[PATCH] [MTD] [NAND] pxa3xx_nand: add single-bit error corrections reporting

[Mike Rapoport]

David, Eric
Any update on this?

Mike Rapoport wrote:
> From: Yeasah Pell <yeasah at comrex.com>
> 
> Signed-off-by: Yeasah Pell <yeasah at comrex.com>
> Signed-off-by: Mike Rapoport <mike at compulab.co.il>
> ---
>  drivers/mtd/nand/pxa3xx_nand.c |   17 ++++++++++++-----
>  1 files changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 30a8ce6..6ea520a 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -102,6 +102,7 @@ enum {
>  	ERR_SENDCMD	= -2,
>  	ERR_DBERR	= -3,
>  	ERR_BBERR	= -4,
> +	ERR_SBERR	= -5,
>  };
>  
>  enum {
> @@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
>  
>  	status = nand_readl(info, NDSR);
>  
> -	if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
> +	if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
>  		if (status & NDSR_DBERR)
>  			info->retcode = ERR_DBERR;
> +		else if (status & NDSR_SBERR)
> +			info->retcode = ERR_SBERR;
>  
> -		disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
> +		disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
>  
>  		if (info->use_dma) {
>  			info->state = STATE_DMA_READING;
> @@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
>  		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
>  			break;
>  
> -		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
> +		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
>  
>  		/* We only are OOB, so if the data has error, does not matter */
>  		if (info->retcode == ERR_DBERR)
> @@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
>  		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
>  			break;
>  
> -		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
> +		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
>  
>  		if (info->retcode == ERR_DBERR) {
>  			/* for blank page (all 0xff), HW will calculate its ECC as
> @@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
>  	 * consider it as a ecc error which will tell the caller the
>  	 * read fail We have distinguish all the errors, but the
>  	 * nand_read_ecc only check this function return value
> +	 *
> +	 * Corrected (single-bit) errors must also be noted.
>  	 */
> -	if (info->retcode != ERR_NONE)
> +	if (info->retcode == ERR_SBERR)
> +		return 1;
> +	else if (info->retcode != ERR_NONE)
>  		return -1;
>  
>  	return 0;

-- 
Sincerely yours,
Mike.