ubiattach problem

[Oren]

ubinize: LEB size:      126976
ubinize: PEB size:      131072
ubinize: min. I/O size: 2048
ubinize: sub-page size: 2048
ubinize: VID offset:    2048
ubinize: data offset:   4096
ubinize: loaded the ini-file "images/ubinize.cfg"
ubinize: count of sections: 1

ubinize: parsing section "ubifs"
ubinize: mode=ubi, keep parsing
ubinize: volume type: dynamic
ubinize: volume ID: 0
ubinize: volume size: 16777216 bytes
ubinize: volume name: NAND-block1
ubinize: volume alignment: 1
ubinize: autoresize flags found
ubinize: adding volume 0
ubinize: writing volume 0
ubinize: image file: images/ubifs_ncomp.img

ubinize: writing layout volume
ubinize: done

On Tue, 2009-07-07 at 15:51 +0300, Artem Bityutskiy wrote:
> On Tue, 2009-07-07 at 15:08 +0300, Oren wrote:
> > mkfs.ubifs/mkfs.ubifs -r ~/BRCMLinux/Linux_2_6_27/mtd-utils/myrfs
> > --compr="none" -m 2048 -e 129024 -c 2047 -o images/ubifs_ncomp.img
> > ubi-utils/ubinize -o images/ubi_ncomp.img -m 2048 -p 128KiB -s 2048
> > images/ubinize.cfg
> > 
> > 
> > ubinize.cfg:
> > 
> > [ubifs]
> > mode=ubi
> > image=images/ubifs_ncomp.img
> > vol_id=0
> > vol_size=16MiB
> > vol_type=dynamic
> > vol_name=rootfs
> > vol_flags=autoresize
> > 
> 
> Can you add -v to ubinize and see if there is a
> "writing layout volume" print?
>