Rohit Hagargundgi <h.rohit at samsung.com>
> AuthorDate: Tue May 12 13:46:57 2009 -0700
> Committer:  David Woodhouse <David.Woodhouse at intel.com>
> CommitDate: Fri Jun 5 18:59:21 2009 +0100
>
>    mtd: Flex-OneNAND support
>
>    Add support for Samsung Flex-OneNAND devices.
>
>    Flex-OneNAND combines SLC and MLC technologies into a single device.
>    SLC area provides increased reliability and speed, suitable for storing
>    code such as bootloader, kernel and root file system.  MLC area
>    provides high density and is suitable for storing user data.
>
>    SLC and MLC regions can be configured through kernel parameter.
>
>    [akpm at linux-foundation.org: export flexoand_region and onenand_addr]
>    Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
>    Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>    Cc: Vishak G <vishak.g at samsung.com>
>    Signed-off-by: Andrew Morton <akpm at linux-foundation.org>
>    Signed-off-by: David Woodhouse <David.Woodhouse at intel.com>
> ---
>  Documentation/kernel-parameters.txt |   10 +
>  drivers/mtd/onenand/onenand_base.c  |  857 ++++++++++++++++++++++++++++++++---
>  drivers/mtd/onenand/onenand_bbt.c   |   14 +-
>  drivers/mtd/onenand/onenand_sim.c   |   81 +++-
>  include/linux/mtd/onenand.h         |   18 +
>  include/linux/mtd/onenand_regs.h    |   20 +-
>  6 files changed, 913 insertions(+), 87 deletions(-)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index e87bdbf..12df135 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -1380,6 +1380,16 @@ and is between 256 and 4096 characters. It is defined in the file
>        mtdparts=       [MTD]
>                        See drivers/mtd/cmdlinepart.c.
>
> +       onenand.bdry=   [HW,MTD] Flex-OneNAND Boundary Configuration
> +
> +                       Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
> +
> +                       boundary - index of last SLC block on Flex-OneNAND.
> +                                  The remaining blocks are configured as MLC blocks.
> +                       lock     - Configure if Flex-OneNAND boundary should be locked.
> +                                  Once locked, the boundary cannot be changed.
> +                                  1 indicates lock status, 0 indicates unlock status.
> +
>        mtdset=         [ARM]
>                        ARM/S3C2412 JIVE boot control
>
> diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
> index 2346857..8d4c9c2 100644
> --- a/drivers/mtd/onenand/onenand_base.c
> +++ b/drivers/mtd/onenand/onenand_base.c
> @@ -9,6 +9,10 @@
>  *     auto-placement support, read-while load support, various fixes
>  *     Copyright (C) Nokia Corporation, 2007
>  *
> + *     Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
> + *     Flex-OneNAND support
> + *     Copyright (C) Samsung Electronics, 2008
> + *
>  * This program is free software; you can redistribute it and/or modify
>  * it under the terms of the GNU General Public License version 2 as
>  * published by the Free Software Foundation.
> @@ -27,6 +31,30 @@
>
>  #include <asm/io.h>
>
> +/* Default Flex-OneNAND boundary and lock respectively */
> +static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
> +
> +/**
> + *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
> + *  For now, we expose only 64 out of 80 ecc bytes
> + */
> +static struct nand_ecclayout onenand_oob_128 = {
> +       .eccbytes       = 64,
> +       .eccpos         = {
> +               6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
> +               22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
> +               38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
> +               54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
> +               70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
> +               86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
> +               102, 103, 104, 105
> +               },
> +       .oobfree        = {
> +               {2, 4}, {18, 4}, {34, 4}, {50, 4},
> +               {66, 4}, {82, 4}, {98, 4}, {114, 4}
> +       }
> +};
> +
>  /**
>  * onenand_oob_64 - oob info for large (2KB) page
>  */
> @@ -65,6 +93,14 @@ static const unsigned char ffchars[] = {
>        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
>        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
>        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
>  };
>
>  /**
> @@ -171,6 +207,70 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)
>  }
>
>  /**
> + * flexonenand_block- For given address return block number
> + * @param this         - OneNAND device structure
> + * @param addr         - Address for which block number is needed
> + */
> +static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
> +{
> +       unsigned boundary, blk, die = 0;
> +
> +       if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
> +               die = 1;
> +               addr -= this->diesize[0];
> +       }
> +
> +       boundary = this->boundary[die];
> +
> +       blk = addr >> (this->erase_shift - 1);
> +       if (blk > boundary)
> +               blk = (blk + boundary + 1) >> 1;
> +
> +       blk += die ? this->density_mask : 0;
> +       return blk;
> +}
> +
> +inline unsigned onenand_block(struct onenand_chip *this, loff_t addr)
> +{
> +       if (!FLEXONENAND(this))
> +               return addr >> this->erase_shift;
> +       return flexonenand_block(this, addr);
> +}
> +
> +/**
> + * flexonenand_addr - Return address of the block
> + * @this:              OneNAND device structure
> + * @block:             Block number on Flex-OneNAND
> + *
> + * Return address of the block
> + */
> +static loff_t flexonenand_addr(struct onenand_chip *this, int block)
> +{
> +       loff_t ofs = 0;
> +       int die = 0, boundary;
> +
> +       if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
> +               block -= this->density_mask;
> +               die = 1;
> +               ofs = this->diesize[0];
> +       }
> +
> +       boundary = this->boundary[die];
> +       ofs += (loff_t)block << (this->erase_shift - 1);
> +       if (block > (boundary + 1))
> +               ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1);
> +       return ofs;
> +}
> +
> +loff_t onenand_addr(struct onenand_chip *this, int block)
> +{
> +       if (!FLEXONENAND(this))
> +               return (loff_t)block << this->erase_shift;
> +       return flexonenand_addr(this, block);
> +}
> +EXPORT_SYMBOL(onenand_addr);
> +
> +/**
>  * onenand_get_density - [DEFAULT] Get OneNAND density
>  * @param dev_id       OneNAND device ID
>  *
> @@ -183,6 +283,22 @@ static inline int onenand_get_density(int dev_id)
>  }
>
>  /**
> + * flexonenand_region - [Flex-OneNAND] Return erase region of addr
> + * @param mtd          MTD device structure
> + * @param addr         address whose erase region needs to be identified
> + */
> +int flexonenand_region(struct mtd_info *mtd, loff_t addr)
> +{
> +       int i;
> +
> +       for (i = 0; i < mtd->numeraseregions; i++)
> +               if (addr < mtd->eraseregions[i].offset)
> +                       break;
> +       return i - 1;
> +}
> +EXPORT_SYMBOL(flexonenand_region);
> +
> +/**
>  * onenand_command - [DEFAULT] Send command to OneNAND device
>  * @param mtd          MTD device structure
>  * @param cmd          the command to be sent
> @@ -207,16 +323,28 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
>                page = -1;
>                break;
>
> +       case FLEXONENAND_CMD_PI_ACCESS:
> +               /* addr contains die index */
> +               block = addr * this->density_mask;
> +               page = -1;
> +               break;
> +
>        case ONENAND_CMD_ERASE:
>        case ONENAND_CMD_BUFFERRAM:
>        case ONENAND_CMD_OTP_ACCESS:
> -               block = (int) (addr >> this->erase_shift);
> +               block = onenand_block(this, addr);
>                page = -1;
>                break;
>
> +       case FLEXONENAND_CMD_READ_PI:
> +               cmd = ONENAND_CMD_READ;
> +               block = addr * this->density_mask;
> +               page = 0;
> +               break;
> +
>        default:
> -               block = (int) (addr >> this->erase_shift);
> -               page = (int) (addr >> this->page_shift);
> +               block = onenand_block(this, addr);
> +               page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
>
>                if (ONENAND_IS_2PLANE(this)) {
>                        /* Make the even block number */
> @@ -236,7 +364,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
>                value = onenand_bufferram_address(this, block);
>                this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
>
> -               if (ONENAND_IS_2PLANE(this))
> +               if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this))
>                        /* It is always BufferRAM0 */
>                        ONENAND_SET_BUFFERRAM0(this);
>                else
> @@ -258,13 +386,18 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
>
>        if (page != -1) {
>                /* Now we use page size operation */
> -               int sectors = 4, count = 4;
> +               int sectors = 0, count = 0;
>                int dataram;
>
>                switch (cmd) {
> +               case FLEXONENAND_CMD_RECOVER_LSB:
>                case ONENAND_CMD_READ:
>                case ONENAND_CMD_READOOB:
> -                       dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
> +                       if (ONENAND_IS_MLC(this))
> +                               /* It is always BufferRAM0 */
> +                               dataram = ONENAND_SET_BUFFERRAM0(this);
> +                       else
> +                               dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
>                        break;
>
>                default:
> @@ -293,6 +426,30 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
>  }
>
>  /**
> + * onenand_read_ecc - return ecc status
> + * @param this         onenand chip structure
> + */
> +static inline int onenand_read_ecc(struct onenand_chip *this)
> +{
> +       int ecc, i, result = 0;
> +
> +       if (!FLEXONENAND(this))
> +               return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
> +
> +       for (i = 0; i < 4; i++) {
> +               ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i);
> +               if (likely(!ecc))
> +                       continue;
> +               if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
> +                       return ONENAND_ECC_2BIT_ALL;
> +               else
> +                       result = ONENAND_ECC_1BIT_ALL;
> +       }
> +
> +       return result;
> +}
> +
> +/**
>  * onenand_wait - [DEFAULT] wait until the command is done
>  * @param mtd          MTD device structure
>  * @param state                state to select the max. timeout value
> @@ -331,14 +488,14 @@ static int onenand_wait(struct mtd_info *mtd, int state)
>         * power off recovery (POR) test, it should read ECC status first
>         */
>        if (interrupt & ONENAND_INT_READ) {
> -               int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
> +               int ecc = onenand_read_ecc(this);
>                if (ecc) {
>                        if (ecc & ONENAND_ECC_2BIT_ALL) {
>                                printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
>                                mtd->ecc_stats.failed++;
>                                return -EBADMSG;
>                        } else if (ecc & ONENAND_ECC_1BIT_ALL) {
> -                               printk(KERN_INFO "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
> +                               printk(KERN_DEBUG "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
>                                mtd->ecc_stats.corrected++;
>                        }
>                }
> @@ -656,7 +813,7 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
>
>        if (found && ONENAND_IS_DDP(this)) {
>                /* Select DataRAM for DDP */
> -               int block = (int) (addr >> this->erase_shift);
> +               int block = onenand_block(this, addr);
>                int value = onenand_bufferram_address(this, block);
>                this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
>        }
> @@ -816,6 +973,149 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
>  }
>
>  /**
> + * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
> + * @param mtd          MTD device structure
> + * @param addr         address to recover
> + * @param status       return value from onenand_wait / onenand_bbt_wait
> + *
> + * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
> + * lower page address and MSB page has higher page address in paired pages.
> + * If power off occurs during MSB page program, the paired LSB page data can
> + * become corrupt. LSB page recovery read is a way to read LSB page though page
> + * data are corrupted. When uncorrectable error occurs as a result of LSB page
> + * read after power up, issue LSB page recovery read.
> + */
> +static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       int i;
> +
> +       /* Recovery is only for Flex-OneNAND */
> +       if (!FLEXONENAND(this))
> +               return status;
> +
> +       /* check if we failed due to uncorrectable error */
> +       if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
> +               return status;
> +
> +       /* check if address lies in MLC region */
> +       i = flexonenand_region(mtd, addr);
> +       if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
> +               return status;
> +
> +       /* We are attempting to reread, so decrement stats.failed
> +        * which was incremented by onenand_wait due to read failure
> +        */
> +       printk(KERN_INFO "onenand_recover_lsb: Attempting to recover from uncorrectable read\n");
> +       mtd->ecc_stats.failed--;
> +
> +       /* Issue the LSB page recovery command */
> +       this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
> +       return this->wait(mtd, FL_READING);
> +}
> +
> +/**
> + * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
> + * @param mtd          MTD device structure
> + * @param from         offset to read from
> + * @param ops:         oob operation description structure
> + *
> + * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
> + * So, read-while-load is not present.
> + */
> +static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
> +                               struct mtd_oob_ops *ops)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       struct mtd_ecc_stats stats;
> +       size_t len = ops->len;
> +       size_t ooblen = ops->ooblen;
> +       u_char *buf = ops->datbuf;
> +       u_char *oobbuf = ops->oobbuf;
> +       int read = 0, column, thislen;
> +       int oobread = 0, oobcolumn, thisooblen, oobsize;
> +       int ret = 0;
> +       int writesize = this->writesize;
> +
> +       DEBUG(MTD_DEBUG_LEVEL3, "onenand_mlc_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
> +
> +       if (ops->mode == MTD_OOB_AUTO)
> +               oobsize = this->ecclayout->oobavail;
> +       else
> +               oobsize = mtd->oobsize;
> +
> +       oobcolumn = from & (mtd->oobsize - 1);
> +
> +       /* Do not allow reads past end of device */
> +       if (from + len > mtd->size) {
> +               printk(KERN_ERR "onenand_mlc_read_ops_nolock: Attempt read beyond end of device\n");
> +               ops->retlen = 0;
> +               ops->oobretlen = 0;
> +               return -EINVAL;
> +       }
> +
> +       stats = mtd->ecc_stats;
> +
> +       while (read < len) {
> +               cond_resched();
> +
> +               thislen = min_t(int, writesize, len - read);
> +
> +               column = from & (writesize - 1);
> +               if (column + thislen > writesize)
> +                       thislen = writesize - column;
> +
> +               if (!onenand_check_bufferram(mtd, from)) {
> +                       this->command(mtd, ONENAND_CMD_READ, from, writesize);
> +
> +                       ret = this->wait(mtd, FL_READING);
> +                       if (unlikely(ret))
> +                               ret = onenand_recover_lsb(mtd, from, ret);
> +                       onenand_update_bufferram(mtd, from, !ret);
> +                       if (ret == -EBADMSG)
> +                               ret = 0;
> +               }
> +
> +               this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
> +               if (oobbuf) {
> +                       thisooblen = oobsize - oobcolumn;
> +                       thisooblen = min_t(int, thisooblen, ooblen - oobread);
> +
> +                       if (ops->mode == MTD_OOB_AUTO)
> +                               onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
> +                       else
> +                               this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
> +                       oobread += thisooblen;
> +                       oobbuf += thisooblen;
> +                       oobcolumn = 0;
> +               }
> +
> +               read += thislen;
> +               if (read == len)
> +                       break;
> +
> +               from += thislen;
> +               buf += thislen;
> +       }
> +
> +       /*
> +        * Return success, if no ECC failures, else -EBADMSG
> +        * fs driver will take care of that, because
> +        * retlen == desired len and result == -EBADMSG
> +        */
> +       ops->retlen = read;
> +       ops->oobretlen = oobread;
> +
> +       if (ret)
> +               return ret;
> +
> +       if (mtd->ecc_stats.failed - stats.failed)
> +               return -EBADMSG;
> +
> +       return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
> +}
> +
> +/**
>  * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
>  * @param mtd          MTD device structure
>  * @param from         offset to read from
> @@ -962,7 +1262,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
>        size_t len = ops->ooblen;
>        mtd_oob_mode_t mode = ops->mode;
>        u_char *buf = ops->oobbuf;
> -       int ret = 0;
> +       int ret = 0, readcmd;
>
>        from += ops->ooboffs;
>
> @@ -993,17 +1293,22 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
>
>        stats = mtd->ecc_stats;
>
> +       readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
> +
>        while (read < len) {
>                cond_resched();
>
>                thislen = oobsize - column;
>                thislen = min_t(int, thislen, len);
>
> -               this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
> +               this->command(mtd, readcmd, from, mtd->oobsize);
>
>                onenand_update_bufferram(mtd, from, 0);
>
>                ret = this->wait(mtd, FL_READING);
> +               if (unlikely(ret))
> +                       ret = onenand_recover_lsb(mtd, from, ret);
> +
>                if (ret && ret != -EBADMSG) {
>                        printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
>                        break;
> @@ -1053,6 +1358,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
>  static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
>        size_t *retlen, u_char *buf)
>  {
> +       struct onenand_chip *this = mtd->priv;
>        struct mtd_oob_ops ops = {
>                .len    = len,
>                .ooblen = 0,
> @@ -1062,7 +1368,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
>        int ret;
>
>        onenand_get_device(mtd, FL_READING);
> -       ret = onenand_read_ops_nolock(mtd, from, &ops);
> +       ret = ONENAND_IS_MLC(this) ?
> +               onenand_mlc_read_ops_nolock(mtd, from, &ops) :
> +               onenand_read_ops_nolock(mtd, from, &ops);
>        onenand_release_device(mtd);
>
>        *retlen = ops.retlen;
> @@ -1080,6 +1388,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
>  static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
>                            struct mtd_oob_ops *ops)
>  {
> +       struct onenand_chip *this = mtd->priv;
>        int ret;
>
>        switch (ops->mode) {
> @@ -1094,7 +1403,9 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
>
>        onenand_get_device(mtd, FL_READING);
>        if (ops->datbuf)
> -               ret = onenand_read_ops_nolock(mtd, from, ops);
> +               ret = ONENAND_IS_MLC(this) ?
> +                       onenand_mlc_read_ops_nolock(mtd, from, ops) :
> +                       onenand_read_ops_nolock(mtd, from, ops);
>        else
>                ret = onenand_read_oob_nolock(mtd, from, ops);
>        onenand_release_device(mtd);
> @@ -1128,11 +1439,11 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
>        ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
>
>        if (interrupt & ONENAND_INT_READ) {
> -               int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
> +               int ecc = onenand_read_ecc(this);
>                if (ecc & ONENAND_ECC_2BIT_ALL) {
>                        printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
>                                ", controller error 0x%04x\n", ecc, ctrl);
> -                       return ONENAND_BBT_READ_ERROR;
> +                       return ONENAND_BBT_READ_ECC_ERROR;
>                }
>        } else {
>                printk(KERN_ERR "onenand_bbt_wait: read timeout!"
> @@ -1163,7 +1474,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
>  {
>        struct onenand_chip *this = mtd->priv;
>        int read = 0, thislen, column;
> -       int ret = 0;
> +       int ret = 0, readcmd;
>        size_t len = ops->ooblen;
>        u_char *buf = ops->oobbuf;
>
> @@ -1183,17 +1494,22 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
>
>        column = from & (mtd->oobsize - 1);
>
> +       readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
> +
>        while (read < len) {
>                cond_resched();
>
>                thislen = mtd->oobsize - column;
>                thislen = min_t(int, thislen, len);
>
> -               this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
> +               this->command(mtd, readcmd, from, mtd->oobsize);
>
>                onenand_update_bufferram(mtd, from, 0);
>
>                ret = onenand_bbt_wait(mtd, FL_READING);
> +               if (unlikely(ret))
> +                       ret = onenand_recover_lsb(mtd, from, ret);
> +
>                if (ret)
>                        break;
>
> @@ -1230,9 +1546,11 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
>  {
>        struct onenand_chip *this = mtd->priv;
>        u_char *oob_buf = this->oob_buf;
> -       int status, i;
> +       int status, i, readcmd;
> +
> +       readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
>
> -       this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
> +       this->command(mtd, readcmd, to, mtd->oobsize);
>        onenand_update_bufferram(mtd, to, 0);
>        status = this->wait(mtd, FL_READING);
>        if (status)
> @@ -1633,7 +1951,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
>  {
>        struct onenand_chip *this = mtd->priv;
>        int column, ret = 0, oobsize;
> -       int written = 0;
> +       int written = 0, oobcmd;
>        u_char *oobbuf;
>        size_t len = ops->ooblen;
>        const u_char *buf = ops->oobbuf;
> @@ -1675,6 +1993,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
>
>        oobbuf = this->oob_buf;
>
> +       oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
> +
>        /* Loop until all data write */
>        while (written < len) {
>                int thislen = min_t(int, oobsize, len - written);
> @@ -1692,7 +2012,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
>                        memcpy(oobbuf + column, buf, thislen);
>                this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
>
> -               this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
> +               if (ONENAND_IS_MLC(this)) {
> +                       /* Set main area of DataRAM to 0xff*/
> +                       memset(this->page_buf, 0xff, mtd->writesize);
> +                       this->write_bufferram(mtd, ONENAND_DATARAM,
> +                                        this->page_buf, 0, mtd->writesize);
> +               }
> +
> +               this->command(mtd, oobcmd, to, mtd->oobsize);
>
>                onenand_update_bufferram(mtd, to, 0);
>                if (ONENAND_IS_2PLANE(this)) {
> @@ -1815,29 +2142,48 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
>  {
>        struct onenand_chip *this = mtd->priv;
>        unsigned int block_size;
> -       loff_t addr;
> -       int len;
> -       int ret = 0;
> +       loff_t addr = instr->addr;
> +       loff_t len = instr->len;
> +       int ret = 0, i;
> +       struct mtd_erase_region_info *region = NULL;
> +       loff_t region_end = 0;
>
>        DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%012llx, len = %llu\n", (unsigned long long) instr->addr, (unsigned long long) instr->len);
>
> -       block_size = (1 << this->erase_shift);
> -
> -       /* Start address must align on block boundary */
> -       if (unlikely(instr->addr & (block_size - 1))) {
> -               printk(KERN_ERR "onenand_erase: Unaligned address\n");
> +       /* Do not allow erase past end of device */
> +       if (unlikely((len + addr) > mtd->size)) {
> +               printk(KERN_ERR "onenand_erase: Erase past end of device\n");
>                return -EINVAL;
>        }
>
> -       /* Length must align on block boundary */
> -       if (unlikely(instr->len & (block_size - 1))) {
> -               printk(KERN_ERR "onenand_erase: Length not block aligned\n");
> -               return -EINVAL;
> +       if (FLEXONENAND(this)) {
> +               /* Find the eraseregion of this address */
> +               i = flexonenand_region(mtd, addr);
> +               region = &mtd->eraseregions[i];
> +
> +               block_size = region->erasesize;
> +               region_end = region->offset + region->erasesize * region->numblocks;
> +
> +               /* Start address within region must align on block boundary.
> +                * Erase region's start offset is always block start address.
> +                */
> +               if (unlikely((addr - region->offset) & (block_size - 1))) {
> +                       printk(KERN_ERR "onenand_erase: Unaligned address\n");
> +                       return -EINVAL;
> +               }
> +       } else {
> +               block_size = 1 << this->erase_shift;
> +
> +               /* Start address must align on block boundary */
> +               if (unlikely(addr & (block_size - 1))) {
> +                       printk(KERN_ERR "onenand_erase: Unaligned address\n");
> +                       return -EINVAL;
> +               }
>        }
>
> -       /* Do not allow erase past end of device */
> -       if (unlikely((instr->len + instr->addr) > mtd->size)) {
> -               printk(KERN_ERR "onenand_erase: Erase past end of device\n");
> +       /* Length must align on block boundary */
> +       if (unlikely(len & (block_size - 1))) {
> +               printk(KERN_ERR "onenand_erase: Length not block aligned\n");
>                return -EINVAL;
>        }
>
> @@ -1847,9 +2193,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
>        onenand_get_device(mtd, FL_ERASING);
>
>        /* Loop throught the pages */
> -       len = instr->len;
> -       addr = instr->addr;
> -
>        instr->state = MTD_ERASING;
>
>        while (len) {
> @@ -1869,7 +2212,8 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
>                ret = this->wait(mtd, FL_ERASING);
>                /* Check, if it is write protected */
>                if (ret) {
> -                       printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
> +                       printk(KERN_ERR "onenand_erase: Failed erase, block %d\n",
> +                                                onenand_block(this, addr));
>                        instr->state = MTD_ERASE_FAILED;
>                        instr->fail_addr = addr;
>                        goto erase_exit;
> @@ -1877,6 +2221,22 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
>
>                len -= block_size;
>                addr += block_size;
> +
> +               if (addr == region_end) {
> +                       if (!len)
> +                               break;
> +                       region++;
> +
> +                       block_size = region->erasesize;
> +                       region_end = region->offset + region->erasesize * region->numblocks;
> +
> +                       if (len & (block_size - 1)) {
> +                               /* FIXME: This should be handled at MTD partitioning level. */
> +                               printk(KERN_ERR "onenand_erase: Unaligned address\n");
> +                               goto erase_exit;
> +                       }
> +               }
> +
>        }
>
>        instr->state = MTD_ERASE_DONE;
> @@ -1955,13 +2315,17 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
>        int block;
>
>        /* Get block number */
> -       block = ((int) ofs) >> bbm->bbt_erase_shift;
> +       block = onenand_block(this, ofs);
>         if (bbm->bbt)
>                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
>
>         /* We write two bytes, so we dont have to mess with 16 bit access */
>         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
> -        return onenand_write_oob_nolock(mtd, ofs, &ops);
> +       /* FIXME : What to do when marking SLC block in partition
> +        *         with MLC erasesize? For now, it is not advisable to
> +        *         create partitions containing both SLC and MLC regions.
> +        */
> +       return onenand_write_oob_nolock(mtd, ofs, &ops);
>  }
>
>  /**
> @@ -2005,8 +2369,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
>        int start, end, block, value, status;
>        int wp_status_mask;
>
> -       start = ofs >> this->erase_shift;
> -       end = len >> this->erase_shift;
> +       start = onenand_block(this, ofs);
> +       end = onenand_block(this, ofs + len) - 1;
>
>        if (cmd == ONENAND_CMD_LOCK)
>                wp_status_mask = ONENAND_WP_LS;
> @@ -2018,7 +2382,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
>                /* Set start block address */
>                this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
>                /* Set end block address */
> -               this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
> +               this->write_word(end, this->base +  ONENAND_REG_END_BLOCK_ADDRESS);
>                /* Write lock command */
>                this->command(mtd, cmd, 0, 0);
>
> @@ -2039,7 +2403,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
>        }
>
>        /* Block lock scheme */
> -       for (block = start; block < start + end; block++) {
> +       for (block = start; block < end + 1; block++) {
>                /* Set block address */
>                value = onenand_block_address(this, block);
>                this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
> @@ -2147,7 +2511,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
>  {
>        struct onenand_chip *this = mtd->priv;
>        loff_t ofs = 0;
> -       size_t len = this->chipsize;
> +       loff_t len = mtd->size;
>
>        if (this->options & ONENAND_HAS_UNLOCK_ALL) {
>                /* Set start block address */
> @@ -2168,7 +2532,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
>                        return;
>
>                /* Workaround for all block unlock in DDP */
> -               if (ONENAND_IS_DDP(this)) {
> +               if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
>                        /* All blocks on another chip */
>                        ofs = this->chipsize >> 1;
>                        len = this->chipsize >> 1;
> @@ -2210,7 +2574,9 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
>        this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
>        this->wait(mtd, FL_OTPING);
>
> -       ret = onenand_read_ops_nolock(mtd, from, &ops);
> +       ret = ONENAND_IS_MLC(this) ?
> +               onenand_mlc_read_ops_nolock(mtd, from, &ops) :
> +               onenand_read_ops_nolock(mtd, from, &ops);
>
>        /* Exit OTP access mode */
>        this->command(mtd, ONENAND_CMD_RESET, 0, 0);
> @@ -2277,21 +2643,32 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
>                size_t *retlen, u_char *buf)
>  {
>        struct onenand_chip *this = mtd->priv;
> -       struct mtd_oob_ops ops = {
> -               .mode = MTD_OOB_PLACE,
> -               .ooblen = len,
> -               .oobbuf = buf,
> -               .ooboffs = 0,
> -       };
> +       struct mtd_oob_ops ops;
>        int ret;
>
>        /* Enter OTP access mode */
>        this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
>        this->wait(mtd, FL_OTPING);
>
> -       ret = onenand_write_oob_nolock(mtd, from, &ops);
> -
> -       *retlen = ops.oobretlen;
> +       if (FLEXONENAND(this)) {
> +               /*
> +                * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
> +                * main area of page 49.
> +                */
> +               ops.len = mtd->writesize;
> +               ops.ooblen = 0;
> +               ops.datbuf = buf;
> +               ops.oobbuf = NULL;
> +               ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
> +               *retlen = ops.retlen;
> +       } else {
> +               ops.mode = MTD_OOB_PLACE;
> +               ops.ooblen = len;
> +               ops.oobbuf = buf;
> +               ops.ooboffs = 0;
> +               ret = onenand_write_oob_nolock(mtd, from, &ops);
> +               *retlen = ops.oobretlen;
> +       }
>
>        /* Exit OTP access mode */
>        this->command(mtd, ONENAND_CMD_RESET, 0, 0);
> @@ -2475,27 +2852,34 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
>                        size_t len)
>  {
>        struct onenand_chip *this = mtd->priv;
> -       u_char *oob_buf = this->oob_buf;
> +       u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
>        size_t retlen;
>        int ret;
>
> -       memset(oob_buf, 0xff, mtd->oobsize);
> +       memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
> +                                                : mtd->oobsize);
>        /*
>         * Note: OTP lock operation
>         *       OTP block : 0xXXFC
>         *       1st block : 0xXXF3 (If chip support)
>         *       Both      : 0xXXF0 (If chip support)
>         */
> -       oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
> +       if (FLEXONENAND(this))
> +               buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC;
> +       else
> +               buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
>
>        /*
>         * Write lock mark to 8th word of sector0 of page0 of the spare0.
>         * We write 16 bytes spare area instead of 2 bytes.
> +        * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
> +        * main area of page 49.
>         */
> +
>        from = 0;
> -       len = 16;
> +       len = FLEXONENAND(this) ? mtd->writesize : 16;
>
> -       ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER);
> +       ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
>
>        return ret ? : retlen;
>  }
> @@ -2542,6 +2926,14 @@ static void onenand_check_features(struct mtd_info *mtd)
>                break;
>        }
>
> +       if (ONENAND_IS_MLC(this))
> +               this->options &= ~ONENAND_HAS_2PLANE;
> +
> +       if (FLEXONENAND(this)) {
> +               this->options &= ~ONENAND_HAS_CONT_LOCK;
> +               this->options |= ONENAND_HAS_UNLOCK_ALL;
> +       }
> +
>        if (this->options & ONENAND_HAS_CONT_LOCK)
>                printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
>        if (this->options & ONENAND_HAS_UNLOCK_ALL)
> @@ -2559,14 +2951,16 @@ static void onenand_check_features(struct mtd_info *mtd)
>  */
>  static void onenand_print_device_info(int device, int version)
>  {
> -        int vcc, demuxed, ddp, density;
> +       int vcc, demuxed, ddp, density, flexonenand;
>
>         vcc = device & ONENAND_DEVICE_VCC_MASK;
>         demuxed = device & ONENAND_DEVICE_IS_DEMUX;
>         ddp = device & ONENAND_DEVICE_IS_DDP;
>         density = onenand_get_density(device);
> -        printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
> -                demuxed ? "" : "Muxed ",
> +       flexonenand = device & DEVICE_IS_FLEXONENAND;
> +       printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
> +               demuxed ? "" : "Muxed ",
> +               flexonenand ? "Flex-" : "",
>                 ddp ? "(DDP)" : "",
>                 (16 << density),
>                 vcc ? "2.65/3.3" : "1.8",
> @@ -2606,6 +3000,280 @@ static int onenand_check_maf(int manuf)
>  }
>
>  /**
> +* flexonenand_get_boundary     - Reads the SLC boundary
> +* @param onenand_info          - onenand info structure
> +**/
> +static int flexonenand_get_boundary(struct mtd_info *mtd)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       unsigned die, bdry;
> +       int ret, syscfg, locked;
> +
> +       /* Disable ECC */
> +       syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
> +       this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
> +
> +       for (die = 0; die < this->dies; die++) {
> +               this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
> +               this->wait(mtd, FL_SYNCING);
> +
> +               this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
> +               ret = this->wait(mtd, FL_READING);
> +
> +               bdry = this->read_word(this->base + ONENAND_DATARAM);
> +               if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
> +                       locked = 0;
> +               else
> +                       locked = 1;
> +               this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
> +
> +               this->command(mtd, ONENAND_CMD_RESET, 0, 0);
> +               ret = this->wait(mtd, FL_RESETING);
> +
> +               printk(KERN_INFO "Die %d boundary: %d%s\n", die,
> +                      this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
> +       }
> +
> +       /* Enable ECC */
> +       this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
> +       return 0;
> +}
> +
> +/**
> + * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
> + *                       boundary[], diesize[], mtd->size, mtd->erasesize
> + * @param mtd          - MTD device structure
> + */
> +static void flexonenand_get_size(struct mtd_info *mtd)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       int die, i, eraseshift, density;
> +       int blksperdie, maxbdry;
> +       loff_t ofs;
> +
> +       density = onenand_get_density(this->device_id);
> +       blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
> +       blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
> +       maxbdry = blksperdie - 1;
> +       eraseshift = this->erase_shift - 1;
> +
> +       mtd->numeraseregions = this->dies << 1;
> +
> +       /* This fills up the device boundary */
> +       flexonenand_get_boundary(mtd);
> +       die = ofs = 0;
> +       i = -1;
> +       for (; die < this->dies; die++) {
> +               if (!die || this->boundary[die-1] != maxbdry) {
> +                       i++;
> +                       mtd->eraseregions[i].offset = ofs;
> +                       mtd->eraseregions[i].erasesize = 1 << eraseshift;
> +                       mtd->eraseregions[i].numblocks =
> +                                                       this->boundary[die] + 1;
> +                       ofs += mtd->eraseregions[i].numblocks << eraseshift;
> +                       eraseshift++;
> +               } else {
> +                       mtd->numeraseregions -= 1;
> +                       mtd->eraseregions[i].numblocks +=
> +                                                       this->boundary[die] + 1;
> +                       ofs += (this->boundary[die] + 1) << (eraseshift - 1);
> +               }
> +               if (this->boundary[die] != maxbdry) {
> +                       i++;
> +                       mtd->eraseregions[i].offset = ofs;
> +                       mtd->eraseregions[i].erasesize = 1 << eraseshift;
> +                       mtd->eraseregions[i].numblocks = maxbdry ^
> +                                                        this->boundary[die];
> +                       ofs += mtd->eraseregions[i].numblocks << eraseshift;
> +                       eraseshift--;
> +               } else
> +                       mtd->numeraseregions -= 1;
> +       }
> +
> +       /* Expose MLC erase size except when all blocks are SLC */
> +       mtd->erasesize = 1 << this->erase_shift;
> +       if (mtd->numeraseregions == 1)
> +               mtd->erasesize >>= 1;
> +
> +       printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
> +       for (i = 0; i < mtd->numeraseregions; i++)
> +               printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
> +                       " numblocks: %04u]\n",
> +                       (unsigned int) mtd->eraseregions[i].offset,
> +                       mtd->eraseregions[i].erasesize,
> +                       mtd->eraseregions[i].numblocks);
> +
> +       for (die = 0, mtd->size = 0; die < this->dies; die++) {
> +               this->diesize[die] = (loff_t)blksperdie << this->erase_shift;
> +               this->diesize[die] -= (loff_t)(this->boundary[die] + 1)
> +                                                << (this->erase_shift - 1);
> +               mtd->size += this->diesize[die];
> +       }
> +}
> +
> +/**
> + * flexonenand_check_blocks_erased - Check if blocks are erased
> + * @param mtd_info     - mtd info structure
> + * @param start                - first erase block to check
> + * @param end          - last erase block to check
> + *
> + * Converting an unerased block from MLC to SLC
> + * causes byte values to change. Since both data and its ECC
> + * have changed, reads on the block give uncorrectable error.
> + * This might lead to the block being detected as bad.
> + *
> + * Avoid this by ensuring that the block to be converted is
> + * erased.
> + */
> +static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       int i, ret;
> +       int block;
> +       struct mtd_oob_ops ops = {
> +               .mode = MTD_OOB_PLACE,
> +               .ooboffs = 0,
> +               .ooblen = mtd->oobsize,
> +               .datbuf = NULL,
> +               .oobbuf = this->oob_buf,
> +       };
> +       loff_t addr;
> +
> +       printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
> +
> +       for (block = start; block <= end; block++) {
> +               addr = flexonenand_addr(this, block);
> +               if (onenand_block_isbad_nolock(mtd, addr, 0))
> +                       continue;
> +
> +               /*
> +                * Since main area write results in ECC write to spare,
> +                * it is sufficient to check only ECC bytes for change.
> +                */
> +               ret = onenand_read_oob_nolock(mtd, addr, &ops);
> +               if (ret)
> +                       return ret;
> +
> +               for (i = 0; i < mtd->oobsize; i++)
> +                       if (this->oob_buf[i] != 0xff)
> +                               break;
> +
> +               if (i != mtd->oobsize) {
> +                       printk(KERN_WARNING "Block %d not erased.\n", block);
> +                       return 1;
> +               }
> +       }
> +
> +       return 0;
> +}
> +
> +/**
> + * flexonenand_set_boundary    - Writes the SLC boundary
> + * @param mtd                  - mtd info structure
> + */
> +int flexonenand_set_boundary(struct mtd_info *mtd, int die,
> +                                   int boundary, int lock)
> +{
> +       struct onenand_chip *this = mtd->priv;
> +       int ret, density, blksperdie, old, new, thisboundary;
> +       loff_t addr;
> +
> +       /* Change only once for SDP Flex-OneNAND */
> +       if (die && (!ONENAND_IS_DDP(this)))
> +               return 0;
> +
> +       /* boundary value of -1 indicates no required change */
> +       if (boundary < 0 || boundary == this->boundary[die])
> +               return 0;
> +
> +       density = onenand_get_density(this->device_id);
> +       blksperdie = ((16 << density) << 20) >> this->erase_shift;
> +       blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
> +
> +       if (boundary >= blksperdie) {
> +               printk(KERN_ERR "flexonenand_set_boundary: Invalid boundary value. "
> +                               "Boundary not changed.\n");
> +               return -EINVAL;
> +       }
> +
> +       /* Check if converting blocks are erased */
> +       old = this->boundary[die] + (die * this->density_mask);
> +       new = boundary + (die * this->density_mask);
> +       ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
> +       if (ret) {
> +               printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
> +               return ret;
> +       }
> +
> +       this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
> +       this->wait(mtd, FL_SYNCING);
> +
> +       /* Check is boundary is locked */
> +       this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
> +       ret = this->wait(mtd, FL_READING);
> +
> +       thisboundary = this->read_word(this->base + ONENAND_DATARAM);
> +       if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
> +               printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
> +               ret = 1;
> +               goto out;
> +       }
> +
> +       printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
> +                       die, boundary, lock ? "(Locked)" : "(Unlocked)");
> +
> +       addr = die ? this->diesize[0] : 0;
> +
> +       boundary &= FLEXONENAND_PI_MASK;
> +       boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
> +
> +       this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
> +       ret = this->wait(mtd, FL_ERASING);
> +       if (ret) {
> +               printk(KERN_ERR "flexonenand_set_boundary: Failed PI erase for Die %d\n", die);
> +               goto out;
> +       }
> +
> +       this->write_word(boundary, this->base + ONENAND_DATARAM);
> +       this->command(mtd, ONENAND_CMD_PROG, addr, 0);
> +       ret = this->wait(mtd, FL_WRITING);
> +       if (ret) {
> +               printk(KERN_ERR "flexonenand_set_boundary: Failed PI write for Die %d\n", die);
> +               goto out;
> +       }
> +
> +       this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
> +       ret = this->wait(mtd, FL_WRITING);
> +out:
> +       this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
> +       this->wait(mtd, FL_RESETING);
> +       if (!ret)
> +               /* Recalculate device size on boundary change*/
> +               flexonenand_get_size(mtd);
> +
> +       return ret;
> +}
> +
> +/**
> + * flexonenand_setup -         capture Flex-OneNAND boundary and lock
> + *                     values  passed as kernel parameters
> + * @param s    kernel parameter string
> + */
> +static int flexonenand_setup(char *s)
> +{
> +       int ints[5], i;
> +
> +       s = get_options(s, 5, ints);
> +
> +       for (i = 0; i < ints[0]; i++)
> +               flex_bdry[i] = ints[i + 1];
> +
> +       return 1;
> +}
> +
> +__setup("onenand.bdry=", flexonenand_setup);
> +
> +/**
>  * onenand_probe - [OneNAND Interface] Probe the OneNAND device
>  * @param mtd          MTD device structure
>  *
> @@ -2647,6 +3315,7 @@ static int onenand_probe(struct mtd_info *mtd)
>        maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
>        dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
>        ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
> +       this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
>
>        /* Check OneNAND device */
>        if (maf_id != bram_maf_id || dev_id != bram_dev_id)
> @@ -2658,29 +3327,55 @@ static int onenand_probe(struct mtd_info *mtd)
>        this->version_id = ver_id;
>
>        density = onenand_get_density(dev_id);
> +       if (FLEXONENAND(this)) {
> +               this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
> +               /* Maximum possible erase regions */
> +               mtd->numeraseregions = this->dies << 1;
> +               mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
> +                                       * (this->dies << 1), GFP_KERNEL);
> +               if (!mtd->eraseregions)
> +                       return -ENOMEM;
> +       }
> +
> +       /*
> +        * For Flex-OneNAND, chipsize represents maximum possible device size.
> +        * mtd->size represents the actual device size.
> +        */
>        this->chipsize = (16 << density) << 20;
> -       /* Set density mask. it is used for DDP */
> -       if (ONENAND_IS_DDP(this))
> -               this->density_mask = (1 << (density + 6));
> -       else
> -               this->density_mask = 0;
>
>        /* OneNAND page size & block size */
>        /* The data buffer size is equal to page size */
>        mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
> +       /* We use the full BufferRAM */
> +       if (ONENAND_IS_MLC(this))
> +               mtd->writesize <<= 1;
> +
>        mtd->oobsize = mtd->writesize >> 5;
>        /* Pages per a block are always 64 in OneNAND */
>        mtd->erasesize = mtd->writesize << 6;
> +       /*
> +        * Flex-OneNAND SLC area has 64 pages per block.
> +        * Flex-OneNAND MLC area has 128 pages per block.
> +        * Expose MLC erase size to find erase_shift and page_mask.
> +        */
> +       if (FLEXONENAND(this))
> +               mtd->erasesize <<= 1;
>
>        this->erase_shift = ffs(mtd->erasesize) - 1;
>        this->page_shift = ffs(mtd->writesize) - 1;
>        this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
> +       /* Set density mask. it is used for DDP */
> +       if (ONENAND_IS_DDP(this))
> +               this->density_mask = this->chipsize >> (this->erase_shift + 1);
>        /* It's real page size */
>        this->writesize = mtd->writesize;
>
>        /* REVIST: Multichip handling */
>
> -       mtd->size = this->chipsize;
> +       if (FLEXONENAND(this))
> +               flexonenand_get_size(mtd);
> +       else
> +               mtd->size = this->chipsize;
>
>        /* Check OneNAND features */
>        onenand_check_features(mtd);
> @@ -2735,7 +3430,7 @@ static void onenand_resume(struct mtd_info *mtd)
>  */
>  int onenand_scan(struct mtd_info *mtd, int maxchips)
>  {
> -       int i;
> +       int i, ret;
>        struct onenand_chip *this = mtd->priv;
>
>        if (!this->read_word)
> @@ -2797,6 +3492,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
>         * Allow subpage writes up to oobsize.
>         */
>        switch (mtd->oobsize) {
> +       case 128:
> +               this->ecclayout = &onenand_oob_128;
> +               mtd->subpage_sft = 0;
> +               break;
>        case 64:
>                this->ecclayout = &onenand_oob_64;
>                mtd->subpage_sft = 2;
> @@ -2862,7 +3561,16 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
>        /* Unlock whole block */
>        onenand_unlock_all(mtd);
>
> -       return this->scan_bbt(mtd);
> +       ret = this->scan_bbt(mtd);
> +       if ((!FLEXONENAND(this)) || ret)
> +               return ret;
> +
> +       /* Change Flex-OneNAND boundaries if required */
> +       for (i = 0; i < MAX_DIES; i++)
> +               flexonenand_set_boundary(mtd, i, flex_bdry[2 * i],
> +                                                flex_bdry[(2 * i) + 1]);
> +
> +       return 0;
>  }
>
>  /**
> @@ -2891,6 +3599,7 @@ void onenand_release(struct mtd_info *mtd)
>                kfree(this->page_buf);
>        if (this->options & ONENAND_OOBBUF_ALLOC)
>                kfree(this->oob_buf);
> +       kfree(mtd->eraseregions);
>  }
>
>  EXPORT_SYMBOL_GPL(onenand_scan);
> diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
> index 2f53b51..a91fcac 100644
> --- a/drivers/mtd/onenand/onenand_bbt.c
> +++ b/drivers/mtd/onenand/onenand_bbt.c
> @@ -63,6 +63,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
>        loff_t from;
>        size_t readlen, ooblen;
>        struct mtd_oob_ops ops;
> +       int rgn;
>
>        printk(KERN_INFO "Scanning device for bad blocks\n");
>
> @@ -76,7 +77,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
>        /* Note that numblocks is 2 * (real numblocks) here;
>         * see i += 2 below as it makses shifting and masking less painful
>         */
> -       numblocks = mtd->size >> (bbm->bbt_erase_shift - 1);
> +       numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1);
>        startblock = 0;
>        from = 0;
>
> @@ -106,7 +107,12 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
>                        }
>                }
>                i += 2;
> -               from += (1 << bbm->bbt_erase_shift);
> +
> +               if (FLEXONENAND(this)) {
> +                       rgn = flexonenand_region(mtd, from);
> +                       from += mtd->eraseregions[rgn].erasesize;
> +               } else
> +                       from += (1 << bbm->bbt_erase_shift);
>        }
>
>        return 0;
> @@ -143,7 +149,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
>        uint8_t res;
>
>        /* Get block number * 2 */
> -       block = (int) (offs >> (bbm->bbt_erase_shift - 1));
> +       block = (int) (onenand_block(this, offs) << 1);
>        res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
>
>        DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
> @@ -178,7 +184,7 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
>        struct bbm_info *bbm = this->bbm;
>        int len, ret = 0;
>
> -       len = mtd->size >> (this->erase_shift + 2);
> +       len = this->chipsize >> (this->erase_shift + 2);
>        /* Allocate memory (2bit per block) and clear the memory bad block table */
>        bbm->bbt = kzalloc(len, GFP_KERNEL);
>        if (!bbm->bbt) {
> diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
> index d64200b..f6e3c8a 100644
> --- a/drivers/mtd/onenand/onenand_sim.c
> +++ b/drivers/mtd/onenand/onenand_sim.c
> @@ -6,6 +6,10 @@
>  *  Copyright © 2005-2007 Samsung Electronics
>  *  Kyungmin Park <kyungmin.park at samsung.com>
>  *
> + *  Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
> + *  Flex-OneNAND simulator support
> + *  Copyright (C) Samsung Electronics, 2008
> + *
>  * This program is free software; you can redistribute it and/or modify
>  * it under the terms of the GNU General Public License version 2 as
>  * published by the Free Software Foundation.
> @@ -24,16 +28,38 @@
>  #ifndef CONFIG_ONENAND_SIM_MANUFACTURER
>  #define CONFIG_ONENAND_SIM_MANUFACTURER         0xec
>  #endif
> +
>  #ifndef CONFIG_ONENAND_SIM_DEVICE_ID
>  #define CONFIG_ONENAND_SIM_DEVICE_ID            0x04
>  #endif
> +
> +#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
> +
>  #ifndef CONFIG_ONENAND_SIM_VERSION_ID
>  #define CONFIG_ONENAND_SIM_VERSION_ID           0x1e
>  #endif
>
> +#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
> +#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
> +#endif
> +
> +/* Initial boundary values for Flex-OneNAND Simulator */
> +#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
> +#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY   0x01
> +#endif
> +
> +#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
> +#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY   0x01
> +#endif
> +
>  static int manuf_id    = CONFIG_ONENAND_SIM_MANUFACTURER;
>  static int device_id   = CONFIG_ONENAND_SIM_DEVICE_ID;
>  static int version_id  = CONFIG_ONENAND_SIM_VERSION_ID;
> +static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
> +static int boundary[] = {
> +       CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
> +       CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
> +};
>
>  struct onenand_flash {
>        void __iomem *base;
> @@ -57,12 +83,18 @@ struct onenand_flash {
>        (writew(v, this->base + ONENAND_REG_WP_STATUS))
>
>  /* It has all 0xff chars */
> -#define MAX_ONENAND_PAGESIZE           (2048 + 64)
> +#define MAX_ONENAND_PAGESIZE           (4096 + 128)
>  static unsigned char *ffchars;
>
> +#if CONFIG_FLEXONENAND
> +#define PARTITION_NAME "Flex-OneNAND simulator partition"
> +#else
> +#define PARTITION_NAME "OneNAND simulator partition"
> +#endif
> +
>  static struct mtd_partition os_partitions[] = {
>        {
> -               .name           = "OneNAND simulator partition",
> +               .name           = PARTITION_NAME,
>                .offset         = 0,
>                .size           = MTDPART_SIZ_FULL,
>        },
> @@ -104,6 +136,7 @@ static void onenand_lock_handle(struct onenand_chip *this, int cmd)
>
>        switch (cmd) {
>        case ONENAND_CMD_UNLOCK:
> +       case ONENAND_CMD_UNLOCK_ALL:
>                if (block_lock_scheme)
>                        ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
>                else
> @@ -228,10 +261,12 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
>  {
>        struct mtd_info *mtd = &info->mtd;
>        struct onenand_flash *flash = this->priv;
> -       int main_offset, spare_offset;
> +       int main_offset, spare_offset, die = 0;
>        void __iomem *src;
>        void __iomem *dest;
>        unsigned int i;
> +       static int pi_operation;
> +       int erasesize, rgn;
>
>        if (dataram) {
>                main_offset = mtd->writesize;
> @@ -241,10 +276,27 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
>                spare_offset = 0;
>        }
>
> +       if (pi_operation) {
> +               die = readw(this->base + ONENAND_REG_START_ADDRESS2);
> +               die >>= ONENAND_DDP_SHIFT;
> +       }
> +
>        switch (cmd) {
> +       case FLEXONENAND_CMD_PI_ACCESS:
> +               pi_operation = 1;
> +               break;
> +
> +       case ONENAND_CMD_RESET:
> +               pi_operation = 0;
> +               break;
> +
>        case ONENAND_CMD_READ:
>                src = ONENAND_CORE(flash) + offset;
>                dest = ONENAND_MAIN_AREA(this, main_offset);
> +               if (pi_operation) {
> +                       writew(boundary[die], this->base + ONENAND_DATARAM);
> +                       break;
> +               }
>                memcpy(dest, src, mtd->writesize);
>                /* Fall through */
>
> @@ -257,6 +309,10 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
>        case ONENAND_CMD_PROG:
>                src = ONENAND_MAIN_AREA(this, main_offset);
>                dest = ONENAND_CORE(flash) + offset;
> +               if (pi_operation) {
> +                       boundary[die] = readw(this->base + ONENAND_DATARAM);
> +                       break;
> +               }
>                /* To handle partial write */
>                for (i = 0; i < (1 << mtd->subpage_sft); i++) {
>                        int off = i * this->subpagesize;
> @@ -284,9 +340,18 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
>                break;
>
>        case ONENAND_CMD_ERASE:
> -               memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
> +               if (pi_operation)
> +                       break;
> +
> +               if (FLEXONENAND(this)) {
> +                       rgn = flexonenand_region(mtd, offset);
> +                       erasesize = mtd->eraseregions[rgn].erasesize;
> +               } else
> +                       erasesize = mtd->erasesize;
> +
> +               memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
>                memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
> -                      (mtd->erasesize >> 5));
> +                      (erasesize >> 5));
>                break;
>
>        default:
> @@ -339,7 +404,7 @@ static void onenand_command_handle(struct onenand_chip *this, int cmd)
>        }
>
>        if (block != -1)
> -               offset += block << this->erase_shift;
> +               offset = onenand_addr(this, block);
>
>        if (page != -1)
>                offset += page << this->page_shift;
> @@ -390,6 +455,7 @@ static int __init flash_init(struct onenand_flash *flash)
>        }
>
>        density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
> +       density &= ONENAND_DEVICE_DENSITY_MASK;
>        size = ((16 << 20) << density);
>
>        ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
> @@ -405,8 +471,9 @@ static int __init flash_init(struct onenand_flash *flash)
>        writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
>        writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
>        writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
> +       writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
>
> -       if (density < 2)
> +       if (density < 2 && (!CONFIG_FLEXONENAND))
>                buffer_size = 0x0400;   /* 1KiB page */
>        else
>                buffer_size = 0x0800;   /* 2KiB page */
> diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
> index 0fa3ac4..9aab82c 100644
> --- a/include/linux/mtd/onenand.h
> +++ b/include/linux/mtd/onenand.h
> @@ -17,6 +17,7 @@
>  #include <linux/mtd/onenand_regs.h>
>  #include <linux/mtd/bbm.h>
>
> +#define MAX_DIES               2
>  #define MAX_BUFFERRAM          2
>
>  /* Scan and identify a OneNAND device */
> @@ -51,7 +52,12 @@ struct onenand_bufferram {
>  /**
>  * struct onenand_chip - OneNAND Private Flash Chip Data
>  * @base:              [BOARDSPECIFIC] address to access OneNAND
> + * @dies:              [INTERN][FLEX-ONENAND] number of dies on chip
> + * @boundary:          [INTERN][FLEX-ONENAND] Boundary of the dies
> + * @diesize:           [INTERN][FLEX-ONENAND] Size of the dies
>  * @chipsize:          [INTERN] the size of one chip for multichip arrays
> + *                     FIXME For Flex-OneNAND, chipsize holds maximum possible
> + *                     device size ie when all blocks are considered MLC
>  * @device_id:         [INTERN] device ID
>  * @density_mask:      chip density, used for DDP devices
>  * @verstion_id:       [INTERN] version ID
> @@ -92,9 +98,13 @@ struct onenand_bufferram {
>  */
>  struct onenand_chip {
>        void __iomem            *base;
> +       unsigned                dies;
> +       unsigned                boundary[MAX_DIES];
> +       loff_t                  diesize[MAX_DIES];
>        unsigned int            chipsize;
>        unsigned int            device_id;
>        unsigned int            version_id;
> +       unsigned int            technology;
>        unsigned int            density_mask;
>        unsigned int            options;
>
> @@ -145,6 +155,8 @@ struct onenand_chip {
>  #define ONENAND_SET_BUFFERRAM0(this)           (this->bufferram_index = 0)
>  #define ONENAND_SET_BUFFERRAM1(this)           (this->bufferram_index = 1)
>
> +#define FLEXONENAND(this)                                              \
> +       (this->device_id & DEVICE_IS_FLEXONENAND)
>  #define ONENAND_GET_SYS_CFG1(this)                                     \
>        (this->read_word(this->base + ONENAND_REG_SYS_CFG1))
>  #define ONENAND_SET_SYS_CFG1(v, this)                                  \
> @@ -153,6 +165,9 @@ struct onenand_chip {
>  #define ONENAND_IS_DDP(this)                                           \
>        (this->device_id & ONENAND_DEVICE_IS_DDP)
>
> +#define ONENAND_IS_MLC(this)                                           \
> +       (this->technology & ONENAND_TECHNOLOGY_IS_MLC)
> +
>  #ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
>  #define ONENAND_IS_2PLANE(this)                                                \
>        (this->options & ONENAND_HAS_2PLANE)
> @@ -190,5 +205,8 @@ struct onenand_manufacturers {
>
>  int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
>                         struct mtd_oob_ops *ops);
> +unsigned onenand_block(struct onenand_chip *this, loff_t addr);
> +loff_t onenand_addr(struct onenand_chip *this, int block);
> +int flexonenand_region(struct mtd_info *mtd, loff_t addr);
>
>  #endif /* __LINUX_MTD_ONENAND_H */
> diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
> index 0c6bbe2..86a6bbe 100644
> --- a/include/linux/mtd/onenand_regs.h
> +++ b/include/linux/mtd/onenand_regs.h
> @@ -67,6 +67,9 @@
>  /*
>  * Device ID Register F001h (R)
>  */
> +#define DEVICE_IS_FLEXONENAND          (1 << 9)
> +#define FLEXONENAND_PI_MASK            (0x3ff)
> +#define FLEXONENAND_PI_UNLOCK_SHIFT    (14)
>  #define ONENAND_DEVICE_DENSITY_MASK    (0xf)
>  #define ONENAND_DEVICE_DENSITY_SHIFT   (4)
>  #define ONENAND_DEVICE_IS_DDP          (1 << 3)
> @@ -84,6 +87,11 @@
>  #define ONENAND_VERSION_PROCESS_SHIFT  (8)
>
>  /*
> + * Technology Register F006h (R)
> + */
> +#define ONENAND_TECHNOLOGY_IS_MLC      (1 << 0)
> +
> +/*
>  * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
>  */
>  #define ONENAND_DDP_SHIFT              (15)
> @@ -93,7 +101,8 @@
>  /*
>  * Start Address 8 F107h (R/W)
>  */
> -#define ONENAND_FPA_MASK               (0x3f)
> +/* Note: It's actually 0x3f in case of SLC */
> +#define ONENAND_FPA_MASK               (0x7f)
>  #define ONENAND_FPA_SHIFT              (2)
>  #define ONENAND_FSA_MASK               (0x03)
>
> @@ -105,7 +114,8 @@
>  #define ONENAND_BSA_BOOTRAM            (0 << 2)
>  #define ONENAND_BSA_DATARAM0           (2 << 2)
>  #define ONENAND_BSA_DATARAM1           (3 << 2)
> -#define ONENAND_BSC_MASK               (0x03)
> +/* Note: It's actually 0x03 in case of SLC */
> +#define ONENAND_BSC_MASK               (0x07)
>
>  /*
>  * Command Register F220h (R/W)
> @@ -124,9 +134,13 @@
>  #define ONENAND_CMD_RESET              (0xF0)
>  #define ONENAND_CMD_OTP_ACCESS         (0x65)
>  #define ONENAND_CMD_READID             (0x90)
> +#define FLEXONENAND_CMD_PI_UPDATE      (0x05)
> +#define FLEXONENAND_CMD_PI_ACCESS      (0x66)
> +#define FLEXONENAND_CMD_RECOVER_LSB    (0x05)
>
>  /* NOTE: Those are not *REAL* commands */
>  #define ONENAND_CMD_BUFFERRAM          (0x1978)
> +#define FLEXONENAND_CMD_READ_PI                (0x1985)
>
>  /*
>  * System Configuration 1 Register F221h (R, R/W)
> @@ -192,10 +206,12 @@
>  #define ONENAND_ECC_1BIT_ALL           (0x5555)
>  #define ONENAND_ECC_2BIT               (1 << 1)
>  #define ONENAND_ECC_2BIT_ALL           (0xAAAA)
> +#define FLEXONENAND_UNCORRECTABLE_ERROR        (0x1010)
>
>  /*
>  * One-Time Programmable (OTP)
>  */
> +#define FLEXONENAND_OTP_LOCK_OFFSET            (2048)
>  #define ONENAND_OTP_LOCK_OFFSET                (14)
>
>  #endif /* __ONENAND_REG_H */
>
> __________________________________________________________
> Linux-MTD CVS commit list
> http://lists.infradead.org/mailman/listinfo/linux-mtd-cvs/
>



More information about the linux-mtd mailing list