[PATCH] 3/3 ubi notification API (was Re: [PATCH] [UBI] [1/3] ubi notifications API)
Artem Bityutskiy
dedekind at infradead.org
Mon Jun 1 12:48:45 EDT 2009
On Sun, 2009-05-31 at 18:32 +0400, dmitry pervushin wrote:
> On Sun, 2009-05-31 at 16:52 +0300, Artem Bityutskiy wrote:
> > On Fri, 2009-05-29 at 23:27 +0400, dmitry pervushin wrote:
> > > > I've also created an "experimental" branch in the ubi-2.6.git
> > > > tree for your convenience:
> > > >
> > > > http://git.infradead.org/ubi-2.6.git?a=shortlog;h=refs/heads/experimental
> > > > git://git.infradead.org/ubi-2.6.git experimental
> > > Sorry for late response; I reviewed your changes, and although
> > > prohibiting of using ubi api from within notifiers does not look very
> > > amazing to me... but it seems that it is the only robust way. The 3rd
> > > patch from the serie is inlined below (tested on the stmp378x board as
> > > well as on nandsim)
> > >
> > > The standalone gluebi support that uses UBI notifications.
> > >
> > > Signed-off-by: Dmitry Pervushin <dpervushin at embeddedalley.com>
> >
> > Just applied this to
> > git://git.infradead.org/ubi-2.6.git experimental
> >
> > and got:
> >
> Oh, shame on me. I attached the patch with the same name from the wrong
> directory; below is the correct one.
>
> Signed-off-by: dmitry pervushin <dpervushin at embeddedalley.com>
>
I've re-worked your patch. I make it release resources when the module
is unloaded, made it do proper module referencing, made it really
independent on UBI, tested it with the UBI test-suite which can be
found in ubi-2.6.git/tests/ubi-tests, re-named most of the
funcs/variables to get rid of the "ubi" word and make names consistent.
Patch is below as well as at the same "experimental" branch. If you
are OK with this, I'll push it forward.
>From 855ef5c35df22a056fd6f76f0785726a64a664fa Mon Sep 17 00:00:00 2001
From: Dmitry Pervushin <dpervushin at embeddedalley.com>
Date: Sun, 31 May 2009 18:32:59 +0400
Subject: [PATCH] UBI: make gluebi a separate module
Signed-off-by: Dmitry Pervushin <dpervushin at embeddedalley.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
---
drivers/mtd/ubi/Kconfig | 13 +-
drivers/mtd/ubi/Makefile | 2 +-
drivers/mtd/ubi/gluebi.c | 375 +++++++++++++++++++++++++++++++++++-----------
3 files changed, 292 insertions(+), 98 deletions(-)
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..b1cd7a1 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -49,15 +49,16 @@ config MTD_UBI_BEB_RESERVE
reserved. Leave the default value if unsure.
config MTD_UBI_GLUEBI
- bool "Emulate MTD devices"
+ tristate "MTD devices emulation driver (gluebi)"
default n
depends on MTD_UBI
help
- This option enables MTD devices emulation on top of UBI volumes: for
- each UBI volumes an MTD device is created, and all I/O to this MTD
- device is redirected to the UBI volume. This is handy to make
- MTD-oriented software (like JFFS2) work on top of UBI. Do not enable
- this if no legacy software will be used.
+ This option enables gluebi - an additional driver which emulates MTD
+ devices on top of UBI volumes: for each UBI volumes an MTD device is
+ created, and all I/O to this MTD device is redirected to the UBI
+ volume. This is handy to make MTD-oriented software (like JFFS2)
+ work on top of UBI. Do not enable this unless you use legacy
+ software.
source "drivers/mtd/ubi/Kconfig.debug"
endmenu
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index dd834e0..c9302a5 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -4,4 +4,4 @@ ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o scan.o
ubi-y += misc.o
ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
-ubi-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
+obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 49cd55a..fa61a3a 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -19,17 +19,68 @@
*/
/*
- * This file includes implementation of fake MTD devices for each UBI volume.
- * This sounds strange, but it is in fact quite useful to make MTD-oriented
- * software (including all the legacy software) to work on top of UBI.
+ * This is a small driver which implements fake MTD devices on top of UBI
+ * volumes. This sounds strange, but it is in fact quite useful to make
+ * MTD-oriented software (including all the legacy software) work on top of
+ * UBI.
*
* Gluebi emulates MTD devices of "MTD_UBIVOLUME" type. Their minimal I/O unit
- * size (mtd->writesize) is equivalent to the UBI minimal I/O unit. The
+ * size (@mtd->writesize) is equivalent to the UBI minimal I/O unit. The
* eraseblock size is equivalent to the logical eraseblock size of the volume.
*/
+#include <linux/sched.h>
#include <linux/math64.h>
-#include "ubi.h"
+#include <linux/module.h>
+#include <linux/mtd/ubi.h>
+#include <linux/mtd/mtd.h>
+#include "ubi-media.h"
+
+#define err_msg(fmt, ...) \
+ printk(KERN_DEBUG "gluebi (pid %d): %s: " fmt "\n", \
+ current->pid, __func__, ##__VA_ARGS__)
+
+/**
+ * struct gluebi_device - a gluebi device description data structure.
+ * @mtd: emulated MTD device description object
+ * @refcnt: gluebi device reference count
+ * @desc: UBI volume descriptor
+ * @ubi_num: UBI device number this gluebi device works on
+ * @vol_id: ID of UBI volume this gluebi device works on
+ * @list: link in a list of gluebi devices
+ */
+struct gluebi_device {
+ struct mtd_info mtd;
+ int refcnt;
+ struct ubi_volume_desc *desc;
+ int ubi_num;
+ int vol_id;
+ struct list_head list;
+};
+
+/* List of all gluebi devices */
+static LIST_HEAD(gluebi_devices);
+static DEFINE_MUTEX(devices_mutex);
+
+/**
+ * find_gluebi_nolock - find a gluebi device.
+ * @ubi_num: UBI device number
+ * @vol_id: volume ID
+ *
+ * This function seraches for gluebi device corresponding to UBI device
+ * @ubi_num and UBI volume @vol_id. Returns the gluebi device description
+ * object in case of success and %NULL in case of failure. The caller has to
+ * have the &devices_mutex locked.
+ */
+static struct gluebi_device *find_gluebi_nolock(int ubi_num, int vol_id)
+{
+ struct gluebi_device *gluebi;
+
+ list_for_each_entry(gluebi, &gluebi_devices, list)
+ if (gluebi->ubi_num == ubi_num && gluebi->vol_id == vol_id)
+ return gluebi;
+ return NULL;
+}
/**
* gluebi_get_device - get MTD device reference.
@@ -41,15 +92,18 @@
*/
static int gluebi_get_device(struct mtd_info *mtd)
{
- struct ubi_volume *vol;
+ struct gluebi_device *gluebi;
+ int ubi_mode = UBI_READONLY;
- vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
- /*
- * We do not introduce locks for gluebi reference count because the
- * get_device()/put_device() calls are already serialized at MTD.
- */
- if (vol->gluebi_refcount > 0) {
+ if (mtd->flags & MTD_WRITEABLE)
+ ubi_mode = UBI_READWRITE;
+
+ gluebi = container_of(mtd, struct gluebi_device, mtd);
+ mutex_lock(&devices_mutex);
+ if (gluebi->refcnt > 0) {
/*
* The MTD device is already referenced and this is just one
* more reference. MTD allows many users to open the same
@@ -58,7 +112,8 @@ static int gluebi_get_device(struct mtd_info *mtd)
* open the UBI volume again - just increase the reference
* counter and return.
*/
- vol->gluebi_refcount += 1;
+ gluebi->refcnt += 1;
+ mutex_unlock(&devices_mutex);
return 0;
}
@@ -66,11 +121,15 @@ static int gluebi_get_device(struct mtd_info *mtd)
* This is the first reference to this UBI volume via the MTD device
* interface. Open the corresponding volume in read-write mode.
*/
- vol->gluebi_desc = ubi_open_volume(vol->ubi->ubi_num, vol->vol_id,
- UBI_READWRITE);
- if (IS_ERR(vol->gluebi_desc))
- return PTR_ERR(vol->gluebi_desc);
- vol->gluebi_refcount += 1;
+ gluebi->desc = ubi_open_volume(gluebi->ubi_num, gluebi->vol_id,
+ ubi_mode);
+ if (IS_ERR(gluebi->desc)) {
+ mutex_unlock(&devices_mutex);
+ module_put(THIS_MODULE);
+ return PTR_ERR(gluebi->desc);
+ }
+ gluebi->refcnt += 1;
+ mutex_unlock(&devices_mutex);
return 0;
}
@@ -83,13 +142,15 @@ static int gluebi_get_device(struct mtd_info *mtd)
*/
static void gluebi_put_device(struct mtd_info *mtd)
{
- struct ubi_volume *vol;
-
- vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
- vol->gluebi_refcount -= 1;
- ubi_assert(vol->gluebi_refcount >= 0);
- if (vol->gluebi_refcount == 0)
- ubi_close_volume(vol->gluebi_desc);
+ struct gluebi_device *gluebi;
+
+ gluebi = container_of(mtd, struct gluebi_device, mtd);
+ mutex_lock(&devices_mutex);
+ gluebi->refcnt -= 1;
+ if (gluebi->refcnt == 0)
+ ubi_close_volume(gluebi->desc);
+ module_put(THIS_MODULE);
+ mutex_unlock(&devices_mutex);
}
/**
@@ -107,16 +168,12 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, unsigned char *buf)
{
int err = 0, lnum, offs, total_read;
- struct ubi_volume *vol;
- struct ubi_device *ubi;
-
- dbg_gen("read %zd bytes from offset %lld", len, from);
+ struct gluebi_device *gluebi;
if (len < 0 || from < 0 || from + len > mtd->size)
return -EINVAL;
- vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
- ubi = vol->ubi;
+ gluebi = container_of(mtd, struct gluebi_device, mtd);
lnum = div_u64_rem(from, mtd->erasesize, &offs);
total_read = len;
@@ -126,7 +183,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
if (to_read > total_read)
to_read = total_read;
- err = ubi_eba_read_leb(ubi, vol, lnum, buf, offs, to_read, 0);
+ err = ubi_read(gluebi->desc, lnum, buf, offs, to_read);
if (err)
break;
@@ -152,21 +209,17 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
* case of failure.
*/
static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+ size_t *retlen, const u_char *buf)
{
int err = 0, lnum, offs, total_written;
- struct ubi_volume *vol;
- struct ubi_device *ubi;
-
- dbg_gen("write %zd bytes to offset %lld", len, to);
+ struct gluebi_device *gluebi;
if (len < 0 || to < 0 || len + to > mtd->size)
return -EINVAL;
- vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
- ubi = vol->ubi;
+ gluebi = container_of(mtd, struct gluebi_device, mtd);
- if (ubi->ro_mode)
+ if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
lnum = div_u64_rem(to, mtd->erasesize, &offs);
@@ -181,8 +234,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
if (to_write > total_written)
to_write = total_written;
- err = ubi_eba_write_leb(ubi, vol, lnum, buf, offs, to_write,
- UBI_UNKNOWN);
+ err = ubi_write(gluebi->desc, lnum, buf, offs, to_write);
if (err)
break;
@@ -207,41 +259,36 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
{
int err, i, lnum, count;
- struct ubi_volume *vol;
- struct ubi_device *ubi;
-
- dbg_gen("erase %llu bytes at offset %llu", (unsigned long long)instr->len,
- (unsigned long long)instr->addr);
+ struct gluebi_device *gluebi;
if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize)
return -EINVAL;
-
if (instr->len < 0 || instr->addr + instr->len > mtd->size)
return -EINVAL;
-
if (mtd_mod_by_ws(instr->addr, mtd) || mtd_mod_by_ws(instr->len, mtd))
return -EINVAL;
lnum = mtd_div_by_eb(instr->addr, mtd);
count = mtd_div_by_eb(instr->len, mtd);
- vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
- ubi = vol->ubi;
+ gluebi = container_of(mtd, struct gluebi_device, mtd);
- if (ubi->ro_mode)
+ if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
- for (i = 0; i < count; i++) {
- err = ubi_eba_unmap_leb(ubi, vol, lnum + i);
+ for (i = 0; i < count - 1; i++) {
+ err = ubi_leb_unmap(gluebi->desc, lnum + i);
if (err)
goto out_err;
}
-
/*
* MTD erase operations are synchronous, so we have to make sure the
* physical eraseblock is wiped out.
+ *
+ * Thus, perform leb_erase instead of leb_unmap operation - leb_erase
+ * will wait for the end of operations
*/
- err = ubi_wl_flush(ubi);
+ err = ubi_leb_erase(gluebi->desc, lnum + i);
if (err)
goto out_err;
@@ -256,28 +303,38 @@ out_err:
}
/**
- * ubi_create_gluebi - initialize gluebi for an UBI volume.
- * @ubi: UBI device description object
- * @vol: volume description object
+ * gluebi_create - create a gluebi device for an UBI volume.
+ * @di: UBI device description object
+ * @vi: UBI volume description object
*
- * This function is called when an UBI volume is created in order to create
+ * This function is called when a new UBI volume is created in order to create
* corresponding fake MTD device. Returns zero in case of success and a
* negative error code in case of failure.
*/
-int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
+static int gluebi_create(struct ubi_device_info *di,
+ struct ubi_volume_info *vi)
{
- struct mtd_info *mtd = &vol->gluebi_mtd;
+ struct gluebi_device *gluebi, *g;
+ struct mtd_info *mtd;
- mtd->name = kmemdup(vol->name, vol->name_len + 1, GFP_KERNEL);
- if (!mtd->name)
+ gluebi = kzalloc(sizeof(struct gluebi_device), GFP_KERNEL);
+ if (!gluebi)
return -ENOMEM;
+ mtd = &gluebi->mtd;
+ mtd->name = kmemdup(vi->name, vi->name_len + 1, GFP_KERNEL);
+ if (!mtd->name) {
+ kfree(gluebi);
+ return -ENOMEM;
+ }
+
+ gluebi->vol_id = vi->vol_id;
mtd->type = MTD_UBIVOLUME;
- if (!ubi->ro_mode)
+ if (!di->ro_mode)
mtd->flags = MTD_WRITEABLE;
- mtd->writesize = ubi->min_io_size;
mtd->owner = THIS_MODULE;
- mtd->erasesize = vol->usable_leb_size;
+ mtd->writesize = di->min_io_size;
+ mtd->erasesize = vi->usable_leb_size;
mtd->read = gluebi_read;
mtd->write = gluebi_write;
mtd->erase = gluebi_erase;
@@ -285,60 +342,196 @@ int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
mtd->put_device = gluebi_put_device;
/*
- * In case of dynamic volume, MTD device size is just volume size. In
+ * In case of dynamic a volume, MTD device size is just volume size. In
* case of a static volume the size is equivalent to the amount of data
* bytes.
*/
- if (vol->vol_type == UBI_DYNAMIC_VOLUME)
- mtd->size = (long long)vol->usable_leb_size * vol->reserved_pebs;
+ if (vi->vol_type == UBI_DYNAMIC_VOLUME)
+ mtd->size = (unsigned long long)vi->usable_leb_size * vi->size;
else
- mtd->size = vol->used_bytes;
+ mtd->size = vi->used_bytes;
+
+ /* Just a sanity check - make sure this gluebi device does not exist */
+ mutex_lock(&devices_mutex);
+ g = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
+ if (g)
+ err_msg("gluebi MTD device %d form UBI device %d volume %d "
+ "already exists", g->mtd.index, vi->ubi_num,
+ vi->vol_id);
+ mutex_unlock(&devices_mutex);
if (add_mtd_device(mtd)) {
- ubi_err("cannot not add MTD device");
+ err_msg("cannot add MTD device");
kfree(mtd->name);
+ kfree(gluebi);
return -ENFILE;
}
- dbg_gen("added mtd%d (\"%s\"), size %llu, EB size %u",
- mtd->index, mtd->name, (unsigned long long)mtd->size, mtd->erasesize);
+ mutex_lock(&devices_mutex);
+ list_add_tail(&gluebi->list, &gluebi_devices);
+ mutex_unlock(&devices_mutex);
return 0;
}
/**
- * ubi_destroy_gluebi - close gluebi for an UBI volume.
- * @vol: volume description object
+ * gluebi_remove - remove a gluebi device.
+ * @vi: UBI volume description object
*
- * This function is called when an UBI volume is removed in order to remove
+ * This function is called when an UBI volume is removed and it removes
* corresponding fake MTD device. Returns zero in case of success and a
* negative error code in case of failure.
*/
-int ubi_destroy_gluebi(struct ubi_volume *vol)
+static int gluebi_remove(struct ubi_volume_info *vi)
{
- int err;
- struct mtd_info *mtd = &vol->gluebi_mtd;
+ int err = 0;
+ struct mtd_info *mtd;
+ struct gluebi_device *gluebi;
+
+ mutex_lock(&devices_mutex);
+ gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
+ if (!gluebi) {
+ err_msg("got remove notification for unknown UBI device %d "
+ "volume %d", vi->ubi_num, vi->vol_id);
+ err = -ENOENT;
+ } else if (gluebi->refcnt)
+ err = -EBUSY;
+ else
+ list_del(&gluebi->list);
+ mutex_unlock(&devices_mutex);
+ if (err)
+ return err;
- dbg_gen("remove mtd%d", mtd->index);
+ mtd = &gluebi->mtd;
err = del_mtd_device(mtd);
- if (err)
+ if (err) {
+ err_msg("cannot remove fake MTD device %d, UBI device %d, "
+ "volume %d, error %d", mtd->index, gluebi->ubi_num,
+ gluebi->vol_id, err);
+ mutex_lock(&devices_mutex);
+ list_add_tail(&gluebi->list, &gluebi_devices);
+ mutex_unlock(&devices_mutex);
return err;
+ }
+
kfree(mtd->name);
+ kfree(gluebi);
return 0;
}
/**
- * ubi_gluebi_updated - UBI volume was updated notifier.
- * @vol: volume description object
+ * gluebi_updated - UBI volume was updated notifier.
+ * @vi: volume info structure
*
- * This function is called every time an UBI volume is updated. This function
- * does nothing if volume @vol is dynamic, and changes MTD device size if the
+ * This function is called every time an UBI volume is updated. It does nothing
+ * if te volume @vol is dynamic, and changes MTD device size if the
* volume is static. This is needed because static volumes cannot be read past
- * data they contain.
+ * data they contain. This function returns zero in case of success and a
+ * negative error code in case of error.
+ */
+static int gluebi_updated(struct ubi_volume_info *vi)
+{
+ struct gluebi_device *gluebi;
+
+ mutex_lock(&devices_mutex);
+ gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
+ if (!gluebi) {
+ mutex_unlock(&devices_mutex);
+ err_msg("got update notification for unknown UBI device %d "
+ "volume %d", vi->ubi_num, vi->vol_id);
+ return -ENOENT;
+ }
+
+ if (vi->vol_type == UBI_STATIC_VOLUME)
+ gluebi->mtd.size = vi->used_bytes;
+ mutex_unlock(&devices_mutex);
+ return 0;
+}
+
+/**
+ * gluebi_resized - UBI volume was re-sized notifier.
+ * @vi: volume info structure
+ *
+ * This function is called every time an UBI volume is re-size. It changes the
+ * corresponding fake MTD device size. This function returns zero in case of
+ * success and a negative error code in case of error.
+ */
+static int gluebi_resized(struct ubi_volume_info *vi)
+{
+ struct gluebi_device *gluebi;
+
+ mutex_lock(&devices_mutex);
+ gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
+ if (!gluebi) {
+ mutex_unlock(&devices_mutex);
+ err_msg("got update notification for unknown UBI device %d "
+ "volume %d", vi->ubi_num, vi->vol_id);
+ return -ENOENT;
+ }
+ gluebi->mtd.size = vi->used_bytes;
+ mutex_unlock(&devices_mutex);
+ return 0;
+}
+
+/**
+ * gluebi_notify - UBI notification handler.
+ * @nb: registered notifier block
+ * @l: notification type
+ * @ptr: pointer to the &struct ubi_notification object
*/
-void ubi_gluebi_updated(struct ubi_volume *vol)
+static int gluebi_notify(struct notifier_block *nb, unsigned long l,
+ void *ns_ptr)
{
- struct mtd_info *mtd = &vol->gluebi_mtd;
+ struct ubi_notification *nt = ns_ptr;
+
+ switch (l) {
+ case UBI_VOLUME_ADDED:
+ gluebi_create(&nt->di, &nt->vi);
+ break;
+ case UBI_VOLUME_REMOVED:
+ gluebi_remove(&nt->vi);
+ break;
+ case UBI_VOLUME_RESIZED:
+ gluebi_resized(&nt->vi);
+ break;
+ case UBI_VOLUME_UPDATED:
+ gluebi_updated(&nt->vi);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
- if (vol->vol_type == UBI_STATIC_VOLUME)
- mtd->size = vol->used_bytes;
+static struct notifier_block gluebi_notifier = {
+ .notifier_call = gluebi_notify,
+};
+
+static int __init ubi_gluebi_init(void)
+{
+ return ubi_register_volume_notifier(&gluebi_notifier, 0);
}
+
+static void __exit ubi_gluebi_exit(void)
+{
+ struct gluebi_device *gluebi, *g;
+
+ list_for_each_entry_safe(gluebi, g, &gluebi_devices, list) {
+ int err;
+ struct mtd_info *mtd = &gluebi->mtd;
+
+ err = del_mtd_device(mtd);
+ if (err)
+ err_msg("error %d while removing gluebi MTD device %d, "
+ "UBI device %d, volume %d - ignoring", err,
+ mtd->index, gluebi->ubi_num, gluebi->vol_id);
+ kfree(mtd->name);
+ kfree(gluebi);
+ }
+ ubi_unregister_volume_notifier(&gluebi_notifier);
+}
+
+module_init(ubi_gluebi_init);
+module_exit(ubi_gluebi_exit);
+MODULE_DESCRIPTION("MTD emulation layer over UBI volumes");
+MODULE_AUTHOR("Artem Bityutskiy, Joern Engel");
+MODULE_LICENSE("GPL");
--
1.6.0.6
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
More information about the linux-mtd
mailing list