[PATCH] MTD: NAND: pxa3xx_nand: add ability to keep controller settings defined by OBM/bootloader
Mike Rapoport
mike at compulab.co.il
Tue Jan 20 02:33:48 EST 2009
Signed-off-by: Mike Rapoport <mike at compulab.co.il>
---
arch/arm/mach-pxa/include/mach/pxa3xx_nand.h | 3 +
drivers/mtd/nand/pxa3xx_nand.c | 103 +++++++++++++++++++++++++-
2 files changed, 105 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
index eb35fca..3478eae 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -49,6 +49,9 @@ struct pxa3xx_nand_platform_data {
*/
int enable_arbiter;
+ /* allow platform code to keep OBM/bootloader defined NFC config */
+ int keep_config;
+
const struct mtd_partition *parts;
unsigned int nr_parts;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index ead4a7a..2857a6a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -171,7 +171,13 @@ static int use_dma = 1;
module_param(use_dma, bool, 0444);
MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
-#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
+/*
+ * Default NAND flash controller configuration setup by the
+ * bootloader. This configuration is used only when pdata->keep_config is set
+ */
+static struct pxa3xx_nand_timing default_timing;
+static struct pxa3xx_nand_flash default_flash;
+
static struct pxa3xx_nand_cmdset smallpage_cmdset = {
.read1 = 0x0000,
.read2 = 0x0050,
@@ -198,6 +204,7 @@ static struct pxa3xx_nand_cmdset largepage_cmdset = {
.lock_status = 0x007A,
};
+#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
static struct pxa3xx_nand_timing samsung512MbX16_timing = {
.tCH = 10,
.tCS = 0,
@@ -297,9 +304,23 @@ static struct pxa3xx_nand_flash *builtin_flash_types[] = {
#define NDTR1_tWHR(c) (min((c), 15) << 4)
#define NDTR1_tAR(c) (min((c), 15) << 0)
+#define tCH_NDTR0(r) (((r) >> 19) & 0x7)
+#define tCS_NDTR0(r) (((r) >> 16) & 0x7)
+#define tWH_NDTR0(r) (((r) >> 11) & 0x7)
+#define tWP_NDTR0(r) (((r) >> 8) & 0x7)
+#define tRH_NDTR0(r) (((r) >> 3) & 0x7)
+#define tRP_NDTR0(r) (((r) >> 0) & 0x7)
+
+#define tR_NDTR1(r) (((r) >> 16) & 0xffff)
+#define tWHR_NDTR1(r) (((r) >> 4) & 0xf)
+#define tAR_NDTR1(r) (((r) >> 0) & 0xf)
+
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)(((ns) * (clk / 1000000) / 1000) - 1)
+/* convert nand flash controller clock cycles to nano-seconds */
+#define cycle2ns(c, clk) ((((c) + 1) * 1000000 + clk / 500) / (clk / 1000))
+
static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
const struct pxa3xx_nand_timing *t)
{
@@ -921,6 +942,82 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
return 0;
}
+static void pxa3xx_nand_detect_timing(struct pxa3xx_nand_info *info,
+ struct pxa3xx_nand_timing *t)
+{
+ unsigned long nand_clk = clk_get_rate(info->clk);
+ uint32_t ndtr0 = nand_readl(info, NDTR0CS0);
+ uint32_t ndtr1 = nand_readl(info, NDTR1CS0);
+
+ t->tCH = cycle2ns(tCH_NDTR0(ndtr0), nand_clk);
+ t->tCS = cycle2ns(tCS_NDTR0(ndtr0), nand_clk);
+ t->tWH = cycle2ns(tWH_NDTR0(ndtr0), nand_clk);
+ t->tWP = cycle2ns(tWP_NDTR0(ndtr0), nand_clk);
+ t->tRH = cycle2ns(tRH_NDTR0(ndtr0), nand_clk);
+ t->tRP = cycle2ns(tRP_NDTR0(ndtr0), nand_clk);
+
+ t->tR = cycle2ns(tR_NDTR1(ndtr1), nand_clk);
+ t->tWHR = cycle2ns(tWHR_NDTR1(ndtr1), nand_clk);
+ t->tAR = cycle2ns(tAR_NDTR1(ndtr1), nand_clk);
+}
+
+static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+{
+ uint32_t ndcr = nand_readl(info, NDCR);
+ struct nand_flash_dev *type = NULL;
+ uint32_t id = -1;
+ int i;
+
+ default_flash.page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
+ default_flash.page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
+ default_flash.flash_width = ndcr & NDCR_DWIDTH_M ? 16 : 8;
+ default_flash.dfc_width = ndcr & NDCR_DWIDTH_C ? 16 : 8;
+
+ if (default_flash.page_size == 2048)
+ default_flash.cmdset = &largepage_cmdset;
+ else
+ default_flash.cmdset = &smallpage_cmdset;
+
+ /* set info fields needed to __readid */
+ info->flash_info = &default_flash;
+ info->read_id_bytes = (default_flash.page_size == 2048) ? 4 : 2;
+ info->reg_ndcr = ndcr;
+
+ if (__readid(info, &id))
+ return -ENODEV;
+
+ /* Lookup the flash id */
+ id = (id >> 8) & 0xff; /* device id is byte 2 */
+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+ if (id == nand_flash_ids[i].id) {
+ type = &nand_flash_ids[i];
+ break;
+ }
+ }
+
+ if (!type)
+ return -ENODEV;
+
+ /* fill the missing flash information */
+ i = __ffs(default_flash.page_per_block * default_flash.page_size);
+ default_flash.num_blocks = type->chipsize << (20 - i);
+
+ info->oob_size = (default_flash.page_size == 2048) ? 64 : 16;
+
+ /* calculate addressing information */
+ info->col_addr_cycles = (default_flash.page_size == 2048) ? 2 : 1;
+
+ if (default_flash.num_blocks * default_flash.page_per_block > 65536)
+ info->row_addr_cycles = 3;
+ else
+ info->row_addr_cycles = 2;
+
+ pxa3xx_nand_detect_timing(info, &default_timing);
+ default_flash.timing = &default_timing;
+
+ return 0;
+}
+
static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
const struct pxa3xx_nand_platform_data *pdata)
{
@@ -928,6 +1025,10 @@ static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
uint32_t id = -1;
int i;
+ if (pdata->keep_config)
+ if (pxa3xx_nand_detect_config(info) == 0)
+ return 0;
+
for (i = 0; i<pdata->num_flash; ++i) {
f = pdata->flash + i;
--
1.5.6.4
More information about the linux-mtd
mailing list