ubiattach taking very long time

[twebb]

> Does it make any sense that a ubiattach would take > 20 secs?  The
> flash I'm using is Samsung 4GiB MLC NAND flash.  I'm running 2.6.28
> kernel.  Here's the capture...
>
> [    1.753280] Creating 6 MTD partitions on "Samsung 32Gibx8":
> [    1.758855] 0x000000000000-0x000000080000 : "bootloader-alt"
> [    1.765676] 0x000000080000-0x000000100000 : "environment-alt"
> [    1.772290] 0x000000100000-0x000000400000 : "kernel-alt"
> [    1.778403] 0x000000400000-0x000000800000 : "kernelrecovery-alt"
> [    1.785252] 0x000000800000-0x000004000000 : "maintenance"
> [    1.791577] 0x000004000000-0x000100000000 : "system"
> [    1.799725] UBI: attaching mtd5 to ubi0
> [    1.803630] UBI: physical eraseblock size:   524288 bytes (512 KiB)
> [    1.809901] UBI: logical eraseblock size:    516096 bytes
> [    1.815365] UBI: smallest flash I/O unit:    4096
> [    1.820067] UBI: VID header offset:          4096 (aligned 4096)
> [    1.826109] UBI: data offset:                8192
> [   23.124750] UBI: attached mtd5 to ubi0
> [   23.128505] UBI: MTD device name:            "system"
> [   23.133702] UBI: MTD device size:            4032 MiB
> [   23.138757] UBI: number of good PEBs:        8064
> [   23.143495] UBI: number of bad PEBs:         0
> [   23.147945] UBI: max. allowed volumes:       128
> [   23.152592] UBI: wear-leveling threshold:    256
> [   23.157211] UBI: number of internal volumes: 1
> [   23.161689] UBI: number of user volumes:     4
> [   23.166135] UBI: available PEBs:             4
> [   23.170612] UBI: total number of reserved PEBs: 8060
> [   23.175584] UBI: number of PEBs reserved for bad PEB handling: 80
> [   23.181715] UBI: max/mean erase counter: 2/0
> [   23.186120] UBI: background thread "ubi_bgt0d" started, PID 421
>

Does anyone have any suggestions on this problem?  I feel certain that
I must have something configured wrong that results in the long attach
time, but everything else seems to work just fine.

Thanks,
twebb